Power Transformers Dealers in Ecil, Hyderabad

• Cooling Type: Air Cooled
• Mounting Type: Fixed
• Power Rating: 25 kVA
• Number of Phase: 3-Phase
• Voltage Ratio: 440V
• Winding Material: Copper
• Output Voltage: 220V

• Phase: Singe Phase, Three Phase
• Features: currents result in low power factor & lot of harmonics, require additional consideration in design.
• Range: 1 VA to 250 KVA
• Frequency: 20 to 500,000 Hz
• Enclosure: Generally open type IP00 dry type

We manufacture a wide range of isolation transformers, which are commonly used to decouple two circuits. Our transformers are designed with careful attention to capacitive coupling between the two windings i.e. Input and output windings. We make sure that high quality raw material is used while manufacturing the transformer. We manufacture transformer using symmetrical windings. Widely used in : computer installationslaboratory instrumentscell phone networkstextile machinerybio medical equipment features : eliminates noise, spikes, surges and transientsprovide flux pathsexcellent quality powerhigh capacity to alter frequency technical specifications : inputoutput415vac3ph415vac3ph415vac3ph220vac3ph230vaclph230vac3ph230vaclph110vac1ph specifications : construction standardsasper is2026 part i&llsystem connectionsdelta/star, star/delta, star/starratios1:1 and 2:1regulationbetter than 3.5%powerfactor0.75 lead to 0.75 lagdi-electric strength3 kv for 60 secinsulation resistancebetter than l000 mega ohmscoupling capacitance0.01pf for l00 dbleakage currentlessthan 20 microarnpscommon mode attenuation100db/120dbtype of executionclosed typeoperating temperature0 c to 45 ctype of coolingnatural air/forced air/oil cooled

• Phase: 50 Hz in voltages of 11 KV, 22 KV and 33 KV
• Off-circuit tap changer to provide: +5% to -5% in steps of 2.5% (or as specified by customer)
• On-load tap changer to provide: +5% to -15% in steps of 1.25% (or as specified by customer)
• Painting: as per IS / IEC standards
• Vector group: Dyn 11
• Standard fittings: as per IS: 2026 / IEC 76 / BIS 1180
• HV side: cable box/Bare Bushings
• LV side: cable box / bus duct

  Subjected to rigorous and strict quality controls at every stage of manufacturing, Designed to meet latest national international standards like BIS, IS, IEC, ANSI, BS, DIN, etc., Wide range of Transformers duly tested at Central Power Research Institute, Bangalore , Bhopal Quality assurance programme available     MOST SUITABLE FOR Tube Mills Telecom Centers Rice Mills Rolling Plants Educational Institutions Cold Storage Clubs Pharmaceuticals Units Residential & Commercial  Food Processing Unit  

• Type: Inverter Transformer
• Color: Grey
• Brand Name: SERVOMAX INDIA
• Condition: New
• Certfication: ISO 9001:2008 Certified
• Cooling System: Oil Cooled

description: subjected to rigorous and strict quality controls at every stage of manufacturing designed to meet latest national international standards like is, iec, ansi, bs, din, etc. wide range of transformers duly tested at central power research institute, bangalore quality assurance programme available  .

Our Isolation Transformers have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

We are the main supplier of this product.

SERVOMAX make Transformers with built-in rolling contact type AVR suitable for indooroutdoor installation, copper wound HT Two-in-one system is a revolutionary landmark in the industry when it comes to voltage regulation and stabilization.

SERVOMAX has a wide range of ISOLATION TRANSFORMERS which reduce the effects of power Line problems like noise, spikes, surges, transients and neutral, to a minimum.

We supply high quality Power Transformer appropriate for three phases, 50/60 c/s power frequency. Our power transformers are extremely perfect for both outdoor and indoor applications. We fabricate transformers as per the is 1180 & 2026 standards. Ranges double wound transformerssingle & three phase 50 / 60 c/s upto 2 mva )inductive reactors auto wound transformers dry type transformers furnace transformers impedance transformers test conducted as per is standards measurement of insulation strength measurement of resistance / windingturns ratio on all tap positionsmeasurement of impedance / load loss impulse test withst and test induced over voltage withstand testtemperature rise test features three winding transformers in customized designs high quality insulating material used such as polyester, fiber, paper, board, glass tape, etc.extra tappings available tank constructed from mild steel surfaces coated with epoxy based paints applications railways construction industry engineering industry.

High power transformer, We are Manufacturers of one of the finest & beautiful Power transformer taking meticulous care with a series of pre & post testing carried out. We design these transformers in different precise patterns based on the requirements of our clients and is widely applicable for domestic and small industries. Iron core type power distribution transformers are offered for large power distribution system in 3 or 1 phase version with primary voltage up to 132 KV & secondary voltage ranging from 3.3 to 33 KV and capacity 3.15 to 20 MVA. We manufacture these power transformers in two types namely power distribution transformers and single phase power transformers.

• Output Voltage:  
• System Connections:  
• Delta / Star: Input Voltage
•  : 415V 3 Phase
• 415V or 200V 3 Phase: Ratios
•  : 1:1 and 2:1
• Regulation:  
• Better than 3.5 %: Power Factor
•  : 0.75 Lead to 0.75 Lag
• Di-electric Strength:  
• 3KV for 60 sec: Insulation Resistance
•  : Better than 1000Mega Ohms
• Coupling Capacitance:  
• 0.1 PF for 80 db: Leakage Current
•  : Less than 20 Micro Amps
• Common Mode Attenuation:  
• 80 db / 100 db: Construction Standards
•  : As per IS 2026 Part I & II, IS 11171
• Type of Execution:  
• Closed Type: Operating Temperature
•  : 0° C to 45° C
• Type of cooling:  

inverter transformers, Single Phase Transformers, inverter transformers

Power Supply Transformer, power supply smps, High Voltage Transformers

Stabilizers, Ups, static stabilizers, Stabilizers, ups equipment

Electrical Transformer, Distribution Transformer, Power Transformers

solar transformer, Pulse Width Modulated Inverter

Power Transformers, Distribution Transformers, Transformers