Solar Charge Controller Dealers in Hyderabad

In order to ensure zero defects at buyer's end, we make sure that we conduct stringent quality procedures. Buyers across Hyderabad(India) and other markets can contact us for purchasing our product all year round.

Solar Hybrid Charge Controller (SHCC) is a MICRO CONTROLLER based Switch Mode Power Supply (SMPS) with SOLAR CHARGING facility for equipment which have to work on AC Mains and Battery. It has 1 (One) output which provides 10Amps to power the Equipment. For charging the Battery, SOLAR CHARGING is the primary charging source through Solar Panels. This eliminates the Mains Input AC for charging the battery and thus saves energy ensuring Dusk to Dawn operation.

We are offering solar charge controller manufacturer and supplier based in india. solar charge controller that we provide is known for its compact design and flawless functioning for charging and discharging. These controllers are made available at reasonable rates to suit the budget needs of all. model available nt- s c c - 05a features micro controller accuracybig terminals for easy terminationautomatic detection of the voltage offers protection against over charging or discharging over load short circuit reverse current (fuse10a)reverse polarity (r.p) display 3 led indicators p v : green - charging battery : red battery lowr.p : red reverse polarity protection.

Solar Hybrid Charge Controller (SHCC) is a MICRO CONTROLLER based Switch Mode Power Supply (SMPS) with SOLAR CHARGING facility for equipment which have to work on AC Mains and Battery. It has 1 (One) output which provides 10Amps to power the Equipment. For charging the Battery, SOLAR CHARGING is the primary charging source through Solar Panels. This eliminates the Mains Input AC for charging the battery and thus saves energy ensuring Dusk to Dawn operation.

Solar home system is a stand-alone solar power system, used for electrification in remote areas where the utility grid is not available. This system consists of charge controller and inverter in the same enclosure. The charge controller controls charging current from solar array to storage battery and the inverter converts DC from battery to AC to supply to AC appliances. The built-in MPPT (Maximum Power Point Tracking) functions to help maximize the power generated by PV array.  

• Capacity: 4000-5000(mAh)
• Connector Size: USB
• Battery Type: Li-Polymer Battery

• Voltage: 12 to 24V
• Output Voltage: 5VDC,1Amp,2 Amp
• Capacity: 10000 mAh
• Material: PP
• USB Port: 4
• Usage: For Phone Charge
• Brand: Waaree
• Input Power: 5VDC,1Amp
• With LED: Yes

• Voltage: 12 V (Battery Voltage)
• Power: 60 W Max. (PoE Output Power)
• Battery Charge Current Maximum: 20 Ampere
• Input Solar Panel Range: 15 V to 220 V DC
• Network Cabling: Cat 5/6 or Higher

SPECIFICATIONS FOR ULTRA SUN SAVER SOLAR CHARGE CONTROLLER WITH TIMER UE-SPV-MCT-02 Ultron’s Ultra Sun Saver is the Inida’s leading small solar charge controller for both professional and consumer applications. Ultra sun saver’s technology provides;  Exceptional Reliability  PWM Battery Charging  Consistent High Quality The Ultra sun saver’s advanced design delivers outstanding performance and value. The Ultra Sun saver’s low cost made possible by Ultron’s unique approach to design and manufacturing. â€Â¢ ISO 9001:2008 quality programs â€Â¢ Latest Power electronic technology â€Â¢ Latest control and logic technology â€Â¢ High volume manufacturing Features: 12V and 24V, 6,10 and 20Amps 100% solid state Series design (not shunt) True 0 to 100% PWM duty cycle Set point accuracy to 35mV Rated for 25% over loads No need to derate Parallel for 40A or more Micro processing controller pulse modulation wide – Frequency PWM Charge Protective circuit of PV from reverse charging Over loading protection Over charge protection Short circuit protection Temperature compensation Applying with various types of durable batteries Real timer for load ON & OFF at required time within 24 hrs. TECHNICAL SPECIFICATIONS: a) Nominal Voltage : 12V or 24V DC b) Max. Charging current : 5A or 10A c) Deep Discharge protection : 10.5V/21.0V d) Over Charge Protection : 14.4V/28.8V e) Restart Of Charging : 12.5V/25V f) Reconnection of Load : 12.5V/25V g) Output load current : 5A or 10A Max. h) Battery AH Rating : 50AH or 100AH Max. i) Solar Panel : 120Watts Max. j) Operating Temp. : 500 C k) Self Consumption : 10ma

Solar Mobile Charger, which we offer, is manufactured in compliance with the set industrial standards. We offer this Solar Mobile Charger at the market leading rates. These Solar Mobile Chargers are appreciated for their sleek and compact design. We are rated among the trusted Manufacturers and Suppliers of the Solar Mobile Charger.Why Our Solar Mobile Charger? Handy Solar charger for any mobile phone Portable and sleek Can be used in day or night Can be re-charged with Sun light, electricity or computer USB Can fully charge a mobile in 1-2 Hours

We are offering solar charge controller for inverter-pwm based. the solar charge controller is used with battery backup systems. The charge controller is an electronic voltage regulator that is used to limit the rate at which electric current is drawn in or out of the batteries. Pwm based charging control fully charges the battery without permitting overcharge while preventing from reverse current flow. The overcharge or overvoltage may reduce the battery performance or lifespan and may pose a safety risk. Two led’s are providing for indicating solar charge availability and solar charging indication. On board grid availability detector along with led indicator. It has a grid connectivity relay with built in fuse and 3 pin grid socket on board. The basic battery capacity of pwm charge controller is 150 amp hours and it can support a maximum load up to 30a. The efficiency of the product is 98%. The simplest charge controllers turn off the charge when the battery reaches the optimum charging point and turns on when it goes below certain level specifications of 12/24v 20a pwm system voltage : 12v/24v maximum charging current : 20a maximum peak efficiency of electronics : 97% suitable inverter/ups rating : 800va or 1kva (12v) 1400kva (24v) solar panels required : 240 w / 480 w grid supply : 230v ac maximum battery voltage : 14.4v dc (12v) 28.8v dc (24v) photovoltaic panel voltage ratings : 12v nominal (17-21v open circuit voltage) 24v nominal (36-42v open circuit voltage) battery over charge protection : yes.

We are instrumental in supplying Solar Charge Controller that is widely acclaimed among the clients for its superior performance and robust construction. These Solar Charge Controllers are integrated with latest features thus ensure breakthrough performance. Moreover, this Solar Charge Controller includes important features and also ensures overload/short circuit protection of batteries by MCB. Specifications : Capacity : 3 KW/5KW/24V/48V/120V/240VOperating ambient up to 520C Features : Easy installation/dismantlingPowder coated -corrosion proof sheet steel boxBuilt-in battery reverse current blocking diodeBuilt-in MCB for battery short circuit protectionSelector switch for automatic or manual operationHigher voltage charging option for equalizing charge (in manual mode)Status monitoring of battery low & battery high annunciation LCD display on front panelWall or base mountable arrangementLighting surge protective devicesFront mounted input/output terminal for easy accessibility, faster replacement of module and less down time Suitable For : Standalone Multiple parallel module

• Application: Solar System Controller
• Voltage: 12/24 V
• Charge Controller Type: Solar
• Brand Name: Numax
• Working Temperature: -20 to +55 degree C
• Indication Light: Red-Empty, Yellow - Alert and Green - Full
• Model Number/Name: Solar SCF 1010
• Current Range: 10 A
• Phase: Single phase
• Load Type: AC

• Feature: Less maintenance, Long lasting , Cost effective.

Our Power Saver is an integrated system that is equipped with microcontroller based regulator to monitor voltage, current, power factor and, current threshold. It introduces low-loss impedance path between the source and the load that causes maximum power transfer in the path results in substantial power saving of power consumption up to 30%.

We can supply solar charge controllers ranges from 5a - 40a.

• orange: white

We are offering solar charge controller. About this product high quality 10 amp solar charge controller for 12 v solar system high voltage protection by dual fuse simple to install solar charge controller has mainly three basic functions 1) to limit the voltage from the solar panel and regulate the same so as not to overcharge the battery 2) not to allow the battery to get into deep discharge mode while dc loads are used 3) to allow different dc loads to be used and supply appropriate voltage a charge controller limits the rate at which electric current is added to or drawn from electric batteries. It prevents overcharging and may prevent against overvoltage, which can reduce battery performance or lifespan, and may pose a safety risk. It may also prevent completely draining ("deep discharging") a battery, or perform controlled discharges, depending on the battery technology, to protect battery life. A solar charge controller is needed in virtually all solar power systems that utilise batteries. The job of the solar charge controller is to regulate the power going from the solar panels to the batteries. Overcharging batteries will at the least significantly reduce battery life and at worst damage the batteries to the point that they are unusable.

Solar Charge Controller, Solar Water Heater, Solar Management Unit

Solar Chargers, Solar Lanterns, Solar Products, Solar Panel, Solar Lantern

Product Description The UMBER intelligent solar priority MPPT charge controller increases solar charging efficiency, reduces power costs and does not impact battery life negatively. Features : Maximum power point tracking (MPPT) is a technique that devices such as solar battery chargers use to get the maximum possible power from solar panels. Solar cells have a complex relationship between solar irradiation, temperature and total resistance that produces a non-linear output efficiency which can be analysed based on the I-V curve. It is the purpose of the MPPT system to sample the output of the cells and apply the proper resistance (load) to obtain maximum power for any given environmental conditions. MPPT maximizes the power harvested from the solar panels – efficiency improvement of 15-20% compared to PWM based conventional chargers Applications : The UMBER intelligent solar priority MPPT charge controller can be retrofitted with existing systems or can be used as part of a new system

we are offering Solar Hybrid Charge Controller. Solar hybrid charge controller (shcc) is a micro controller based switch mode power supply (smps) with solar charging facility for equipment which have to work on ac mains and battery.

Solar Battery Charger, Solar Photovoltaic Panels, Solar Light Fixtures

Solar charge controller is designed to maximize energy harvest from the PV array (Photovoltaic cell array). It incorporates dynamic MPPT (Maximum Power Point Tracking) algorithm. The MPPT constantly adjusts the operating points of the array that ensures the delivery of maximum available power from PV array to battery bank.

Solar Battery Charger, Solar Photovoltaic System, Solar PV Cells

Solar Chargers, Solar Fans, Solar Inverters, Solar Pump Controllers

Solar Charge Controllers, Solar Products Solar Inverters, Solar UPS

Solar Charge Controller, Solar Home Light System, Solar Lamp, Solar Lantern

Solar Charge Controllers, Solar Photovoltaic Modules, Solar Battery

Solar Charge Controller, Microcontroller Circuits, Solar Controller