Synchronization Panels / Synchronized Control Panels Dealers in Hyderabad

Synchronizing Panels are mainly designed and used to meet power system requirements. These Automatic Synchronizing Panels provide manual as well as automatic synchronizing function for one or more generator breakers. They are widely used in synchronizing generators and offering multiplexing solutions. Moreover, we are looked upon as one of the eminent Power Synchronizing Panels Manufacturers in India. Synchronizing panels usually consist of A Generator Control Unit : This unit automatically matches generator frequency and voltage levels with that of the bus. A Syncrocloser Unit : It sends the closing command to the breaker at the exact moment of phase coincident. A Syncrocloser Check Relay : It performs the progressive function of verifying voltage and phase angle conditions and ensuring that they are within preset limits, before allowing the breaker to close. The device is provided with control switches in the front panel. These switches are responsible for manual raising and lowering of speed and voltage of the generator to match the bus frequency and voltage before synchronizing. There are volt meters and digital meters in the device that offer generator and bus measurements. Uses & Applications There are various areas where synchronization panel finds application. Some of the popular application areas include Engineering Systems Multiplexing Multiple Generators Multimedia Communications Telecommunications Data Synchronization Semiconductors Electronic Equipments

We bring forth a wide array of Auto Synchronizing Panel that is used primarily for the synchronization of generators. The company is an established Manufacturer and Supplier of Generator Auto Synchronizing Panels from Hyderabad. Our range of Generator Auto Synchronizing Panels are  highly effective in running two or three generators parallel with each other while maintaining the same electrical parameters for two/three DGS. The Synchronizing Panels have huge demand in market for their appropriate functioning and providing complete protection to generators.

Fully automatic synchronizing panels operated by microprocessor-based relays. AMF, Auto synchronizing, Manual synchronizing, Auto load sharing, Active & Reactive power management with protection such as U/V, O/V E/F, O/C IDMT, Reverse power etc. Load balance metering such as Ammeter, Voltmeter, KW, PF, KWH, Double. Volt, Double Frequency Meter & Synchroscope etc. COLD FORM LAMINATE (Alu-Alu Blister) is been represented as the new generation in pharmaceutical packaging, Material with - Best barrier performance at present which is Suitable for High-speed packing applications, Barrier to – UV rays, Moisture & Gases. SALIENT FEATURES: Load Manager, Power reverse protection Earth fault, filed lost control, auto manual synchronization, dual volt meter, dual frequency meter, all comes in a single panels. Automatic start and stop of the generator and changeover the EB/generator lines Auto/manual selector is available Genset stop with delay of 3 min Hooter-alaram annunciation for fail to start Checklist to find the fault and to correct 4ST switch control for healthy start and stop of genset Manual start & stop switch Available with emergency stop switch Auto LLOP (Low Lube Oil Pressure) and (High Water Temperature) protections are available (LLOT & HWT Sensors-Relays are not part of this panel\provided with control wires and safety according to their generators standard

We configuration, fabricate, establishment and authorizing of DG synchronization board. Power is unmistakable need of the present focused market and everybody needs nonstop power supply that is making conceivable through synchronization of DG sets (crisis supply) with mains supply. We are giving DG to DG synchronization, DG to MAINS (GRID) synchronization and Reverse synchronization that is base load age in auto and manual mode both. We are giving extensive variety of DG synchronization board ranges from 35 kVA to 1000 KVA or more. We are giving answer for customer's current framework and in addition design framework through propel building aptitudes. Our synchronizing Panel is planned and produced according to IP principles. This board is fabricated utilizing quality segments and the most recent control framework. Synchronization Panel Provides : Auto/ Manual mode synchronizing Uninterrupted power supply Wide range of synchronizing 35 kVA to 1000 KVA and above Maintenance free operation Automatic voltage regulation

We manufacture best quality LT- Auto Load Sharing & Synchronizing Panels suppliers in Telangana and Andhra Pradesh. Synchronization panels are mainly designed and used to meet power system requirements. These panels function both manually and automatic synchronizing function for one or more generators or breakers. Synchronization panels are mainly designed and used to meet power system requirements. These panels provide manual as well as automatic synchronizing function for one or more generator breakers. They are widely used in synchronizing generators and offering multiplexing solutions.

In the event of power failure or imbalance of Voltage from the EB Incomer, DG I will get start automatically and get connected to the load with reference of EB breaker/EB supply, basing on the load DG II will start and get Synchronize with DG I and the load will be shared between both the DG Sets. When the EB supply is resumed the system will check for quality and stability of Voltage and the system will get revise Synchronize with EB Supply and the load will be smoothly transfer to EB supply without any interruption, the DG breakers will get switched off on pre set time and the DGs will get switched off after pre set cooling time. Multiple Paralleling gen set and Grid control with internal load sharing and Synchronizing Considering the percentage of power cut / load cutting. The either of DGs will start automatically basing on the loads and get Synchronized with EB Supply (Grid) and the load will be smoothly transfer to DG I accordingly, and the DG II will start automatically based on the pre set load. When the EB supply is resumed the system will check for quality and stability of Voltage and the system will get revise Synchronization with EB Supply and the load will be smoothly transfer to EB supply without any interruption, the DG breakers will get switched off on pre set time and the DGs will be put off at the pre set cooling time. The option of setting the supply from any of the source i.e. either EB supply or DG I or DG II or all the three sources, all the operations can be done in auto mode, and also in manual mode (in the case of emergency). In case of any maintains in DG I, the system will automatically switch On the DG II and vice versa. During the load sharing the system will automatically balance the load, and Synchronizer will display Active & revise load and other parameters on the display screen.

Synchronising Panel offered by us, is manufactured at the unit under the supervision of expert professionals. Our Synchronising Panel needs low maintenance, especially in case of relays, wires and contractors. We use software to design our Synchronising Panel. These designs of Synchronising Panel can also be changed as per specifications mentioned by the clients. In place of voltage and current, our Synchronising Panel can be started or stopped depending on the load in regard to KW. Salient Features Easy to install High durablilty Precise readingsLow maintenance

dg synchronizing panel, Battery Charger Panel, TAP OFF BOX

Synchronizing Panel, Control Panel Boards, solar structures

DG Synchronization Panel

Synchronizing Panel, Distribution Boards, Street Light Poles, Plc Panel

Synchronizing Panel, auto synchronizing panels, Plc Control Panel

Synchronizing Panels, AMF Panels, Diesel Generating Sets