Back Back
Urethane Caster
400 Per Piece
Material : Polyurethane
Printing Rollers
6,500 Per Piece
Roller Surface : Polyurethane
Size : VARIES
Country of Origin : Made in India
...more
Printing Roller
Country of Origin : Made in India
Roller Work Nature : Wetting With Rubber
Roller Material : Stainless Steel
Roller Surface : Polyurethane
Hardness : 65 Shore D
Roller Length : 6 Meter
Roller Diameter : 50 mm
...more
Polyurethane Wheels
Country of Origin : Made in India
Color : Red
Diameter : 100 Mm
Load Capacity : < 100 kg
Wheel Bearing : Roller
Hole Centre : 92 x 75 mm
Width : 50 mm
Swivel Radius : 31 mm
Over All Height : 141 mm
Top Plate : 115 x 100 mm
Plate Hole : 10.5 mm
...more
polyurethane panels
Material : POLYURETHANE
Size : 610mm*300mm
Brand Name : ORITHANE
Country of Origin : Made in India
...more
Polyurethane Mat
Material : POLURETHANE
Color : ORITHANE
Country of Origin : Country of Origin
...more
Polyurethane Castors
Features : low wear and tear., High load bearing capacity., Low rolling resistance., Non-marking.
Brand Name : ORITHANE
Material : POLYURETHANE
Country of Origin : Made in India
...more
Pallet rollers
Country of Origin : Made in India
Brand Name : ORITHANE
Nylon Caster Wheels
Country of Origin : Made in India
Material : NYLON
Conveyor Roller
Country of Origin : Made in India
Color : Red
Roller Material : Stainless Steel
Roller Surface : Polyurethane
Roller Length : >500 mm
...more
Conveyor Polyurethane Roller
Country of Origin : Made in India
Color : Black
Roller Work Nature : Inking Roller
Roller Material : Stainless Steel
Roller Surface : Polyurethane
Brand Name : Orithane
Model Number : ORI-SS
Hardness : 60 Shore D
...more
Boat Roller
Color : Multi Color
Application : Industrial
Brand Name : Swagath
Size : 20 shore A to 85 shore D
Length : 6 m
Diameter : 2 m
...more
Urethane rollers
Color : Multicolor
Hydrocyclone
A hydrocyclone is a device to classify/separate or sort particles in a liquid suspension based on the densities of the particles. A hydrocyclone may be used to separate solids from liquids or to separate liquids of different density.A hydrocyclone will normally have a cylindrical section at the top where liquid is being fed , and a base. The angle, and hence length of the conical section, plays a role in determining operating characteristics. A hydrocyclone has two exits on the axis: the smaller on the bottom (underflow or reject) and a larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction.Internally, centrifugal force is countered by the resistance of the liquid, with the effect that larger or denser particles are transported to the wall for eventual exit at the reject side with a limited amount of liquid, whilst the finer, or less dense particles, remain in the liquid and exit at the overflow side through a tube extending slightly into the body of the cyclone at the center.Forward hydrocyclones remove particles that are denser than the surrounding fluid, while reverse hydrocyclones remove particles that are less dense than the surrounding fluid. In a reverse hydrocyclone the overflow is at the apex and the underflow at the base. There are also parallel flowhydrocyclones where both the accept and reject are removed at the apex. Parallel-flowhydrocyclones remove particles that are lighter than the surround fluid. Orithane cyclone distributors Require 3 connections i.e. feed, overflow discharge and underflow discharge. Compact design to reduce floor area requirement while providing sufficient room for access and maintenance. Isolation valves provided at shoulder height with sufficient access for easy operation. Underflow land\launder installed at floor level for visual inspection of spigot discharge and easy access for maintenance. Feed distributor Radial or in-line to ensure equal solids and liquid distribution to each cyclone for equal cyclone performance. 2 to 62 outlets available. All internal surface lined with an abrasion resistant wear liner. Replaceable sole polyurethane wear pad to protect wear liner and increase operating life. Supplied with pressure gauge to monitor cyclone operation. Cyclones Designed to accommodate cyclones from 40mm to 900mm. isolation valves provided to enablecyclones to be isolated for maintenance or operational reasons. Overflow tank/lauder Individual cyclone overflow discharge into a common overflow. Overflow tank is lined with a suitable abrasion resistant liner. An outlet of sufficient diameter is provided to enable maximum slurry flow rate to discharge under gravity. A removable splash cover is provided to minimize splashing/spray. Underflow tank/launder Individual cyclone spigots discharge into a common underflow launder. Underflow tank is lined with a suitable abrasion resistant liner i.e. urethane. Natural rubber or ceramics. A large outlet is provided and the base is angled between 10 and 45 degrees to ensure the dense spigot product can discharge under gravity. A removable splash cover can be provide to minimize any spray/splashing present. The unique scrolled evolute inlet design. The heart of the orithane dense medium cyclone. Through extensive testing and simulations. Orithane process equipment has proven that the scrolled evolute inlet design has a higher capacity when compared to other inlet designs. The scrolled evaluate inlet design substantially reduces vortex finder wear, reducing operating costs and maintaining cyclone efficiency. Material of construction Cyclones are available in a wide range of materials depending on cyclone diameter, top size and material being treated. Available materials are: PolyurethaneA special abrasion resistant polyurethane which under certain conditions can give three times more life than rubber.Cast ironA 27% high chrome cast iron which provides excellent abrasion resistance for most applications. Silicon carbideLiners manufactured from nitride bonded silicon carbide which provides superior abrasion resistance for softer and smaller particle applications. AluminaEngineered alumina tiles with 94% alumina which is suited to coarse particle high wearing applications. Hybrid alumina and cast iron Used in alumina lined cyclones where tramp metal is present. The cone sections are supplied in high chrome cast iron which is better suited to handling tramp metal. High-efficiency inlet designsThe heart of the orithane cyclone range.Through extension testing and simulations. Orithane process equipments has proven that both the scrolled evolute and ribbon inlet designs have a higher capacity when compared to other inlet designs. These designs substantially reduce vortex finder wear, thereby reducing operating costs whilst maximizing cyclone efficiency. General features: Lightweight overflow elbow Overflow elbows are made from an abrasion-resistant polymer. That is lightweight, Requires no corrosion protection and is cost-effective a rubber/urethane sleeve is fitted to reduce wear at the vortex finder discharge. Vortex findersThe scrolled evolute and ribbon inlet designs reduce vortex finder wear to the degree that polyurethane or rubber lined vortex finders can be used cost-effectively. Loose linersAll wetter surface are lined with 15 or 25mm thick loose replaceable rubber liners. Which have up to three times more life than conventional liners. This reduces operating costs. Maintenance and stock holdings, alternative liners. Such as polyurethane and silicon carbides, are available. For extremely abrasive applications housings lined with 25mm alumina tiles can be supplied Weep holes prevent damage to housingsOuter housings are fitted with weep holes located in the highest wear areas. Slurry dripping from the weep holes gives an early indication that the liner needs replacing. Preventing housing wear.HC and HR cyclones incorporate mild steel shell housings. While PC cyclones incorporate lightweight. Rust-resistant, fibre-reinforced composite housings. SpigotThe spigot is housed in a light weight holder. The design of which enables easy inspection or replacement of the spigot. Inserts are available in polyurethane or silicon carbide. Cyclone distributorsWe offer distributors for larger, multiple cyclone operations. These assembles have been designed to ensure optimum cyclone operation and are extremely compact
...more
Polyurethane Wheel
wheels are made of a thin coating of polyurethane of any hardness, bonded to metal hubs. Typical applications of wheel. =>for detailed specifications on wheels click below : 1.urethane wheels 2.heavy duty wheels 3.grooved wheels 4.stacker wheels 5.flanged wheels =>for more details visit www.puwheels.info =>for detailed specifications on wheels click below :1.urethane wheels2.heavy duty wheels3.grooved wheels4.stacker wheels5.flanged wheels =>for more details visit www.polyurethanewheels.com =>for detailed specifications on wheels click below :1.urethane wheels2.heavy duty wheels3.grooved wheels4.stacker wheels5.flanged wheels =>for more details visit www.urethanewheels.com castors and wheels: at swagath company the latest technology is used for polyurethane covering of various. rollers up to 6m in length and 2m in diameter.this method is called rotational casting or ribbon flow moulding. Production of covered rollers at the minimum time with best surface quality are possible.these rollers with various dimensions and different kinds of flat ribbed are used in all industries such as steel, iron, aluminum, wood and textile. applications: pallet trucks. stackers. manipulators. fork lift tyres. fricition wheels. roller skate wheels. wagon wheels. rotators. small bearings. features: low wear and tear. high load bearing capacity. low rolling resistance. non-marking. resistant to oil, grease & chemicals. wide temperature stability(-40c to 80c) strong bonding with various insert materials. typically, wheels are made of a thin coating of polyurethane of any hardness, bonded to metal hubs. Typical applications of wheels are used for escalators and elevators.
...more
Polyurethane PIG
Cleaning PigsCleaning Pig Standard with polyurethane cups. Standard with spring loaded stell 'Z' brushes.Available with stainlessor prostran brushes. Also available with polyurethane blads. Specify discs for bidirectional operation. Pig transmitter mounting option. Mandrel PigsMandrel Pigs are available in cup and disc designs for pig sizes to 56 inches. Designs are available for applicatons such asGaugingMaximum SealingCleaning, BrushingTrackingMulti diameter Pipe SizesHigh Differential SealingHigh BypassSWAGATH URETHANE PVT LTd. Specializes in Mandrel Pig designs cleaning of deposits such as waxes and scale, Pig cleaning, Sealing ability and other special application. Foam PigsSize range 2 to 60The foam pig tabulation details standard sizes. Other sizes can be quickly fabricated. Towing rop, transmitter housing, special materialsProduct separation and line dryingTraverses ball, gate or check valvesTraverses full diameter 90° barred teesEasily negotiates most partial obstructionsSpecially designed for directional operation with thick ployurethane disc at each endEasily pases throught grreatly reduced pipe diametersStandard foam manufactured from 24/32Kg/m density. Vantage PigsAvailable in sizes 2 through 14 (50 - 350mm), the Vantage is lightweight and easy to assembe and maintain. The one piece, molded may design may be equipped with 2 cups or 4 cups and disc to insure longer life. The pig is flexible enougth to trraverse 20 percent reductions in the pipe due to buckles, dents or flattening. Cups & Discs Cleaning Pig Standard with polyurethane cups.* Standard with spring-loaded steel "Z" brushes. Available with stainless or prostran brushes. Also available with polyurethane blades. Specify discs for bidirectional operation. Pig transmitter mounting optional.
...more
Polyurethane Screen
mining applications tension polyurethane screens hook type panels which directly replace wire cloth on standard crown decks. Available in 90 duro "a" urethane material, "ah" material, and 60 duro "d" material. "a" material "bd" material flex "d" material injection molded segments flex-a-thon mater tensioned screen benefits blanked out and reinforced over support bar area impact area may be blanked out and reinforced reinforcement designed to maintain tension perfect seals between screens screen openings are of tapered design =>for detailed specifications on screens click below : 1. Tensioned polyurethane screens 2. Flipflow screens 3. Polyurethane trommel screens 4. Polyurethane wated steal wire screens =>for more details visit www.polyurethanescreens.com =>for detailed specifications on screens click below : 1. Tensioned polyurethane screens 2. Flipflow screens 3. Polyurethane trommel screens 4. Polyurethane wated steal wire screens =>for more details visit www.puscreens.com =>for detailed specifications on screens click below : 1. Tensioned polyurethane screens 2. Flipflow screens 3. Polyurethane trommel screens 4. Polyurethane wated steal wire screens =>for more details visit www.urethanescreens.com product range: panel size :610mm*300mm (24”*11 13/16”) 305mm*305mm (12”*12”) aperture size :(1/70”*31/8”) applications: steel plants mining industry cement plants mineral beneficiation plants power plants coal washeri’s orithane screen mats are without steel reinforcement.aperture are moulded or punched as per the application.available with fabric reinforcement. Used for screening of fines and materials with high moisture content.thickness varies from 3mm to 6mm.
...more
Polyurethane Roller
AT SWAGATH latest technology is used for polyurethane covering of various rollers up to 6m in length and 2m in diameter. this method is called rotational casting or ribbon flow molding, production of covered rollers at the minimum time with best surface quality are possible. these rollers with various dimensions and different kinds of flat ribbed are used in all industries such as steel, iron, aluminum, wood and textile. POLY-PRO Slip-On Roll Covers are made of durable Polyurethane materials in several durometers. They are designed to fit on the O.D. of standard size Conveyor rollers, providing a cushioned, wear resistant, quieter system. They protect the products from damages. They are non-marking. Standard hardness's are 95A orange, 85A White (FDA), 60A yellow, 40A Green. These compounds are Castable type polyurethane, and are more durable than other types of Extruded Polyurethanes. Installation of these rollers is very simple. The I.D of these tubes are made to be slightly smaller than the O.D. of the metal Rollers, so as to provide a press-fit. By lubricating the O.D. of the rollers with a water soluble oil or a soap solution, these tubes are pushed on to the rollers from one end. A Special installation tool is available, that will fit on one end of the tube with a hose clamp, and by blowing air on this end, the tube will enlarge in size to make it easy to slide the tube along the length of the roller. For using this tool, the sleeves are to be 2" longer than the roller, and one end is trimmed with a razor after installation. Rollers and wheels: At swagath company the latest technology is used for polyurethane covering of various. Rollers up to 6m in length and 2m in diameter.This method is called rotational casting or ribbon flow moulding. Production of covered rollers at the minimum time with best surface quality are possible.These rollers with various dimensions and different kinds of flat ribbed are used in all industries such as steel, iron, aluminum, wood and textile. =>For Detailed Specifications on rollers Click Below : 1. Concave rollers 2. Converting rollers 3. Convex rollers 4. Conveyor rollers 5. Drive rollers 6. Feed rollers 7.Folding rollers 8. Friction rollers 9. Idler rollers 10. Index rollers 11. Inserting rollers 12. Laminating rollers 13. Load rollers 14. Material handling rollers 15. Nip rollers 16. Packaging rollers 17. Pinch rollers 18. Pull rollers 19. Sealing rollers 20. Sortation rollers 21. Track rollers 22. Transfer rollers 23. V-groove rollers 24. Web handling rollers =>For more details visit www.polyurethanerollers.info =>For Detailed Specifications on rollers Click Below : 1. Concave rollers 2. Converting rollers 3. Convex rollers 4. Conveyor rollers 5. Drive rollers 6. Feed rollers 7.Folding rollers 8. Friction rollers 9. Idler rollers 10. Index rollers 11. Inserting rollers 12. Laminating rollers 13. Load rollers 14. Material handling rollers 15. Nip rollers 16. Packaging rollers 17. Pinch rollers 18. Pull rollers =>For more details visit www.purollers.com Applications: Pallet trucks. Stackers. Manipulators. Fork lift tyres. Fricition wheels. Roller skate wheels. Wagon wheels. Rotators. Small bearings. Features: low wear and tear. High load bearing capacity. Low rolling resistance. Non-marking. Resistant to oil, grease & chemicals. Wide temperature stability(-40c to 80c) Strong bonding with various insert materials. Typically, wheels are made of a thin coating of polyurethane of any hardness, bonded to metal hubs. Typical applications of wheels are used for escalators and elevators.
...more
Polyurethane Mallet
The safe, silent and cost-effective choice for a wide range of operations and environments. Superior design steel structure fully covered with Polyurethane. OUTSTANDING FEATURES: Safe: Protects workmen from injuries Silent: Low noise level makes for a more conducive work environment Non-rebound: Special mallet head design for greater impact without renounces Scratch-proof: Dent free & scratch free working protects work piece Spark Freedom: No spark due to Polyurethane covering Cost-effective: Longer life span & hence cost-effective =>For Detailed Specifications on Mallets Click Below : =>Poly Urethane Mallets =>For more details visit www.polyurethanemallets.com =>For Detailed Specifications on Mallets Click Below : =>Urethane Mallets =>For more details visit www.urethanemallets.com Features: Wide resilience rang. Highly resistant to impact. High load bearing capacity. Excellent abrasion resistance. Superior flex fatigue resistance. Resistant to oil, grease and lubricant. non rebound. Scratch proof. Spark freedom. Safe to use. Low noise. Applications: stripper bushes for moulds & dies. Press break pad Metal forming dies. Shock absorbers. Wear & cutting pads. Die & mould making. Automobile industries. Electronic industries. Aluminum frame industries. Aircraft industries.
...more
Polyurethane Coating
The applications and uses for are as endless as your imagination. We have a wide selection of specialised products for the most demanding applications. We are constantly finding new opportunities in every sector of trade and industry including, transport, commercial, industrial, marine etc. TRANSPORTTrucks, Vans, Trailers, Tippers, Refrigerated Vehicles, Display Vehicles, Animal Transporters, Street Sweepers, Snowploughs, Gritters, Kerbside Collection Vehicles, Tankers, Chemical Trucks, Pest Control Vehicles, Dog Vans, Water Trucks, Horse Boxes, Fifth Wheel Vehicles, Bus Floors/Steps, Rental/Lease Fleets, Chemical Transport Vehicles, Heavy Plant Carriers, Prisoner / Arrested Persons Custody Vehicles, Agricultural Feed Transport. INDUSTRIALRoofing, Containment Areas, Flooring, Plant Rooms, Decking, Freezer Floors, Hoppers, Grain Elevators, Brewery and Winery Flooring / bunded areas, Storm Damage Repair, Inspection Pits, Wet Rooms, Food Preparation Areas, Cafeteria Floors, Silos, Underground Tanks, Waste Water Containment, Chemical Bunding, Walkways, Heavy Equipment/Machinery, Storage Areas, Basements, Workshops, Gangways, Platforms, Antimicrobial Flooring and Surfaces. COMMERCIALWet Rooms, Ponds, Water Fountains, Dog Kennels, Milking Parlours, Animal Enclosures, Wildlife Tanks/Pools, Workbenches, Countertops, Wheelchair Ramps, Non Slip Walkways, Beer Cellars, Rust/Corrosion Prevention, Mobile Homes, Porta-Cabins, Walk in Refrigerators / Storerooms, Antimicrobial Flooring and Surfaces. MARINEBoat Roofs, Boat Decking, Cargo Holds, Loading Ramps, Buoys, Divers Rise Points, Canal Barges, Engine Housing, Water Storage Areas, Docks, Boat Trailers, Interior Hull Insulation, Canoe Repairs, External Hull Protection / Repair, Jetties, Ramps and Anti-Slip Areas. DOMESTICBalcony, Floors, Patio Coating, Garage Floors, Flat Roofs, Pantries, Porches and Porch Roofs, Workshops, Cellars and Basements, General Bunding (Oil Tanks), Flood Damage Protection and Repair, Outside Steps and Decking (Anti-Slip), Shed Roofs, Kennels etc, Animal Shelters and Stables, Gates, Fencing, Ponds, Swimming Pool and Hot Tub (inc repairs), Patios and Verandas. RECREATIONALSwimming Pools, Hot Tubs, Beach Hut Protection, Flood Defences, Ponds, Theme Park and Fun Fair walkways and queuing areas, Zoo Enclosures, Fish / Animal Tanks, Theatre Staging / Boards, Dance Floors, Film / TV Sets / Studios and Props, Caravan Repairs / Waterproofing, Stable Flooring and Wall Covering. (All can be applied with the Ultimate Linings Anti Microbial Additive) Anti- Microbial Coatings (Available in any colour).
...more
Polyurethane Tubes
we manufactures urethene tubes in different sizes as per your requirement. RODS AND TUBES: Features: Wide resilience rang. Highly resistant to impact. High load bearing capacity. Excellent abrasion resistance. Superior flex fatigue resistance. Resistant to oil, grease and lubricant. non rebound. Scratch proof. Spark freedom. Safe to use. Low noise. Applications: stripper bushes for moulds & dies. Press break pad Metal forming dies. Shock absorbers. Wear & cutting pads. Die & mould making. Automobile industries. Electronic industries. Aluminum frame industries. Aircraft industries.
...more
Polyurethane Custom Moulding
The applications and uses for are as endless as your imagination. We have a wide selection of specialised products for the most demanding applications. We are constantly finding new opportunities in every sector of trade and industry including, transport, commercial, industrial, marine etc. The versatility of open-cast urethane and polyurethane molding produces a wide variety of products for most industries. Applications requiring high abrasion resistance, outstanding tensile and tear strength, noise dampening, chemical resistance, and/or excellent load bearing capability, find that urethane surpasses most other polymers.Expensive metal casting often times can be replaced by lightweight urethane and still maintain or exceed wear characteristics found in their metal counterparts. =>For Detailed Specifications on Custom Moulding Click Below : 1. Urethane Dunnage 2. Muller Liners 3. Urethane Seals 4. Urethane Gears 5. Urethane Capper Disks 6. Check Valve Ball 7. Urethane Classifier Shoes 8. Custom Urethane Molding 9. Colors of Urethane 10. Urethane Molding 11. Silicone Molding 12. Thermoforming / Vacuum Forming 13. Complete Machine Shop 14. Industries / Markets Applications =>For more details visit www.pucustommoulding.com =>For Detailed Specifications on Custom Moulding Click Below : 1. Urethane Dunnage 2. Muller Liners 3. Urethane Seals 4. Urethane Gears 5. Urethane Capper Disks 6. Check Valve Ball 7. Urethane Classifier Shoes 8. Custom Urethane Molding 9. Colors of Urethane 10. Urethane Molding 11. Silicone Molding 12. Thermoforming / Vacuum Forming 13. Complete Machine Shop 14. Industries / Markets Applications =>For more details visit www.urethanecustommoulding.com =>For Detailed Specifications on Custom Moulding Click Below : 1. Urethane Dunnage 2. Muller Liners 3. Urethane Seals 4. Urethane Gears 5. Urethane Capper Disks 6. Check Valve Ball 7. Urethane Classifier Shoes 8. Custom Urethane Molding 9. Colors of Urethane 10. Urethane Molding 11. Silicone Molding 12. Thermoforming / Vacuum Forming 13. Complete Machine Shop 14. Industries / Markets Applications =>For more details visit www.polyurethanecustommoulding.com Polyurethanes can be selected and formulated to maximize particular need specifications such as maximizing abrasion or increasing tensile strength to obtain the strongest, most break resistant part possible. The ingredients found in some urethanes are FDA approved for contact with foodstuffs and find applications in food services and production as well as the medical industry.
...more
polyurethane lining
OUTSTANDING FEATURES: High Abrasion Resistance Suitability to Different Finishing Media, Oils. Custom-made as per requirements.Preferred by leading Indian OEMs of finishing equipment. OUTSTANDING FEATURES: High Abrasion Resistance Suitability to Different Finishing Media. guaranteed bonding with metal surface. custom-made shapes such as spiral,radial and corrugated surface profiles. available in different shore hardness as per customers requirements. preferred by leading indian OEMs of finishing equipments. =>For Detailed Specifications on Liners Click Below : 1. Urethane Liners 2. Custom Liners 3. Polyurethane Custom Lining Services 4. Polyurethane Liner 5. Urethane Lining 6. Polyurethane Lining 7. Chute Liners 8. Ceramic Liner 9. Polyurethane Linings & Liners 10. Polyurethane Linings 11. Poly Liners 12. HDPE Liners 13. Polyurethane Liners =>For more details visit www.polyurethaneliners.com =>For Detailed Specifications on Liners Click Below : 1. Urethane Liners 2. Custom Liners 3. Polyurethane Custom Lining Services 4. Polyurethane Liner 5. Urethane Lining 6. Polyurethane Lining 7. Chute Liners 8. Ceramic Liner 9. Polyurethane Linings & Liners 10. Polyurethane Linings 11. Poly Liners 12. HDPE Liners 13. Polyurethane Liners =>For more details visit www.puliners.com TYPICAL APPLICATIONS: Vibrofinishing Bowls, Barrels & Drums Centrifugal Finishing Machine. Ball Mills linings. Pipe Linings Chute Linings & hopper linings. pump liners & impellers
...more
Polyurethane Flip Flop Screen Mat
Flip flop or flip flow screening machines have been in operation for decades for screening of moist or humid materials. Some typical applications Iron Ore at 6mm with 15% moisture · Raw sand at 3mm with 6% moisture · Compost at 10mm with 50% moisture · Slag at 3mm with 10% moisture · Salt at 3 mm with 5 % moisture · Coke at 3mm with 20% moisture · Lignite at 6mm with 50% moisture · Coal at 6mm with 18% moisture · Limestone at 3mm with 20% moisture · Pet coke at 3mm with 18% moisture · Plus other hard to screen materials like wood chips, bamboo chips, washery waste, building rubble, soil, plastic, auto parts etc. Principle of Operation : Generally referred to as “flip flow” or “ flip flop” screening method. During the cycling of screener, the flexible mats are individually tensioned and relaxed, which breaks or loosens the adhesive bond within the materials, and between the material and flip flow screen mats. In the upstroke, the material is impelled upward functioning like a trampoline and air is drawn in and through the material. The motion is such that the acceleration on machine support frame could be approx 3g whereas the material on the screen panels may experience around 50g. During these stretch & relax moments, the openings or aperture in the screen mats get elongated , stretched or bend which tremendously helps in release of particles which might have got jammed.
...more
Polyurethane Custom Moulding Service
The applications and uses for are as endless as your imagination. We have a wide selection of specialised products for the most demanding applications. We are constantly finding new opportunities in every sector of trade and industry including, transport, commercial, industrial, marine etc. The versatility of open-cast urethane and polyurethane molding produces a wide variety of products for most industries. Applications requiring high abrasion resistance, outstanding tensile and tear strength, noise dampening, chemical resistance, and/or excellent load bearing capability, find that urethane surpasses most other polymers.Expensive metal casting often times can be replaced by lightweight urethane and still maintain or exceed wear characteristics found in their metal counterparts.
...more
Reviews & Ratings
Write a ReviewBe first to Rate
Rate This
Share your Correspondence Details to receive messages from Swagath Urethane Private Limited
Post Free Ad