V-Guard Voltage Stabilizers Dealers in Nacharam, Hyderabad

• With Relay / Contactor: High Voltage Protection, Low Voltage Protection
• With Mcb: Overload Protection,Short Circuit Protection
• Input Voltage Range: 170-270v Ac, 50 Hz
• Output Voltage: 230v Ac 50 Hz 1phase
• operating frequency: 47 to 53 hz
• Output Regulation: + 1%
• Correction Speed: 35vsec
• Line Regulation: + 1%
• Load Regulation: + 1%
• Wave-form Distortion: Nil
• Power Factor Effect: Nil
• Output Wave -form: True Reproduction of Input
• Type of Cooling: Natural
• Air-cooled System Construction: As per is – 9815
• Efficiency: 98.5% Response Time – 10 Milli Sec
• Servo Motor Drive: Rugged Ac Step Synchronous Motor Enclosure – Ip32 Indication On Front Panel
• Input On Output On Output Cut: Off
• Input Low Input High: 0-300 V 72 Sq. Mm Analog Meter to Read Output Voltage Output Connection
• Sockets: 1 & 2 Kva
• Connectors: 3 Kva To10 Kva
• Nut & Bolt Termination: Above 10 Kva
• Indication On Front Panel: Input On Output On Output Cut-off Input Low Input High 0-300 V 72 Sq. Mm Analog Meter to Read Output
• Input Connection: 1 & 2 Kva – Power Card with Plug Top 3 Kva To10 Kva with Connectors Above 10 Kva Nut & Bolt Ter
• Output Connection: 1 & 2 Kva – Sockets 3 Kva To10 Kva with Connectors Above 10 Kva Nut & Bolt Termination

We are engaged in manufacturing high quality Electronic Voltage Stabilizer that quickly response for fluctuation in line and load. Our Stabilizer takes approximately 5 cycles for change in load and 10 cycles in the change of line. Operating Principle Our regulators ensure controlled firing through inverse parallel pair of SCR’s measured in shunt leg of auto transformers. The approximate voltage obtained when auto-transformer increases or decreases from the input voltage, which depends on the phase angle from where the SCR is fired. Output folds back when current exceeds. Technical Specifications Single Phase 1kVA – 50kVAThree Phase 3kVA – 300kVA Models in Three Phase Models Have Line to Neutral Voltage control for UN-balance LoadsHave Line to Line Voltage control for Balanced Loads Features Robust ConstructionPerfect handling of voltage fluctuationsWithstand operational temperatureLow maintenance requiredLong functional lifeCost effective Applicable in NC MachinesComputersXerox MachinesMedical EquipmentOil and Gas PipelinesDefense Lab EquipmentNavigationsX Ray UnitTelecommunication Test Instrument

• input voltage range: 170-270v ac, 50 hz
• output voltage: 230v ac 50 hz 1phase
• operating frequency: 47 to 53 hz
• output regulation: 1.00%
• correction speed: 35vsec
• line regulation: 1.00%
• load regulation: 1.00%
• wave-form distortion: nil
• power factor effect: nil
• output wave -form: true reproduction of input
• type of cooling: natural
• air-cooled system construction: as per is – 9815
• efficiency: 98.5% response time – 10 milli sec
• Servo motor drive: rugged ac step synchronous motor enclosure – ip32 indication on front panel
• input on output on output cut: off
• input low input high: 0-300 v 72 sq. Mm analog meter to read output voltage output connection
• sockets: 1 & 2 kva
• connectors: 3 kva to10 kva
• nut & bolt termination: above 10 kva

Voltage Stabilizers, Transformers

Voltage Stabilizers, Automatic Voltage Stabilizers, Isolation Transformers

Auto Tap Transformer, inverter transformer, K Rated Transformer, Line Filter

Voltage Stabilizers, Uninterrupted Power Supply, Inverters

Voltage Stabilizers, Transformers, energy saving equipment