Rotocone Vacuum Dryer Dealers in Hyderabad

• Brand Name: DSEW
• Material: Stainless Steel
• Voltage: 440 V
• Country of Origin: Made in India
• Frequency: 50 Hz
• Automation Grade: Automatic
• Design: Customized
• Power Consumption: 15 HP
• Base Cylinder Diameter: Up To 3M

• CAPACITIES: 25 Ltrs - 2000 Ltrs.

Rotocone Vacuum Dryer (PBXRCVD) is suitable for drying of materials which cannot resist high temperature, material which are easily oxdised, volatile materials which should be retrived, materials which are strong irritants and poisonous in nature. PBXRCVD with the improved technology integrates during operation under vacuum. The RCVD facilitates enhanced drying efficiency, low temperature operations and economy of process by total solvent recovery. It helps cGMP based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers, cuts down drying time and gives a lump free product. ADVANTAGES: Reduces drying time Eliminates need for re-drying of lumps Handling and exposure of final product is avoided Gives uniformity size dry product System can process crystalline or amorphous powders which are prone for lumps Easy to clean internal surface, thus ensuring purity of product Optimum and continuous vacuum maintenance during process Uniform material shuffling over the heated contact surface of the cone SALIENT FEATURES/MOC (GMP Model) Inner shell/cone and contact parts in SS316 Heating (H.W./Stream) Jacket in SS304 Insulation with jacket in SS304 Cyclone seperator in SS304 Drive unit enclosed with SS Covers Dry mechanical seal for vacuum side Dry mechanical seal for waterside FLP motor and electricals Provision for nitrogen purging Digital temperature indicator (FLP) at hot water inlet and outlet Digital temperature indicator (FLP) Temperature and vacuum gauges (Dail type on cone) Safety guard with limit switch. Pulse jet type dust filter is provided inside the cone Butterfly valve at discharge Positioning wheel for cone Drive: Gear box and motor direct coupled and box to cone drive shaft chain drive/Hbull gear and pinion Construction and finish as per cGMP standards OPTIONALS: 2 Stage water ring vacuum pump Condenser and receiver in SS316 Digital temperature controller (FLP) with pneumatic valve at hot water inlet Vacuum pump (partial SS) with FLP motor Lump breakers on cone with FLP motor and dry mechanical seals

• Capacity: 15 kg

Accurate Rotocone Vacuum Dryer (RCVD) is suitable for drying of materials which cannot resist high temperature, material which are easily oxdised, volatile materials which should be retrived, materials which are strong irritants and poisonous in nature. RCVD with the improved technology integrates during operation under vacuum. The RCVD facilitates enhanced drying efficiency, low temperature operations and economy of process by total solvent recovery. It helps cGMP based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers, cuts down drying time and gives a lump free product.

is suitable for drying of materials which cannot resist high temperature, material which are easily oxidized, volatatile materials which should be retrieved, materials strong irritant and poisonous in nature. The roto cone dryer with improved technology integrates during operation under vacuum. The roto cone dryer facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. It helps cGMP based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers cuts down drying time and gives a lump free product.

• Brand Name: Ability Centrifuges
• Capacity: 2000 Liters
• Material: Stainless Steel
• Automation Grade: Semi-Automatic
• Heating Resource: Hot water/Oil
• Voltage: 240 V
• Type: CGMP
• Weight: 3500 Kg
• Power: 10 HP
• Country of Origin: Made in India
• Maximum Working Pressure: 2 KG
• Sensor Type: RTD
• Design: Standard
• I Deal In: New Only

• Capacity: 50-3000 L
• Automation Grade: Semi-Automatic
• Usage: Pharmaceutical ,Food , Chemical
• I Deal In: New Only
• Features: Less power consumption, Rust proof ,High strength
• Heat Exchange: Find tube heat exchangers and hot air generators
• Temprature: 30 to 80 Degree C

Suitable for drying of materials which cannot resist high temperature, materials which are easily oxidized, volatile materials which should be retrieved, materials strong irritant and poisonous matters. The rotocone dryer with improved technology integrates during operation under vacuum. The Rotocone dryer facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. It helps GMP based working by achieving optimum dust control, while offering the advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers, cuts down drying time and gives a lump free product.

Description: is suitable for drying of materials which cannot resist high temperature, material which are easily oxidized, volatatile materials which should be retrieved, materials strong irritant and poisonous in nature. The roto cone dryer with improved technology integrates during operation under vacuum. The roto cone dryer facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. It helps cGMP based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers cuts down drying time and gives a lump free product.   ADVANTAGES Reduces drying time Eliminates need for re-drying of lumps Handling and exposure of final product is avoided Gives uniformity size dry product System can process crystalline or amorphous powders which are prone for lumps Easy to clean internal surface, thus ensuring purity of product Optimum and continuous vacuum maintenance during process Uniform material shuffling over the heated contact surface of the cone. SALIENT FEATURES / MOC (in GMP Model) : Inner shell/Cone and contact parts in SS 316. Steam/HW water Jacket in SS 304. Insulation with jacket in SS 304. Cyclone separator in SS 316. Condenser (shell&tube) and Receiver in SS304 Butterfly valve (SS316) at discharge port with dummy and hand wheel. Stand and Structure in SS 304/MS with SS304 cladding. Drive unit enclosed with SS304 Covers Dry Mechanical Seal for vacuum side. Dry Mechanical Seal for Waterside. FLP Motor & FLP Control panel enclosed in SS304 panel Digital Temperature Indicators (FLP) at Hot Water inlet and outlet. Digital Temperature Indicator (FLP) and Dial Vacuum Gauge in vapor line. Digital Temperature Controller (FLP) with Pneumatic Valve at Hot water inlet. Provision for Nitrogen purging/Vacuum release with interlocking to isolation valve Temperature and Vacuum Gauges (Dial Type) on Cone. Safety Guard/railing telescopic type with limit switch (FLP) with interlocking. Drain plug and safety valve on HW/Steam Jacket. Pulse jet type dust filter is provided in side the cone. Positioning wheel /inching button for cone DRIVE : Gear Box & Motor Direct Coupled and Gear Box to Cone Drive shaft Bull Gear-Pinion Gear Drive. Extended shaft (drive side) so that drive unit can be kept in service zone (if required) Vacuum loading system of wet material into the Cone. FINISH : Internal 320 Grit Mirror Polish and Outer 180 Grit Mat Finish. OPTIONALS: Cantilever(One side base) construction. VFD for Drive Motor with RPM indicaor. Condenser and Receiver in SS316 instead of SS304. Lump breakers with FLP moter, Mechanical seals and electrical slipring joint. Auto Bin loading mechanisim with timer control and Bins. Vacuum pump with FLP moter. Hot water system (steam heated) with tank and circulation pump. TECHNICAL SPECIFICATION:

Rotocone vacuum dryer is a double conical vessel with an external jacket. During drying, the vessel rotates on its axis, resulting in the tumbling action of the product inside. This constant movement of the product increases the heat transfer between the heated surface and the product. Operated under vacuum, solvent recovery is carried out with a condenser and receiver. Crystalline and friable materials can be dried without size reduction.   SALIENT FEATURES Inner shell/cone and contact parts in SS316 Heating (H.W./Stream) Jacket in SS304 Insulation with jacket in SS304 Cyclone separator in SS304 Drive unit enclosed with SS Covers Dry mechanical seal for vacuum side Dry mechanical seal for waterside FLP motor and electricals Provision for nitrogen purging Digital temperature indicator (FLP) at hot water inlet and outlet Digital temperature indicator (FLP) Temperature and vacuum gauges (Dail type on cone) Safety guard with limit switch. Pulse jet type dust filter is provided inside the cone Butterfly valve at discharge Positioning wheel for cone Drive: Gear box and motor direct coupled and box to cone drive shaft chain drive/Hbull gear and pinion Construction and finish as per cGMP standards Finish - Internal 320 GritMirrorPolish and Outer 180 GritMatFinish. OPTIONAL   OPTIONAL VFD for Drive motor Condenser and receiver in SS316 Lump breakers on cone with FLP motor and dry mechanical seals  2 Stage water ring vacuum pump Vacuum pump (partial SS) with FLP motor.  

The Platinum Pharmatech Rotocone Vacuum Dryeris an Innovative, Integrated device addressing Mixing & Drying in a single enclosure. The key design goals being EASY TO CLEAN, 100% Discharge of Raw materials apart attaining high degree of Drying. Better shop floor aesthetics and easy to operate the device lowers significantly costs of operations, labor. The dryer can be used with equal efficacy across Chemical, and processed foods with great success.

• Weight: 100-200kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Warranty: 2years

the rota double cone vacuum dryer is suitable for drying the material which cannot operate at low temperature easily oxidized, poisonous in nature. The double cone rotating vacuum drying equipment is a new drier that integrates mixing and drying in the one body and equips with condenser and vacuum pump. Therefore the vacuum drier is formed. The drier is advanced in design, simple in inner structure, easy for cleaning, to discharge all raw material, convenient in operation and improving work environment. Meanwhile raw material is rotating accompanying with the rotating of container; raw materials cannot be accumulated onto the wall of container, so it has high efficiency heat transfer and high speed drying which save energy. Raw materials are dried uniformly and have good quality at low temperature. It can widely apply to dry raw materials of pharmaceuticals, chemical, pesticides, foodstuff , dyestuff and so on industries. The equipment is in conformity with the requirements of “gmp”. If the solvent does not recover, the condenser may be not used. material that cannot undertake high temperature. material that is easy to oxidize. material that do not permit to destruct. to recover material with residual volatile. material with vigorous irritative and toxicity the rota cone vacuum drier consists of a jacketed double conical shell rotating around 6 rpm with under the state of vacuum inside the shell, pass steam or hot water in to jacket for heating. The large heating surface area presented by the internals of the cone ensures uniform drying of the product, as the product gently tumbles while the cone rotates slowly. The vaporized steam can be pumped out through vacuum exhaust pipe when the damp raw material absorbed heat. The diffusive action induced by the tumbling cone constantly presents a fresh layer to come into contact with the indirectly heated walls of the shell, the dry speed of raw material is quickened and uniform drying efficiency is raised too. A well designed sealing system enable maintenance of deep vacuum inside the shell, and also ensures positive circulation of a heating media in the jacket. salient features : design is cgmp – current good manufacturing practices compliance all product contact parts aisi 316/ 316l & non contact parts aisi 304. automated mixing and drying process in single bowl. dust free operation. High vacuum operation. Low temperature drying. very low value of final moisture even at low drying temperatures. inside filter assembly with 5 micron.

Agitators, High Pressure Receiver, Spray Dryer, Tanks, vaccum traps

Rotocone Vacuum Filter Dryer, Rotary Vacuum Paddle Dryer, Laboratory Sifter

rotocone vaccum dryer, medical trays, Flooring Of Operation Theater

cnc water jet cutting services, cnc turret punching service

Low Temperature Oven, Hot Air Dryer, Chemical Dryer, Roto Cone Vacuum Oven

rotocone vaccum dryer, Pharmaceutical Machinery, machinery for bulk drug