Testing Equipment Dealers in Sanath Nagar, Hyderabad

The Extech EN300 Environmental Meter has a Large dual LCD simultaneous display of Temperature and Air Velocity or Relative Humidity. Characters on the display reverse direction depending on Hygro-Thermo-Anemometer or Light-Sound Mode. The EN300 has a built-in low friction vane wheel that improves accuracy of air velocity in ft/min, MPH, m/s, km/h, and Knots. It also has a built-in precision thin-film capacitance humidity sensor for fast response and thermistor for ambient temperature measurements.   Features: Data Hold to freeze the displayed value Records Min/Max readings Type K input measures temperature to 2372° (1300°C) Utilizes precision photo diode and correction filter for Cosine and color corrected light measurements Sound Level measurement meets IEC 61672 class 2 using A frequency weighting and fast response time Defaults to last function when powered off Auto power off 10 minutes after last key is pressed with disable feature Low Battery and over range indication.     Sound Level:   Microphone: ½” Electret condenser microphone   Measurement Range 35 to 130 dB, Auto range   Resolution 0.1dB   Frequency response 31.5Hz to 8,000Hz   Weighting " A " frequency weighting network   Time Response "Fast"   Accuracy   Meets IEC 61672 class 2, A weight, Fast response   Note: Stated specification tests under the environment RF Field Strength less than 3 V/M & frequency less than 30 MHz only     Note: Specification stated for 23± 5°C

• Accuracy: ± 0.01
• Range: 0 to 14
• Readability: 0.01
• Repeatability: ± 0.01

LI-120, Digital PH Meter Manual 2 point calibration for pH,Manual Temperature Compensation,Measures pH and EMF,Accurate & Highly Stable,Elegantly Styled.Small, Laboratory Version

• Resolution: 1
• Temperature: Range
• pH: Range
• 0 to 14: Readability
• 0.01: Accuracy
• ± 0.01*: Repeatability
• ± 0.01: Stability
• ± 0.05 in 8 hrs: EMF in mV
• Range: ± 1999
• Accuracy: ± 0.1% of Range or ±1 counts
• Repeatability: ± 1
• 0 to 100°C: Resolution
• 0.1 °C: Accuracy
• ± 0.5°C: Repeatability
• ± 0.1 °C: Compensation

• Material: Stainless Steel
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible, Multi Jet
• Voltage: 220V
• Application: Industrial
• Automatic Grade: Automatic
• Driven Type: Electric

The powerful transmitter is easy to use and provides the output signal that meets the needs. ProcessMaster FEP300 is a versatile, reasonably priced, most accurate flow meter tailored for all process industry applications. A flowmeter with base functionality, short delivery and a simple and clearly understandable documentation.     Versatile and simple configuration                 – Through glass configuration eliminating the need to remove the cover and reducing commissioning time                 – Soft key based functionality                – "Easy Set-up" function     State-of-the-art memory technology – Data storage enables transmitter exchange without the need for reconfiguration   Diagnostics for real-life-situations                  – Simplified plant trouble shooting                 – Status messages in accordance with NAMUR                 – Help texts in LCD display   ScanMaster in situ verification software option               – Allows the customer to perform in situ verification of the flowmeter and the plant   General specifications:     Measuring value error            – Standard 0.4 % of rate, optional 0.2 % of rate  Nominal diameter           – DN 3 to 2000 (1/10 to 80 in.)   Process connection           – Flange in accordance with DIN 2501 / EN 1092-1, ASME B16.5 / B16.47, JIS, AS2129 §  Nominal pressure            – PN 10 to 100,             – ASME CL 150, 300, 600, 900, 1500, 2500   Lining            – Hard rubber, soft rubber, PTFE, PFA, ETFE, Linatex  Communication             – HART, PROFIBUS PA, FOUNDATION Fieldbus   Explosion protection approvals             – ATEX, IECEx, FM, cFM, NEPSI, GOST Special features:     Process diagnosis             – Empty pipe and partially filling detection

Based in Telangana(India), we have gained wide appreciation owing to our high quality products and client-centric approach. We guarantee to make on time delivery, as we have an extensively spread network of logistic facility providers and dealers.

Intelligent key management with compulsory alcohol testing – this system will not allow vehicle keys, or keys to access hazardous equipment, to be released until the user has passed an alcohol breath test. Can be integrated with series of Traka Key Management Systems. Provides extra access protection from non-alcoholics access the Keys. The alcohol fail level can be set to pre-determined levels such as Zero Tolerance.

• Single Barrel Tension Tester: 30 lbs.
• Double Barrel Tension Tester: 66 lbs.
• Capacity of Tester: 0-250kg
• Speed Range: 0.1 mm / min to 500 mm / min
• Touch Pad HMC Size: 7 inch
• Displacement Resolution: 0.1 mm

This is very simple and efficient handy tool for use with all small V-Belt and synchronous drives, including PowerBand® and Poly Chain® GT® belt drives.

surge comparison tester Surge comparison tests are widely applicable for AC motors, DC motors, transformers, coils, wires, cables, capacitors etc. PtA’s services are well appreciated for its quality of testing . This surge comparison test helps in reducing the amount of damage or catastrophic failures of the motors and ensuring longer life to the power equipment.

• Feature: Optimum performance, Compact size, Defect free

• Max. resolution: 0.16 mm
• Input Type: mV, mA, V DC
• Packaging: Packed in corrugated boxes

The Most Advanced 24-Channel Scanner : Model 85XX 24-Channel Temperature Scanner/DAQ Moduleis a multi-channel monitoring, Alarm annunciation and Protection Device. With more than 25000 units in operation, 85XX is the Number One choice of OEM and End-Users for their monitoring and Protection Application. The unit is Modular, Field scalable and has variety of communication options to interface with PLC/DCS/SCADA systems.Modular and Expandable : 85XX is modular in architecture and Expandable, 5 I/O slots can accommodate a mix of Analog Input, Re-Transmission, Open collector or Relay output to suit different applications in Power, Process, Water and Infrastructure industries. All field inputs are wired to a detachable back plate for ease of wiring and reduce downtime during replacement.Configuration : 85XX is configured using the mSCAN software; the unit can also be edited by front keyboard and display. The unit has numeric displays for CH. NO. And Value, Alarm/Trip Annunciation is done by individual discrete LEDs on front fascia. The unit is fully password protected for configured data.Communication : 85XX comes with one RS232/485 Modbus RTU port as a standard, Profibus-DP and Modbus over Ethernet (Modnet) are options available to enhance the communication capabilities of the unit and use it as an RTU, Alarm controller or protection device for motors, transformers etc. All configured parameters, real time values and status are available on all communication protocols. Alarm/Trip or Control : 85XX comes with 3 Groups/6 Relays as standard but upgradeable to 6 Groups/12 Relays as an option. The Relay outputs can be freely mapped to any channel set points and configured as Alarm or Trip functionality with Fail-Safe or Normal Logic. 85XX has the most comprehensive Alarm/Trip logic to handle momentary and maintained Alarms, with Auto-Reset and Ack Reset functionality. The 48 OC output option can be used as On/Off control output for individual channel or as a status output for Alarm condition. Features of 85XX DAQ Module : Modular and Scalable 8/16/24 channel configurations EMI/EMC Type test qualified Universal input for each Analog Input Max Configuration: 3 Input modules (AI) + 2 Output modules (Relay/AO/OC) Comprehensive alarm/trip logic Free mapping of Relay to Channels/Group Windows based mSCAN configuration tool Options : Upto 4 Retransmission output (Isolated) Modnet/Profibus-DP Communication 48 open collector outputs Channel to channel input isolation Weather proof / flame proof enclosure IP65 Front Facia Applications : Substation Monitoring Motor/Generator Monitoring and Protection Transformer monitoring and protection Compressor/Pump/DG set monitoring Asset Monitoring As an Serial/Ethernet/Profibus RTU Remote I/O module Multi Point On/Off control Pipeline Heat Tracing circuit control Remote I/O for PLC/DCS/SCADA

Digital Flux Meter has been the established standard for the measurement of magnetic flux density for determining total flux in a magnet or magnetic assembly. Its use was curtailed except in a few specialized areas because of many factors such as the difficulty in setting up light beam fluxmeter or ballistic galvanometers, limitations on the ohmic resistance of search coils, the requirement of some degree of operator skill in reading the fluxmeter etc.

VISIONTEK 37TM Three Phase Electronic Energy Meter is designed to meter residential and commercial category consumers in distribution networks. The meter is targeted at the deregulated energy markets which require flexible tariff structures and a modern energy management.37TM is a perfect combination of well-proven metering technology sealed in a single enclosure with multiple communication interface options. 37TM Energy Meter complies with IS-13779, CBIP-TR 88 and communication protocol in accordance with BIS ICS ETD 13 doc 6211 (IS 15959) Category C for interoperability.

• Features: Highly demanded, Rigid construction, Excellent performance

Electricity has become a basic unit of today’s modernization and business growth. This demands reliable and accurate devices to measure and track the quality and consumption of electricity, by both suppliers and consumers. winAMR focuses on design and development of modern metering products which assures precise and trustworthy metering, thus ensuring increased revenues for winAMR clients. winAMR offers dynamic meters specifically designed for remote communications with a variety of metering systems. Our smart meters are very economical and efficient alternatives for metering applications; ranging from residential, commercial, municipalities and industrial in regulated and deregulated markets.winAMR’s novel electronic Single and Three Phase Meter – IEC 62053 or BSEN 504701,3 promises high quality, accurate measure, value for customers and is an universal application with hybrid communication standards.winAMR’s smart meter features advanced function circuits boards, which is easy for up-gradation and abide to international (IEC) and national standards such as DIN, BS, VDEW, and ANSI.winAMR offers a line of electronic and electo-mechanical single and three phase meters giving our client a choice of cost-effective meters for measuring kilowatt-hour energy consumption. With the hybrid communication options and support software, our single and three phase meters can be easily incorporated into automated meter reading systems.

• Feature: Test drinking water , High performance, Easy to use

• Brand Name: Mettler Toledo
• Application: Industrial, Laboratory
• Model: FP 30

• Dimensions: 300 X 230 X 225

We are offering a precision engineered range of A.C High Voltage Breakdown Testers, which is widely used for checking the high voltage withstanding capacity of insulation material. Our range is extensively used in railways, electricity boards, defense, communication centres, R & D units. Moreover, our range is appreciated for offering great operational flexibility and hassle free services for years.

TAMPER & FRAUD DETECTION FEATURES Load Reversal & Phase sequence reversal Detection of missing potential Reversal of C.C.(Counter coil) polarity. 2 Phase & Neutral Present 3Phase & Neutral Missing Over Voltage One phase & Neutral Present Abnormal Voltage Voltage unbalance Current Unbalance / High neutral current (CT bypass) Power on time (Phase wise) / DC immunity/ C.C shorting Power on/off/ Recording of Neutral disturbance External Magnetic tampers. SALIENT FEATURES Billing History for last 12 months. Instantaneous   voltage / current / Load, Frequency & maximum Demand.  Average Power Factor for 30 minute intervals for the last 12 months Load survey for     30 minutes integration time for KW/KVA for 70 days, Communication Media. Optical Port Infra red Rs-232 /RS485  5 Zone TOD KWh, KVAh & kW & kWA Programming   is  also  provided  for the  RTC Calibration / T .O.D. configuration Power fail logic provided to read the data on L.C.D. COMMUNICATION FACILITIES RS 232 RS 485 Isolated Optical Communication port Through CMRI/Public Switch Telephone Network/Low Power radio/GSM. SOFTWARE           Base computer system with the facility to convert required data into            formats as per utility requirement  for billing purpose.  

automatic test equipment, X-Ray Machines, radiography equipment

The Bulk Density Tester, Scott Volumeter, is described in USP Chapter Method 2 is designed for measuring the bulk density of fine powder and similar products. This Apparatus PEP-S-304 is used to determine apparent density of microcrystalline cellulose. The upper funnel contains a 1018 mesh wire support and uses a cylindrical or square 25.00ml 35.00ml+- 0.05ml stainless steel density cup.

Olympus make ultrasonic flaw detector for testing the raw material including BNC transducer connectors, multi-color display with multi color schehemes and variable brightness control EP4MCA charger adaptor

Gas Meter, Gas Regulator, Gas Burner, Chemical Anchor, Core Drill Machine

bond tester, immunoassay analyzer, Potentiometric strip chart recorder

labs testing equipments, hv tester, achv tester, Water Bath

Insulation Tester, Barometer, Clamp Meter, Dew Point Meter

Water Meters, Solenoid Valves, Supply

tablet disintegration test apparatus, Deep Freezers

O Ring Leak Testers, Gas Cut Off Valves, lpg bottling plants, LPG Station

Asphalt Testing, Analytical Instruments, Scientific Equipment, Dehumidifier

three phase energy meters, single phase energy meters