Ramdas G Jeedimetla, Hyderabad, Telangana

These cables are used for transmitting power from the generator mounted in the nacelle of the wind tower to base station. These are flexible cables made of special elastomeric compounds, so as to meet the torsional stresses exerted on the cable due to rotation of the nacelle in relation to wind direction.   Control & Instrumentation Cables These Cables are used in Wind Energy applications such as rotor blade pitch control, Yaw control, Top box, Anemometer feed back, Remote data logging etc. Construction of Cables shall be as per Customers' requirement and conforming to various National/International Standards.

These cables are used in conveyor machinery such as transfer cars, boom-stackers, side arm chargers, bulk material conveyors etc. They find application in almost every industry segment like Steel Mills, Cement Plants, Docks, Power Plants, Automobile Industries & Refineries and Petrochemicals.

Screening :Individual andor overall with following options - - Aluminum MylarCopper Tape with Tinned Copper Drain Wire or - Braided with Bare or Tinned or Nickel Plated or Silver Plated Copper. Inner Sheath:PVC HRPVC FRPVC FRLS PVC ZHFR LSF PTFE Fibre Glass. Outer sheath :PVC HRPVC FRPVC FRLS PVC ZHFR LSF PTFE Fibre Glass. Note:Other conductor sizes and insulation materials on request.

Primary Insulation - General purpose PVC HEAT RESISTANT PVC LDPE XLPE PTFE Fibre Glass FEP Silicone Rubber. Screening:Individual andor overall with following options -- Aluminum MylarCopper Tape with Tinned Copper Drain Wire or - Braided with Bare or Tinned or Nickel Plated or Silver Plated Copper. Outer sheath :PVC HRPVC FRPVC FRLS PVC ZHFR LSF PTFE Fibre Glass.

Construction - Single or Multiple Pairs Voltage Grade Up to 1100 V Cable Code - Kx,Kx(A), Tx,Jx,Ex,Sx Rx,Bx,Nx,Ux,Wx Range - 16 AWG 18 AWG 20 AWG up to 48 Pair Primary Insulation - General purpose PVC HEAT RESISTANT PVC LDPE XLPE PTFE Fibre Glass FEP Silicone Rubber Screening - Individual andor overall with following options - - Aluminum MylarCopper Tape with Tinned Copper Drain Wire or - Braided with Bare or Tinned or Nickel Plated or Silver Plated Copper

Solar photovoltaic cables are used for transmitting electrical power generated from the solar panel to the charging units, battery banks, change over systems, inverters etc. The cables that are used to carry power from the solar panels to the charging units have to function effectively while remaining exposed to a wide range of severe environmental conditions.

In addition to these, combinations from the following colours can also be offered -Red, Black, Blue, Brown, Green, Grey, Orange, Violet, White, Yellow.Alternately, any single colour insulation on all cores with number printing can also be provided.

Constructiion - Single core Multicore Voltage Grade Up to 1100 V Conductor - Aluminum Copper, Solid Standard Flexible Conductor Range - Single core up to 1000 Sq mm Multicore up to 400 Sq mm Max 61 cores of 1.5 Sq mm & 2.5 Sq mm Primary Insulation - General Purpose PVC Heat Resistant PVC LDPE XLPE Inner Sheath - PVC HRPVC FRPVC FRLS PVC ZHFR LSF

Instrumentation Cables are specially designed to transmit signals without any external interference. They are used in Data Acquisition Systems, connections to Instruments, Computer Networking, PA Systems, Digital / Analog Control / Measuring & Communication Systems.

High temperature cables are used in areas where both working temperatures and ambient temperatures are too high. They are made with a wide range of conductors, insulating materials and screening materials depending on the temperatures and conditions under which the cable has to perform.    

These heavy duty elastomer cables are used in generators, heavy machinery, portable power tools and equipment, moving machinery in wet, hot or oily environments. Their flexibility permits use in constricted spaces with sharp and complex bends. They can be made with special abrasion resistant sheaths to withstand rough use in portable equipment.

These Cables are meant for bi-directional communications protocol used for communications among field devices and to the control system. Installed in many process applications such as refining, petrochemicals, power generation, even in food & beverage, pharmaceuticals and nuclear applications.

Finds applications where electrical integrity of the cable has to remain intact for at least three hours, so as toactivate and maintain crucial functions such as fire fighting, public announcements, smoke extraction systems, sprinklers, emergency lighting, evacuation path lighting systems etc. The areas for Fire resistant cable applications include places where large number of people congregate for short or limited period of time such as shopping malls, cinema theaters, educational institutions, airport terminals, mass transit systems (metro rail networks), high rise office buildings etc. FR cables also find use in power generation facilities, petrochemical complexes, nuclear power facilities, mines etc. for phased shut down of the plant and to keep critical functions like communication, rescue and evacuation systems functional during a fire.

Instrumentation Cables are specially designed to transmit signals without any external interference. They are used in Data Acquisition Systems, connections to Instruments, Computer Networking, PA Systems, Digital Analog Control Measuring & Communication Systems.

Constructiion - Single core Multicore Voltage Grade Up to 1100 V Conductor - Aluminum Copper, Solid Standard Flexible Conductor Range - Single core up to 1000 Sq mm Multicore up to 400 Sq mm Max 61 cores of 1.5 Sq mm & 2.5 Sq mm Primary Insulation - General Purpose PVC Heat Resistant PVC LDPE XLPE Inner Sheath - PVC HRPVC FRPVC FRLS PVC ZHFR LSF

The Cable will be constructed with one Conductor (Normally ATC) with LDPE as Primary Insulation. A woven Mesh ( Braiding) surrounding the Insulated Core forms the second Conductor and Outer PVC Sheathing will be done above Braiding. These Cables are used for VHF (Very High Frequency) Signal transmission.

High temperature cables are used in areas where both working temperatures and ambient temperatures are too high. They are made with a wide range of conductors, insulating materials and screening materials depending on the temperatures and conditions under which the cable has to perform.

These cables are used in conveyor machinery such as transfer cars, boom-stackers, side arm chargers, bulk material conveyors etc. They find application in almost every industry segment like steel mills, cement plants, docks, power plants, automobile industries & refineries and petrochemicals.

These cables will be with 0.5 or 0.63 mm dia ATC Conductor with 0.3 to 0.4 mm Insulation thickness of PVC or HR PVC. Individual pair may be with or without polyester tape lapping. The cables will be Unarmoured for indoor applications and Armoured for outdoor applications and are with or without Screening.

Rope-lay stranded, flexible class 6 bare copper conductors, insulated with flexible elastomer compound. To be cused for inter connection of batteries (jumper cables) in moving platforms such as electric forklifts, golf carts or cother battery powered vehicles.

Tinnedbare copper conductor, insulated with thermosetting compounds, shieldedunshielded cables with armors of copper, ss wires, bronze wires etc, and sheathing of SHF 1 and SHF 2, both in fire retardant and circuit integrity versions. For use in shipboard power, control, signaling and communication applications, for oil exploration work in both on shore and off shore applications, mast lighting etc.