Testing Equipment Dealers in Banjara Hills, Hyderabad

All measurements are PassFail type tests with proper LED indications. By means of five push-to-test switches, tester can detect shorts, opens, shorts to shield and phase reversal (cross over) on the Bus and Stubs. Easy to use hand held battery operated equipment ™ Low cost, light weight and easy to use by single person ™ Fast and easy testing with GoNo-Go LED indicators ™ Required no Main Bus disconnection

Our Battery monitoring system ensures the optimal usage of energy inside the battery powering the product. It smartly operates by preventing costly downtime due to unexpected battery failures. Traditional estimates, with proper management system can make battery life reach the level of design expectations

Based in Telangana(India), we have gained wide appreciation owing to our high quality products and client-centric approach. We guarantee to make on time delivery, as we have an extensively spread network of logistic facility providers and dealers.

• Minimum Velocity: 0.2 m/s
• Maximum Velocity: 20 m/s
• Measurement Accuracy: ± 0.3% – Speeds are rounded down to the nearest tenths of a unit
• Weight: 1.2 kg (2.4 lb)
• Dimensions: L 21.8 cm (9.2 in), H 25,9 cm (10 in), D 7.9 cm (3.2 in)
• Case Material: Die Cast Aluminium & Composite (PVC)
• Type: Ka-Band
• Nominal Transmission Frequency: 34.7 GHz
• Nominal Horizontal Beam width: 12° (+/- 1°)
• Nominal Microwave Power Output: 15 mW nominal mW
• Maximum Aperture Power Density: 1 mW/cm2
• Supply Voltage Range: 7.2VDC – 20VDC
• Power Supply: replaceable Li-ion batteries, 18V / 1.3Ah
• Standby: 0.200 amperes
• Antenna on: 0.450 amperes

• Type: Meter Reading System
• Country of Origin: Made in India
• Application: Industrial
• Brand Name: Argus

We give maximum importance to the quality of the products that we offer and thus conduct diverse quality tests. Purchasers can rely on us to make on time distribution of orders, as we have cooperated with established transportation facility providers. Our Pump Testing Equipment has a sturdy body with protective polish on the surface for a longer service life. 

• Type: : Batch Mixer.
• Model: : SM 30 / C,SM 30 / S, SM 30 / D
• Capacity: : 30 Kg / Batch.
• Connected Main Motor: : 5.5 kw / 7.5 HP.
• Silicate Feed by: : C. I. Geared Pump.
• Pump Motor For No-Bake: : Pump for Resin: 0.25 kw / 0.33   HP Magnet coupled C. I. Geared   Pump. Pump for Hardener: 0.18   kw / 0.25 HP Magnet Coupled SS   316 L Geared Pump.
• Control Panel: : PLC controlled with Two Program   loaded complete for two   selections either silicate or No-   bake what ever you want.

Super Mixer (Spherical Bowl Mixer) is unlike conventional mixer-Muller for No-bake and silicate sand mixing. This Mixer consists mainly of a newly developed mixer Bowl. The mixer has a spherical construction with specially designed high-speed two action blades, which gives three-dimensional movement for thorough mixing of sand with silicate, organic binder or catalyst in any combination in just 15 to 18 sec. Models available for chemically bonded sand/silicate sand and dual capability. Complete mixing in short time and uses lesser amount ofbinders. If in your conventional mixer using 5% silicate, weensure you that at list 1% of silicate you can save in our mixer. Due to three-dimensional mixing at high speed, no unmixedsilicate balls are there. And cause of that you can get goodsurface finishing of casting and save fettling cost indirectly. Cleaning can be easily done since sand does not remaining inthe mixer bowl due to bottom discharge. Compactly designed, molding sand can be accuratelysupplied at any time without waste, due to lower batchcapacity 15 kg to 30 kg. It is not possible in conventional mixer. Weighing and mixing of material are automatically controlledfor rationalization of work. Due to automation only one switchoperation is there, so only one person or molder can operatemixer whenever needed. Result of this process leads to manpower saving. Although it is of small sized model; its capacity is comparableto large sized mixer when operated continuously. Breakdown is minimized and maintenance is easy due toSturdy and compact design. No need of major civil work orspace. Can be use as Core Sand Mixture.

automatic test equipment, PIC24F Development Board, Cable Assembly

Digital Breathalyzer, CCTV Camera, Pepper Spray

Energy Meters

Hm TDS 3 Digital Pocket TDS Meter, column formwork

Glucose Meter, bp monitors, personal ecg machine, Air Beds

vehicle testing equipment, Flight Data Recorder, Line Echo Cancellers

smart meters

The Bulk Density Tester, Scott Volumeter, is described in USP Chapter Method 2 is designed for measuring the bulk density of fine powder and similar products. This Apparatus PEP-S-304 is used to determine apparent density of microcrystalline cellulose. The upper funnel contains a 1018 mesh wire support and uses a cylindrical or square 25.00ml 35.00ml+- 0.05ml stainless steel density cup.

Barometer, Clamp Meter, Digital Hygrometer, emf tester, Flue Gas Analyzer

Battery Monitoring System, Aircraft Battery, Rentar - Fuel Catalyst

Testing Equipment, measuring equipment

Laboratory Testing Instruments, ecg service, Ecg, ct scan services

Testing Equipment, bowl mill spare, measuring equipment

electronic testing equipment, Electrical Testing Equipment

GPS Tracker, Weather Monitoring System, Water level logger

Deep Freezers, portable blood bank refrigerator, Laboratory Refrigerator

Multi channel Data acquisition systems, CPE or Routers, Automotive Products

Test One Diagnostic Tester, Currency Binding Machine, Car Scanning Services

Corrosion Monitoring, backplanes, Optical Data Couplers, ethernet

Hydrostatic Pressure Testing