deetee industries ltd Nand Nagar, indore, Madhya Pradesh

sawing is particularly advisable when clean cutting is to be performed. Circular saw blades are used generally to perform such clean cutting using a friction saw blades. Dee tee friction Saw Blades are designed for High Speed Cutting. These saw are manufactured from Chrome vanadium (Cr-V) Steel, 1.2235, with maximum stability at surface on 60-90 meter per second.Circular saw blades Friction Saw operation is based on the strength of the frictional heat which is generated between the saw teeth.& work piece when the saw runs at high speed, Cr-V steel retains its toughness & has ability to resist the stress of high operating speeds. The most suitable hardness is 40-44 HRC. Circular saw blades friction saw edge retention quality is ensured by closely controlled heat treatment. Circular Saw blades Friction Saw is used to cut aluminum, non ferrous metals, plastics etc, Higher speed of (80-120) mtssecond is recommended.

SHEAR KNIVES & BLADES - DeeTee will make the difference in your production shearing operation. You'll get optimum performance and extended blade life resulting in more tons per edge. You will also get higher productivity as machine downtime for blade changes is significantly reduced. DeeTee manufactures Shear Blades up to 3500 mm length. Shear Blades are manufactured for both hot and cold operations and are available to shear foils as thin as .2 mm and billets as thick as 100 mm.

Sendzimir Mill Cluster Mill Rolls, 20 Hi Mill Rolls comprises of Work Rolls , 1st intermediate rolls,2nd intermediate rolls,Z hi Mill rolls, and back-up bearings. work rolls are very small in diameter. work rolls are generally made out of D2 1.2379 or HSS material. The 1st and 2nd intermediate rolls are made from 1.2362 H11 D2 material. Since all these grades come under the category of tool steels , they are heat-treated in salt bath furnaces. Salt bath treatment gives excellent uniformity of hardness and is considered to be the best method for tool steel hardening. Sendzimir mills are generally used for rolling of stainless steel and non-ferrous grades worldwide. these mills operate at speeds ranging from 500 MPM to 1000MPM. At such high speeds, it is very necessary that the material of rolls is very cle

Rubber Rings and rubber spacers are manufactured by Dee Tee Industries which are a common component used in slitting line tooling set up. Premium quality, high precision, durable and long lasting are adjectives that best describe the products manufactured at Dee Tee Industries. An epitome of perfection, our company has always striven to provide only the best to its clients ever since our establishment i The usage of prime quality spacers wich can be metal spacers and rubber spacer directly effect the maintenance cost and the life of the cutting knives in the slitting tooling

DeeTee’s R.M.R division is accredited with ISO-9001:2008 certificate. DeeTee rolls out world class forged rolls- Sendzimir mill rolls cluster mill rolls, 6Hi, 4Hi and 2Hi mill rolls, skin-pass rolls etc. The rolls are prone to very tough working conditions and have to be perfect in terms of wear resistance, toughness and hardness. Right from the raw-material inspection, to heat treatment ,to grinding and final dispatch, all rolls undergo very stringent quality checks. The raw-material is generally imported from renowned sources from worldwide and is checked for – macro structure analysis, micro structure analysis, ultrasonic soundness and heat-treatment response. Proper heat-treatment cycles ensure hardness uniformity and proper depth of hardness.Hardness by Rockwell and equotip hardness testers.

Roll designing is a very critical stage as it affects the cost of the rolls, life of the rolls, productivity of the mill, and the quality of the tube section. DeeTee uses COPRA ( German) software for the roll designing. The customer has to provide only the basic details of the mill and the input and output details.Salt bath heat-treatment is considered to be the best for tool steels. The high-carbon-high-chromium grades are through hardening steels i.e. , when heat-treated they attain the hardness right from the outer surface till the inner core. Proper heat-treatment gives good toughness, wear resistance and uniform hardness to the rolls used in rod mill, tube mill, wire rod mills.

DeeTee will make the difference in your production shearing operation. You'll get optimum performance and extended blade life resulting in more tons per edge. You will also get higher productivity as machine downtime for blade changes is significantly reduced. DeeTee manufactures Shear Blades up to 3500 mm length. Shear Blades are manufactured for both hot and cold operations and are available to shear foils as thin as .2 mm and billets as thick as 100 mm.

friction saws are made from imported Chrome-Vanadium Steel and are wearshock resistant at high cutting speeds. Tooth profiles are obtained from Vollmer Machine of Germany. Friction Saws of OD 450, 510, 600, 710 and bore 35 mm are available off the shelf. Friction saw operation is based on strength of the frictional heat, which is generated between saw teeth and work piece when the saw runs at high speed. Cr-V steels retains its toughness and has ability to resist the stress of high operating speeds (60 - 90 meter per second). Saw should be mounted true and should not run out.

The rolls are prone to very tough working conditions and have to be perfect in terms of wear resistance, toughness and hardness. Right from the raw-material inspection, to heat treatment ,to grinding and final dispatch, all rolls undergo very stringent quality checks. The raw-material is generally imported from renowned sources from worldwide and is checked for – macro structure analysis, micro structure analysis, ultrasonic soundness and heat-treatment response. Proper heat-treatment cycles ensure hardness uniformity and proper depth of hardness.

Manufacturer And Supplier of circular cutting saw which is also termed as flying saw blades. We manufacturer high quality saw blades for all Metal Circular Cutter cutting solutions. We are a leading manufacturer in india for Circular saw cutting blades. WE are exporting cutting tools to over 42 countries across the globe.

The rolls are prone to very tough working conditions and have to be perfect in terms of wear resistance, toughness and hardness. Right from the raw-material inspection, to heat treatment ,to grinding and final dispatch, all rolls undergo very stringent quality checks. Surface hair-line cracks by magnetic particle testing, Sub-surface defects like inclusions by ultrasonic testing with the help of angular probes.

DeeTee’s friction saws are made from imported Chrome-Vanadium Steel and are wearshock resistant at high cutting speeds. Tooth profiles are obtained from Vollmer Machine of Germany. Friction Saws of OD 450, 510, 600, 710 and bore 35 mm are available off the shelf. Friction saw operation is based on strength of the frictional heat, which is generated between saw teeth and work piece when the saw runs at high speed. Cr-V steels retains its toughness and has ability to resist the stress of high operating speeds (60 - 90 meter per second). Saw should be mounted true and should not run out.

SHEAR KNIVES & BLADES are manufactured from best quality alloy steel. Information on specific application of blades is to be provided by the customer. Raw material is selected by DeeTee and heat treatment is imparted in accordance with the specifics application to maximize the blade performance. The shear blades are finally ground to close tolerance so that they conform to most rigorous international standards about parallelism and flatness.