Thermo Cables Pvt Ltd Panjagutta, Hyderabad, Telangana

We offer Thermo Trace. Thermo Trace – Self Regulating Tracers (for industrial applications) Thermo Trace self regulating cables can be used for process temperature maintenance on process pipelines, vessels, tanks, equipments etc. Thermopads offers Thermo Trace STF and Thermo Trace STP Operating Principle Selftrace derives its self-regulating characteristic from the inherent properties of the semi conductive core material. As the core material temperature increases, the number of conductive paths in the core material decreases, thus decreasing the heat output. As the temperature decreases, the number of conductive paths increases, causing the heat output to increase. This occurs at every point along the cable’s length, adjusting the power output to the varying conditions. As the cable self-regulates its heat output, it limits the maximum sheath temperature, thus making it burn-out proof.

We are offering insulation pads. Thermal insulation pads are ideal for gas turbines, valves, filters, meters and other accessories in a process line. They insulate the hot surface, ensuring energy conservation, protection of operators and providing comfortable work environment. These are typically used as a backing over the heating jacket or heating panel, to ensure better heat efficiencies and minimal energy loss is minimal. The flexible construction of 'thermo insulation pads' enables tailoring to any complex shapes and providing a perfect, snug fit on complex shaped surfaces. Construction insulation pads consist of 2" thick (or as required) lagging of fibre glass wool insulation, embedded in two layers of fibre glass cloth. Outer layer of fibre glass cloth can be flame retardant aluminized or pvc coated or teflon coated as required. The final pad is shaped based on the required surface to be insulated to encapsulate the surface or equipment in it. Required cutouts for obstructions and velcrow or eyelets and strapping lays are provided to make it snug fit on the surface or equipment.

We are offering hopper heaters (for hoppers and bag filters) thermo hopper heating systems play an important role in the removal of fly ash from precipitators and bag filter hoppers. The hopper heater is designed to preheat the hopper to prevent moisture condensate from collecting in it during startup conditions. In addition, they maintain the hopper and fly ash at temperatures above the flue gas acid dew point during normal operating conditions construction thermo hopper heater comprise of flat heating elements and wire type elements, uniformly distributed and sandwiched between multiple layers of fiber glass cloth. This complete assembly is housed in tamper proof rugged high temperature resistant aluminum body. The heating element is connected to power supply through fibre glass insulated and silicon rubber sheathed cable

We are offering heating jackets (for process vessels, storage tanks etc.) thermo heating jackets are ideally suited to raise or maintain elevated temperatures of the contents in reaction vessels, storage tanks, tankers and process equipments in industries. They find application in chemical and pharmaceutical industry to heat viscous fluids, cement industry in hopper heating to remove moisture in the flue gases, in packaging industry for free flow of gums and in metallurgical industry for annealing of metals, etc. This flexible electric heater provides heat from the external surface of the device to be heated. They eliminate high investment and operating costs associated with steam, oil, fire wood & conventional electric heating. heating jackets construction thermo heating jackets comprise of flexible heating elements, distributed very uniformly on to a fibreglass or quartz cloth carrier. The fibreglass or quartz cloth carrier is tailored to the shape of the vessel to be heated. Eye-lets and laces provided on the panels, ensure a snug fit of heater on the surface being heated, avoiding any air gaps. The heating elements terminate on cold leads, which are connected to the power supply.

We are offering heating cables hc3/ex-hc3 thermo heating cables hc3ex-hc3 are the hardy and tough heating cable. When the ambient runs low, strap our workhorse heating cable and keep the fluid flow. Heating cables hc3ex-hc3 maintains temperatures in pipelines and storage tanks to keep fluids in flow state. They are the ideal for process heating requirements in oil & gas, petrochemical, power, chemicals & fertilizers, metallurgical, cement, pharma, food and edible oil industries. Construction heating cables hc3ex-hc3 is a series type heating cable with single conductor (multi strand & spiraled) heating element with a primary ptfe insulation, metal braid and fluoropolymer outer jacket. Each length of heating cables hc3ex-hc3 requires termination kits with cold lead for power connection

We are offering heated hoses (for gas and liquid transfer) heated hoses are needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature during gas analyzer sampling, hot melt transfer, petroleum or chemical transfers and food processing. These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids. heated hoses construction heated hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.

We offer Heat Tracers Thermotrace. Thermopads FTT are the most robust heat tracers for heating contents of pipelines, storage tanks & accessories in process industries like oil & gas, petrochemical, power, chemicals & fertilizers, metallurgy, cement, pharmacy, food and edible oils. . FTT is an alternate to Thermotrace CTL, where pipeline lengths and layouts are frozen and hence required lengths of heat tracers could be predetermined. Construction Thermotrace FTT is a constant wattage, Series type heat tracers consisting of "Go and Return" multistrand heating elements insulated with PTFE. The entire tracer is Stainless Steel wire braided for mechanical protection and earth continuity. The heating element terminates on cold leads with suitable gland connections. An outer jacket is offered as an option for corrosive atmospheres

We offer Thermotrace CTL Electrical Heat Tracers. Thermotrace CTL Electrical Heat Tracers are the apt solution to maintain product temperature inside Vessels, Tanks, Pipeline or Equipments. Thermotrace CTL keeps viscous fluids in flow state avoiding choking of pipelines. Thermotrace CTL PT (PTFE insulated), CTL SR (Silicon Rubber insulated) is positioned to serve virtually in every process industry - Oil & Gas, Petrochemical, Power, Chemicals & Fertilizers, Metallurgical, Cement, Pharma, Food and Edible oil industries. Thermotrace CTL-ZH (Polyolefin insulated) finds application for freeze protection in commercial and industrial Segments. Heat Tracers Cut to Lenth Construction Thermotrace CTL is a constant wattage, parallel circuit heat tracer comprising twin parallel bus wires of multistrand copper. These are insulated with PTFE or Silicon Rubber or LSZH, depending on the temperature application. Heating Element is wound spirally around the insulated bus and connected alternatively to the bus wires at suitable intervals, forming parallel circuits. The tracer has an insulation sheath followed by metallic braiding for mechanical protection and earth continuity. An outer jacket is offered as an option for corrosive atmospheres

We are offering drum heaters (for 200 litre barrels) drum heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating. drum heaters construction drum heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The drum heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control panel incorporating thermostatic control is provided with the heaters.

We are offering hot melt hoses. The heated hoses feed the hot melt from the basic appliance to the applicator system, ensuring that the properties of the adhesive are preserved. The heated hoses are designed to last longer and guarantee a constant temperature over the full length to remain char free and prevent changes in the glue viscosity. The hot melt hoses are very flexible, can be laid out at will and serve to connect movable appliances systems.