Testing Machines Dealers in Hyderabad

Load capacities: KUT (E): 100, 200, 400, 600, 1000, 2000 & 3000kN 4 column construction with excellent alignment and good shock absorption Dual test sapce design for reduced test set up time Lead screw driven crosshead to adjust test space Testing speed range: 0 to 300 mmmin Encoder based feed back for position control & display Position control resolution down to 0.01mm Servo proportional valives for precision servo control Long strokes up to 300mm

• Capacity: 100-200 Ton
• Type: Manual
• Usage/Application: Concrete Cube Testing Machine
• Make: ACE-LKV

We are the manufacturers and supplier of this products.

• Weight: 50 KG
• Application: Cable Testing
• Brand: Megger
• Model Number/Name: VLF
• Usage/Application: Performs cable withstand testing, cable diagnosis and sheath fault pinpointing
• Display: LCD
• Frequency: 0.1HZ
• Dimension: 544 x 520 x 416 mm
• Operation Temperature: -20 DegreeC ... +55 DegreeC
• Storage Temperature: -10 to 60 deg C
• Operating Time: More than 4 hours
• Operating Humidity: 10 to 90% RH

• Automatic Grade: Automatic
• Power: 1-3kw
• Warranty: 1 Year
• Voltage: AC 440 V
• Material: Material
• Phase: 3 Phase, 50 cycles

The machine consists of a hollow cylinder mounted horizontally on a sturdy frame on ball bearings. There is an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test. A detachable shelf which extends throughout the inside length of the drum which catches the abrassive charge and does not allow it to fall on the cover. The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.m. A revolution counter is fitted to the frame. A tray is supplied for collection of the material at the end of the test. Complete with abrasive charges consisting of a set of twelve hardened steel balls, approximately 48mm dia.

• Driven Type: Electric
• Usage/Application: Industrial
• Power: 6-9kw, 230 v AC
• Weight: 5kg
• Voltage: 220V
• Color: Brown
• Country of Origin: India

opacity monitoring system has been designed for measuring the pollutants with in the stack emission.vasthi has mainly designed the stack opacity meter for cement plants, steel plants etc., technical specifications: no. parameter units min max comment1 path length (flange to flange) m 0.5 20 flange-to-flange separation2 measuring range % 0.0 100.0 user selectable3 accuracy % -2 +24 resolution % 0.1 display resolution5 damping s 1 60 selectable6 drift with temperature % -2 +2 over any 20°c in the operating range7 operating wavelength nm 510 540 green ledpower & air requirements8 voltage vdc +24 optional 90-260vac psu available9 voltage tolerance % -10 +1010 nominal current consumption ma 40011 power up current consumption ma 40012 air supply volume flow l/min 50 200 to each air-purge body.13 air supply fitting:1” bsp threaded aperture in each air-purge body cable and wire14 cable type – tx/rx interconnection cores 6 screened multi-core, such as belden 987315 cable type – oi/rx interconnection cores 4 screened multi-core, such as belden 987316 wire size at terminal connections awg 20 14 interface options17 serial commsmodbus rtu via rs485 (oi or trx) internal usb (oi), external usb (rx)18 analogue output (one) ma 4 20 isolated and scalable19 digital relay contacts (two) a 0 3 @30vdc (signal level and data valid)physical20 ingress protection: – tx/rx heads ip65 for external use21 ingress protection: – oi wall mounted ip65 hinged door and terminal compartment shut.– oi panel mounted ip64 from front face of panel when installed.22 ambient operating temperature °c -20 +55 air temperature around the heads.23 operating humidity % 100 air humidity around the heads.24 gas temperature °c +600 heat insulating gaskets included.(higher temperatures on request)25 regulatory compliance 89/336/eec (electromagnetic radiation) 73/23/eec (low voltage)26 materials: – tx/rx heads 316 stainless steel (powder coated)27 materials: – air-purge bodies powder coated cast aluminium or stainless steel for demanding installations materials: – oi wall mounted ul rated polycarbonate enclosure; aluminium front panel with pu laminate overlay and with nylon cable glands28 – oi panel mounted powder coated steel back-box; aluminium front panel with pu laminate overlay and with nylon cable glands29 weight kg 2.5 tx or rx head plus aluminium air-purge body30 weight: – oi wall mounted kg 1.3 – oi panel mounted 1.3

• Dimensions: 180MM X 100MM X 40MM
• Weight: 450 GMS WITH BATTERY. APPROX
• Resolution: 1 DB
• Operating Temperature: 00 C TO 50° C
• Power: 1 X 9V 6LR61 DURACELL OR EQUIVALENT
• MEASURING RANGE: 0 TO 100 DB
• KEY PAD SEALED: MICRO-SWITCHES
• DISPLAY: 16 X 2 LINE DOT MATRIX LCD

Maynard's M-2021T Bearing Tester is a handy, quick, preventive maintenance bearing monitoring instrument for on-the-spot checking and evaluation of the condition of all the ball and roller bearings. A regular check / monitoring on bearing condition to evaluate, foresee and reveal developing faults at a very early stage to avoid any kind of unforeseen production loss or plant breakdown.For bearing monitoring, Bearing tester will provide you with the right information instantaneously anywhere and anytime. The information which allows effective action plan to improve plant efficiency, optimize production and reduce downtimeMicroprocessor based Maynard's M-2021T Bearing Tester works on echo (shock) pulse method. Bearing Tester gives a direct evaluation of the bearing operating condition while it is still running in a simple and easy to evaluate color coded zone conditions. Green zone for GOOD operation condition, Yellow zone for REDUCED operating condition and Red zone for BAD operating condition of the bearing at a quick glance apart from numeric values.  MAYNARD`S PRODUCT RANGE THERMO LOGGER BEARING ECHO METER M-900 AUTOMATIC SINGLE POINT LUBRICATOR AL-96 NON-CONTACT TEMPERATURE MEASUREMENT M-9 CONTINUEOUS BEARING MONITORING SYSTEM M-99 ON-LINE NON –CONTACT INFRARED THERMOMETER M-2025 UV FLUORESCENT LEAK DETECTION SYSTEM FOR A/C & REFRIGERATION BATTERY CHARGING AND DISCHARGING MONITOR

• Country of Origin: Made in India
• Display Type: Analog
• Automation Grade: Semi-Automatic
• Model No.: CTE
• Material: Stainless Steel

The machine consists of a hand operated load frame. The lower platen has two rollers, the distance between which is adjustable. For 150mm x 150mm x 700mm beam, the centre to centre distance between the rollers is 600mm, while it is 400mm for beams of size 100mm x 100mm x 500mm The upper platen has also a pair of rollers whose distance is adjustable. It is 200mm centre to centre, for 150mm X 150mm X 700mm size beam and 133mm for 100mm 100mm X 100mm X 500mm size beam. A pressure gauge to indicate load is fixed on the load frame. A small pumping unit is attached to the load frame. Total capacity of the machine is 100 KN and a 150mm dia pressure gauge - 100 KN x 1 KN is fitted on the machine. Since this is a hand operated light weight machine, it is useful for field laboratory also.

Sleek & handy design, comes in a slim briefcase, for carrying the machine. Mainly used to check hardness in confined spaces, on large & heavy components, permanently installed parts with low test expenditure.   The machine has built in conversion facility for given material to convert 'D' value to Vickers (HV), Rockwell (HRB,HRC), Brinell (HB), UTS scales which can be selected by pressing arrow keys The model operates on two numbers of pencil cells. 30 hardness scales for different probes selectable by feather touch keys. Alpha numeric display - 16 characters x 2 lines LCD with improved electronics, micro controller circuity & user friendly software. Display indicates selected material & scale combination & hardness value. Five numbers of probes D, G, SH, EX & C can be given in different combinations.. Facility to connect dot matrix printer through centronics parallel port. Upto 999 readings can be stored in memory of the machine for printing purpose. Serial interface is possible with RS 232 port at an additional cost. Automatic calibration facility of probe is available through keyboard. Extra (Optional) Accessories such as Standard test blocks, support rings, printer, serial interface, different types of probes are available.

• Material: Mild Steel
• Color: Orange
• rand: Ankit
• Usage/Application: Concrete Testing
• Phase: Three Phase
• Model Name/Number: 2000 KN
• Size: 5 x 5 Feet

Fluke 985 Particle Counter comes with a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick it’s easy to review and analyze the data anywhere and anytime.   Features: • Six channels and a particle size range of 0.3 μm to 10 μm • Ultra-lightweight and ergonomic design for easy single-hand operation• Ten hours of standard-use battery life to last a full work day• Large 3.5 inch QVGC color display with backlight, intuitive icons,and large font options make for easy navigation and viewing• 10,000 records stored in device for easy access to historical data• Data can be viewed in traditional tabular or trend graph at the user’s preference• Configurable display, sample methods, and alarm setting for sample size count (raw count, per cubic feet, cubic meter, or liter)• Data export to USB memory stick or direct connection to PC via USB cable. No special software required to view Excel compatible files• Ethernet enabled for accessing data via internet browser (Windows Explorer, Safari, and Firefox)• USB/Ethernet charge cradle ensures the unit always ready for use• Administrator password control (optional) for added security• Meets ISO 21501, JIS B9921, and CE standards

• Material: Mild Steel
• Capacity (Ton): 100
• Diameter (mm): 400 x 500 x 1060
• Weight (kg): 230

• Material: Iron
• Phase: Three Phase
• Voltage: 240 V
• Features: Easy maintenance, Strong design, Flawless performance
• Usage/Application: For Concrete Cubes Testing
• Display Type: Digital
• Frequency: 50 Hz
• Power Supply: Electric
• Motor Power: 1 Hp

• Features: Easy to operate, Sturdy construction, High sturdiness
• Item Code: QC-5xxA1

• Material: Aluminium Body
• Voltage: 415 V
• Weight: 45 Kg
• Brand Name: Supermag
• Phase: 2 Phase
• Automation Grade: Semi-Automatic
• Frequency: 50 /60 Hz

• Automation Grade: Automatic
• Capacity: 200tons
• Phase Type: Three phase
• Color: Blue
• Condition: New 
• Gauge: 2000kn
• Loading Range: 1800kn
• Motor Power: 1.5hp
• Piston Diameter: 225 ram dai

• Length: 25 mm & 50 mm
• Diameter: 0.5 to 30 mm
• Thickness: up to 30 mm
• Width: up to 30 mm

This machine is used to test the tensile and compressive properties of material. The reason Universal Testing machine is named so because it can perform all the tests right from compression, bending to tension and examine the material in all mechanical properties. We offer these in grade of 10T, 20T, 40T, 60T and 100T. Accuracy & Calibration All Mechatronic Control System’s Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every Machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610: 1964 and IS: 1828-1975. Mechatronic Control System’s Universal Testing Machines Comply with grade “A” of BS : 1610 : 1964 and grade 1.0 of IS -1828-1975 An accuracy of + 1 % is guaranteed from 20% of the load range selected to full load. Bellow 20% of the selected range, the maximum permissible error is 0.2% of the full reading.

• Features: Tensile Tester are manufactured in different capacities upto 10,000Kgf. in our LabTek ensuring + 1% accuracy in the test results.

We bring top quality Magnet Testing Machine and magnetic sorting machine to test and sort alnico magnets in three groups viz., good, average and bad.

If you have trouble breathing, our CE/ISO Quality Standard BiPap machine can help push air into your lungs

universal material testing machine

vibration test systems, Environmental Test Chambers, Centrifuges

Metal Testing Machine, Frequency Response Analyzer, Gm Counter

Vibration Testing Equipment

Olympus make ultrasonic flaw detector for testing the raw material including BNC transducer connectors, multi-color display with multi color schehemes and variable brightness control EP4MCA charger adaptor

vibration test system, Environmental Test Chambers, temperature chambers

We (SVS Hydraulics pvt.ltd.) Introduce ourselves as a leading manufacturer of TENSILE TESTING MACHINES . Ours is an ISO 9001-2008 Certified Company. We have a full fledged manufacturing facilities at our works situated at chintal, Hyderabad, A.P India.We are supported by a team of qualified and experienced Engineers who have wide exposure in handling a variety of equipments, designing and manufacturing of Automation systems based on Hydraulics and Pneumatics. Based on our vast exposure to different kind of equipments, we can offer customized solution for any kind of Hydraulic, Pneumatic and Material handling problems.   

portable gold testing machine, bond tester, immunoassay analyzer

Hardness Testing Machine, Carbon Sulphur Analyser

hearing testing machine, Hearing Aids, Hearing aid Batteries