Radiation Detectors Dealers in Cherlapalli, Hyderabad

• Operating Voltage Range: 900–1000V
• Backgroud (typical) with 40 mm lead shielding: 900 cpm
• Efficiency: ≥ 8% for Cs-137 at 1 cm

This essentially consists of a 2” x 2” NaI Integral detector, with PMT HV bleeder wired & enclosed in a cylindrical shell with appropriate connector brought out for applying HV bias to PMT & also for taking signal output to the Radiation Counting System. This probe with NaI crystal facing downwards is placed in a sample holder having slotted arrangement for placing sample tray. Samples either filter paper deposited air activity sample or in a SS planchet can be kept for gross gamma activity counting. This Radiation counting system cannot be used for selection of a specific energy band. For applications requiring counting for a specific energy band one has to opt for Gamma ray spectrometer.

• Type: RC705 I/E
• Size: 106W x 196L x 105Ht in mm (Approx.)
• Material: A. Built in detector scintillator size 1” x 1”. B. External detector with scintillator size 1” x 1”.

Rad Check Meter Type : RC 705I manufactured by NUCLEONIX SYSTEMS is primarily designed to inspect & measure Radioactive Contamination (RaC) in steel samples such as billets, rods, rounds, flates, castings, Automotive / Engineering components etc. Components in different sizes & shapes can be inspected by this meter. This Rad Check Meter is widely used globally by many steel industries. This is a Portable Hand Held Meter, designed around integrally coupled 1" x 1" NaI (Tl) Scintillator to a 1" x 1.5" PMT, will offer an optimum performance in counting Low-Level Gamma contamination. This unit has Two modes of measurement namely Doserate mode & countrate mode. In doserate mode it measures in two 'Unit' i.e., nSv/hr and in countrate mode it can measure in CPS & also in CPM modes. Dose rates close to natural background levels can be measured accurately. This Rad Check Meter is an ideal choice for the Recycled steel /casting industry & Engineering component industry & serves as a good quality assurance (QA) tool to check for Radioactive Contamination (RaC). This unit employs micro controller based design and has number of unique features. User can store upto 1000 readings at the press of a button and can recall back, for visual indication on a dot matrix LCD display. This unit is provided with a built-in Serial port (optionally) through which the stored data can be down loaded into PC.

radiation detectors, pre amplifiers, Power Supplies, instrumentation bins