Control Valves Dealers in Hyderabad

Flow Control Valves that we offer regulate the flow or pressure of a fluid. Flow Control Valves, offered by us, normally respond to signals generated by independent devices such as flow meters or temperature gauges. Our Flow Control Valves are normally fitted with actuators and positioners. Pneumatically-actuated globe valves and diaphragm valves are widely used for control purposes in many industries, although quarter-turn types such as (modified) ball, gate and butterfly valves are also used.Flow Control Valves, offered by us, can also work with hydraulic actuators (also known as hydraulic pilots). These types of valves are also known as Automatic Control Valves. The hydraulic actuators will respond to changes of pressure or flow and will open/close the valve. Automatic Control Valves do not require an external power source, meaning that the fluid pressure is enough to open and close the valve. Automatic control valves include: pressure reducing valves, flow control valves, back-pressure sustaining valves, altitude valves, and relief valves. An altitude valve controls the level of a tank. The altitude valve will remain open while the tank is not full and it will close when the tanks reaches its maximum level. The opening and closing of the valve requires no external power source (electric, pneumatic, or man power), it is done automatically, hence its name.Process plants consist of hundreds, or even thousands, of control loops all networked together to produce a product to be offered for sale. Each of these control loops is designed to keep some important process variable such as pressure, flow, level, temperature, etc. within a required operating range to ensure the quality of the end product. Each of these loops receives and internally creates disturbances that detrimentally affect the process variable, and interaction from other loops in the network provides disturbances that influence the process variable. To reduce the effect of these load disturbances, sensors and transmitters collect information about the process variable and its relationship to some desired set point. A controller, then processes this information and decides what must be done to get the process variable back to where it should be after a load disturbance occurs. When all the measuring, comparing, and calculating are done, some type of final control element must implement the strategy selected by the controller. The most common final control element in the process control industries is the Flow Control Valve. Flow Control Valves manipulate a flowing fluid, such as gas, steam, water, or chemical compounds, to compensate for the load disturbance and keep the regulated process variable as close as possible to the desired set point.

Control valve with own-medium control for the regulation of pressure and flow rates in service areas without external power supply. Long service life due to the hard-faced and thus wear-resistant, corrosion- and infiltration-proof seat. Suitable for use in water distribution applications and in pressure management.

• Material: Mild Steel
• Finishing: Powder Coated
• Fluid Media: Air, Water
• Pressure: 2 - 10 Bar
• Size: 100-2000mm

Low pressure drop reduced heat loss and increased efficiency. compact five annuli body design. wide variety of spool types including detent, and interchangeable spools and bodies.

steam valves for steam application .

We are offering control valve. Batch mixers

• Type: SinglePort 2Way
• Model No: Flanged150# to 1500#
• Size: 1/2' to 12'
• Body: Cast carbon Steel/ss
• Pressure: 2 to 80 Bar
• Actuator: Diaphragm,cylinder,electric

1. high pressure ball valve 2. manifold mounting ball valve 3. 3 way ball valves 4. 4 way ball valves 5. flow control valve with check valve 6. manifold mounting flow control valve with check valve 7. flow control valve without check valve 8. manifold mounting flow control valve without check valve 9. non return valves 10. manifold mounting non return valve 11. needle valves 12. shut off valve 13. check valves 14. diverter valve.

We are one of the prominent names engaged in manufacturing and supplying Single Headed Hydrant Valve. The Single Headed Hydrant Valve is greatly demanded for its smooth surface finish and precise design. Single Headed Hydrant Valve also exhibit high tensile strength, creep strength and weatherability. We offer Single Headed Hydrant Valve in different specifications.

• Usage/Application: Industrial
• Brand Name: Atos
• Power: Hydraulic

Parallel work sections with individual load ports • Open center, closed center and power beyond applications. • Spring center is standard. detent options on customer requests. • Work port relief valves and anticavitation check valves are available • Spool ends with caps. Lever end protected from dust by bellow • Inlet & Outlet ports with threading options for UNF, BSP, NPTF. • Load check valves for all spools to prevent back flow from pump • Work Port Relief valve provision to limit the pressure in each spool section

water valves, FILMS, Thermostat, Relay, Thermostats, Relays, Water Valve

Directional Control Valves, Needle Valves, vane motors

fluid control valves

linear valve, Onion, Green Chilli, Engine Valves, corriander leaves

direction control valves, Air Compressors, Pu Tubes, gas booster

V4do1 v4do2 v4do6 series size max. Flow max. Pressure mounting options in mm gpm lpm psi bar v4do1 14" 6 24 90 5000 350 subplate v4do2 38" 10 32 120 4600 315 subplate v4do3 58" 16 80 300 5000 350 subplate v4do6 34" 20 185 700 5000 350 subplate v3do6 34" 20 132 500 5000 350 subplate

electric butterfly valve, Motorised Butterfly Valve