Universal Testing Machine Dealers in Hyderabad

Features Load Capacities 50kN to 600kN static & dynamic Frame stiffness 1100kN/mm Up to 300 mm stroke servo hydraulic actuators with 1micron resolution Works out of 3 Ǿ 415 VAC Next generation DSP based servo controller with 32 bit data acquisition 24 kHz data acqusition & 24 kHz servo loop control Accuracy ± 0.5% of read out value for load, strain & stroke 0-100 Hz cyclic frequency operation. Frequency response depends on combination of power pack & servo valve flow rate Noiseless operation Power pack rating 11 LPM to 500 LPM Applications Tension/Compression/3 point bend Ductile and Brittle Fracture toughness (K1c, J1c, CTOD, J-R) Fatigue crack propagation (da/dN) Threshold stress intensity Low-Cycle/High-Cycle Fatigue (LCF/HCF) Elastomeric properties

Variety of tests like Tension, Compression, Transverse, etc are conducted. Continuous roll autographic “Load Vs Elongation” recorder. Suitable for testing a wide range of metallic materials.   Extra (Optional) Accessories such as - Extensometer, Pace (load) rate control, Load-Stabilizer, Attachment for - Brinell test, Tensile test for shouldered & threaded, Single & Double shear test, Bolts-Nuts & Washer test, Rope test, Flat Belt test, Bend-Rebend test, 180° Bend test, Pull-Out test, Chain testing, etc are available. Various Models - Capacities from 100 kN to 2000 kN are available. Loading accuracy well within ± 1%, conform to IS:1828 / BS:1610.

• Brand Name: FSA, FIE, krystal Equipments
• Function Type: Semi Automatic
• Feature: High Accuracy and repeatability
• Capacity: 100 KN, 200 KN, 400 KN, 600 KN, 1000 KN, 2000 KN & 3000 KN
•  :  

• Length: 25 mm & 50 mm
• Diameter: 0.5 to 30 mm
• Thickness: up to 30 mm
• Width: up to 30 mm

This machine is used to test the tensile and compressive properties of material. The reason Universal Testing machine is named so because it can perform all the tests right from compression, bending to tension and examine the material in all mechanical properties. We offer these in grade of 10T, 20T, 40T, 60T and 100T. Accuracy & Calibration All Mechatronic Control System’s Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every Machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in British Standards 1610: 1964 and IS: 1828-1975. Mechatronic Control System’s Universal Testing Machines Comply with grade “A” of BS : 1610 : 1964 and grade 1.0 of IS -1828-1975 An accuracy of + 1 % is guaranteed from 20% of the load range selected to full load. Bellow 20% of the selected range, the maximum permissible error is 0.2% of the full reading.

universal material testing machine

universal testing machinery, auto levels, Total Station, Digital Theodolite

Electrical Universal Testing Machine, Frequency Response Analyzer, Gm Counter