Transformers Dealers in Kapra, Hyderabad

• Type: Any Type
• Shape: Sqeare Or Raitangle
• Application: Single Phase And Tree Fase Or Any
• Brand Name: U\E G B
• Phase: Singe Phase And Three Phese
• Place of Origin: Hyderabad,India

we are manufactere all type glass epoxy sheet bobins and insulletion components

• Brand Name: Servoshield
• Usage: Industrial
• Warranty: 3 Year
• Country of Origin: India
• Power: 10 Kva
• Phase: Three Phase
• Cooling Type: Dry Type/Air Cooled
• Coil Type: Copper
• Type of Isolation Transformers: Power Line Isolation Transformer
• Transformer Type: Isolation Transformer

We are the main supplier of this product.

Being a quality-conscious firm, we ensure that the offered products comply with the laid industry standards and are of supreme quality. Our organization has all the essential logistic resources and links to ensure on schedule delivery of order(s).   Features & Applications : It helps to reduce the loss of theft, leakage, obsolescence, etc. For metering / protective applications Suitable for Ac circuit as control sources for Electrical and Electronic equipments. Laminations of high quality silicon steel minimize the core losses and optimize performance. Each unit must pass rigid tests for turns ratio, insulation, continuity, and over potential.

Transformer stampings & strips V notch strips(Mitred Strips) for the transformers ranging from 16 KVA upto 1000 KVA + Strips ( with & without holes) .All materials made from PRIME raw materials and duly cut on Power Presses and the Dies used are Hi-Tech which ensures Best Quality Laminations are produced. All CRGO materials are Stress Relieved Annealed for lower Watt losses.

• Phase: Three Phase
• Frequency: 50 Hz
• Material: Copper
• Power: 20 kV
• Cooling Type: Dry Type
• Input Voltage: 440V
• Current: 25 Amp
• Usage/Application: For Amplifier
• Output Voltage: 150 V

• Condition: New
• Power Source: Electric
• Application: Industrial
• Type: Ignition Transformer
• Phase: Single Phase
• Country of Origin: India

saptam corporation is the stockist of synthetic thermic fluid oil, alltypes of oil/gas burners &thermax boiler, burner spares like sequence controllers, ignition transformer, photocells, ignition electrodes, fuel pumps, nozzles, blowerfans, diffuser plates, solenoid valves, burner motor, temperature sensors

• Type: Inverter Transformer
• Color: Grey
• Brand Name: SERVOMAX INDIA
• Condition: New
• Certfication: ISO 9001:2008 Certified
• Cooling System: Oil Cooled

description: subjected to rigorous and strict quality controls at every stage of manufacturing designed to meet latest national international standards like is, iec, ansi, bs, din, etc. wide range of transformers duly tested at central power research institute, bangalore quality assurance programme available  .

Tappings Switch Tappings from 5% to -5% in steps of 2.5% or 1.5% for HV variation or as per customer’s requirement On Load Tap Changer OLTC of 16 steps for HV variation from +5% to -15% in steps of 1.25% or as per Specific requirements. OLTC for remote Autoparallel operation can also be offered.

• Frequency: 5Kilo cycles to 500Kilo cycles.
• Features: To reduce the high frequency losses (Eddy current) core material used very thin amorphous, Nano crystalline and ferrite cores, To reduce the leakage suitable winding techniques are used.
• Range: 1VA TO 50KVA
• Voltages: Primary up to 1200V To Secondary 1200V
• Di-Electric Strength: 100V to 3.5KV AC.
• Application: DC To DC converters (Buck Boost and SMPS Transformers)

This higher current affects the electrical motors (particularly smaller capacity motors upto 7.5 H.P.) in three ways: 1. Higher current produces higher losses in electrical motors which causes premature failure of winding. 2. These higher losses of electric motors also increase the losses of cables, switches, transformers & other associated equipment. 3. For smooth continuous operation of motors, over load relays are usually set at 20% higher setting.

Tappings Switch Tappings from 5% to -5% in steps of 2.5% or 1.5% for HV variation or as per customer’s requirement On Load Tap Changer OLTC of 16 steps for HV variation from +5% to -15% in steps of 1.25% or as per Specific requirements. OLTC for remote Autoparallel operation can also be offered.

Servomax has a wide range of isolation transformers which reduce the effects of power line problems like noise, spikes, surges, transients and neutral, to a minimum.

We supply ignition transformer for igniting diesel, furnace oil and gas are available with us in ex-stock.

We manufacture a wide range of isolation transformers, which are commonly used to decouple two circuits. Our transformers are designed with careful attention to capacitive coupling between the two windings i.e. Input and output windings. We make sure that high quality raw material is used while manufacturing the transformer. We manufacture transformer using symmetrical windings. Widely used in : computer installationslaboratory instrumentscell phone networkstextile machinerybio medical equipment features : eliminates noise, spikes, surges and transientsprovide flux pathsexcellent quality powerhigh capacity to alter frequency technical specifications : inputoutput415vac3ph415vac3ph415vac3ph220vac3ph230vaclph230vac3ph230vaclph110vac1ph specifications : construction standardsasper is2026 part i&llsystem connectionsdelta/star, star/delta, star/starratios1:1 and 2:1regulationbetter than 3.5%powerfactor0.75 lead to 0.75 lagdi-electric strength3 kv for 60 secinsulation resistancebetter than l000 mega ohmscoupling capacitance0.01pf for l00 dbleakage currentlessthan 20 microarnpscommon mode attenuation100db/120dbtype of executionclosed typeoperating temperature0 c to 45 ctype of coolingnatural air/forced air/oil cooled

Multiple Shielding Techniques employed to reduce the inter winding capacitance to below 0.005 picofarad and increases DC Isolation to over 1000 Megaohms. Technically any transformer that has no direct current path between its primary & secondary windings provides isolation from any kind of leakage in Current, Spikes/Surges produced in the system. Provision of electrostatic shield in between primary & secondary winding depends upon its construction, specification & performance characteristics. Isolation / Ultra Isolation Transformer are being used to protect Electronic & Sophisticated equipments, CNC Machines from the excessive line voltage transients, spikes / surges produced in the system. Electrostatic shielding helps in grounding these spikes & not allowing to pass on to the secondary side of the transformer. Furnace Transformer are built in delta / star connection with neutral as floating & electrostatic shielding is used to protect the furnace from any kind of Earth Fault Tripping.

• Color: Black, Grey, Brown, White, Yellow
• Condition: New, Used
• Feature: Durable, Easy To Use, Rust Proof
• Finishing: Polished
• Packaging Type: Box, Packet
• Voltage: 0-110 V, 110-220 V, 220-440 V

We are the main supplier of this product.

Three Phase Transformers, step down transformers, Control Panel Transformers

We are offering servo transformers from india.

r core transformer, apd transformer, radiomast transformers., Transformers