Rfid Dealers in Hyderabad

• Country of Origin: Made in India
• Type Of Reader: Card Reader
• Display Type: Digital
• Power Supply: 6-9V
• Battery Backup: 2-4 hours
• Scan Speed: 0-100 Scans/sec
• Power Source: USB BUS Power
• Reading Range: 4 - 10 m
• Operating System: Windows
• Language: English
• Frequency Mode: Fixed-Frequency Emission Mode

• Users: 30,000 Cards
• Transaction: 1,00,000 Logs
• CPU: 32 bit High End Microprocessor
• Identification speed:: <= 1 sec
• FAR: <=0.0001 % FRR: <=1%

  S990A Optional Features: Push Data Technology GPRS , Web server, Wi-FiInternal battery back up upto 4 hours Mifare / HID proximity   Standalone RFID Time Attendance and Access Control Terminal Users:  30,000 Cards           Transaction:   1,00,000  Logs           CPU:  32 bit High End Microprocessor           Identification  speed: 

• Brand Name: STL
• Battery Back-up (In hours): 8 - 12
• Warranty: 12 Month(s)
• Communication: Mini USB, TCP/IP, USB, Wifi/GPRS

we are offering rfid reader with active tags.gae - has newly developed a 2.4ghz rfid active reader & to meet different needs with 2.4ghz active tags in vehicle access control, vehicle toll collection, healthcare, rfid asset tracking, manufacturing, personnel tracking and building security and access control applications. With an external omni-directional antenna, this 2.4ghz reader is suitable for a number of rtls (real time location system) applications including asset tracking, warehouse management, logistics, and student management and so on. This 2.4ghz rfid reader can ensure whether the tracking products are in the visibility range of around 30 meters from the reader or not, since it has the ability of identifying a number of active tags within 30 meters simultaneously. And by working with an omni-directional antenna, it can identify tags in all directions, thus providing a high working accuracy. Active rfid tags have their own internal power source, which is used to power the integrated circuits and broadcast the signal to the reader. If the reader has received the signal from tag, the reader will send the data to the server computer to locate each of the tags. Moreover, it also provides rs232 & rs485 ports for data communication. The rf tag uses the ieee 802.15.4 standard protocol which makes the tag to function as a rfd (reduced functionality device) associating to a coordinator (fully functional devicereader), periodically waking up transmitting data and sleeping again, in the same personal area network. In all, this active rfid reader is available in operating from ism 2.4ghz to 2.5ghz to be deployed in any indoor or outdoor environments for various rtls applications. And it can offer an impressive long read range of up to 30 meters by integrating with an external antenna.

• Brand Name: Alien

We are offering rfid label. Uhf rfid 4x4 inch lables alien aln-9640-fwrc tags (squiggle inlay, higgs3, fc, clear). Label paper material � pure white ( capable of sticking onto cartons) paper thickness � 70-80 gsm release paper thickness � 65 gsm adhesive � will stick to cartons with shelf life of 1 year.

In present days, in our global evolution people like businessmen, employees no one will there without having a car. Mainly in cities, many of the cars are being used by the people for offices, shopping’s and for many more. But the main problem here is where to park these vehicles, because the parking place of the cars may be so congested, in some places as the numbers of cars are more than the place of parking. Radio Frequency Identification (RFID) Card Readers provide a low-cost solution to read passive RFID transponder tags up to 2 inches away. The RFID Card Readers can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics navigation, inventory tracking, payment systems, and car immobilization. The RFID card reader read the RFID tag in range and outputs unique identification code of the tag at baud rate of 9600. The data from RFID reader can be interfaced to be read by microcontroller or PC. This project is built on an 8051 micro controller; in this project each user is assigned an RFID card which holds a unique serial number. When a valid user with a card enters into the parking area of an apartment or office or a gated community, his card is authenticated and shows the available car parking slot next to the previous car, if the card is not authorized at that community, then a buzzer is activated to inform the security personnel. A motor is also interfaced to the system which opens the gates for authorized entries. An LCD is interfaced to the project to display the status of the system. The RFID reader is interfaced to the microcontroller by a serial communication interface. This project uses regulated 5V, 500mA & 12V, 500mA power supply. 7805 and 7812 three terminal voltage regulators are used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Led : 5mm Red LED Rfid Reader Max232 Software Requirements Keil Proteus Uc Flash Embedded C Prog Isp

• Brand Name: Soft Silicon
• RFID Tag Reader: RS232/RS485 Communication

we are offering rfid reader. rfid reader application is to register the student attendance when the student rdif card is swapped to the system, the swapped student record will be stored in school automation system then uploaded to the server on availability of gprs communication, at the server end the record will be validated and response will be returned to the school automation system to display the result and continue read for the next coming rfid card, in the event of the communication breakage or server failure the response will be displayed as “serverdown”. features of the system rfid card read. upload the record to the server through serial. record validated at the server. response posted back to the school automation system. response will be displayed on school automation system.

• Voltage: 9 - 16V
• Waterproof: Yes
• Use For: Tracking of goods

The company offers RFID Time Attendance System to maintain accuracy and security of data. The RFID Time Attendance System, we offer, is non-invasive and manages proper attendance. These RFID Time Attendance Systems are designed with unique barcodes, which are easily coded with our RFID Time Attendance Systems. We offer RFID Time Attendance System which facilitates complete privacy.

• Weight: 100-190 g
• Network Type: GSM, GPS

• Brand Name: STL

With immense experience and knowledge we are involved in offering a premium quality range of rfid readers. All these components are made using fine material and advanced technology by our trustworthy vendors to render maximum client satisfaction. These rfid readers are used to manage wireless communications in an effective manner. Additionally, we also assure safe and timely delivery of our rfid readers. features: high quality optimum performance low maintenance

We are offering RFID Smart Card System. Our RFID Smart card technology based products are used in many applications to automatically identify objects or people for attendanceaccessmembership and tagging goods for inventory control.

RFID Mifare Reader / Writer Module, Spot Billing System

Cable billing machine is used for monthly payment clollections ,spot billing ,send sms,print custmer statements,cutomers payment details...

EM18 RFID Reader Module, SPI-CAN V1.0 Protocol Converters

LF RFID Readers, Gps Modem With Antenna, Long range UHF RFID Reader

id card maker, id card materials, Membership Cards, PVC Cards

Rfid Smart Card, Biometric Identification System, Fingerprint Scanner

Cold Lamination Film, Custom Printed Lanyard, Button Badges, school badge