Electrical Components Dealers in Ujjain Road, Indore

• temperatures: 25 °C.

DC electronic loads manufactured microchannel water-cooled heatsinks, the WRx Series addresses high power DC applications where exhaust heat control is essential. The WRx Series greatly increases power density compared air-cooled alternatives. An integrated solenoid controls the flow of water to avoid condensation. Full power can be achieved using conventional water, with water inlet temperatures up to 25 °C.

• Maximum Power: 15 kW
• Maximum Voltage: 200 Vdc

15 kW to 120 kW+ Water Cooled Active Resistance DC Electronic Load, MagnaLINK™ Distributed DSP Architecture, 16-bit digital programming and monitoring resolution, Many control modes, including: voltage, current, power, resistance, Integrated front and rear full control (host) USB ports, RS485, and dual MagnaLINK™ ports, with LXI TCPIP Ethernet and IEEE-488 GPIB available.Integrated arbitrary waveforms with up to 100 steps per stored function1

Product Description The DL3000 is a cost-effective programmable DC Electronic Loads with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes. Product Features Dynamic Load Performance and Visualization Up to 5 A/us slew rate and 30 KHz dynamic loading High resolution and accuracy on voltage and current load conditions 3 Built in application setups for battery testing or Current or Power optimization Free UltraLoad Software for remote operation and monitoring

The DL3000 is a cost-effective programmable DC Electronic Load with performance specifications that rival any instrument in its class. With a user-friendly interface including graphical charting, the DL3000 series provides various interfaces for remote communication to meet your diversified test requirements. Test power systems and batteries with configurable static, transient, and advanced application modes. Product Features Dynamic Load Performance and Visualization Up to 5 Aus slew rate and 30 KHz dynamic loading High resolution and accuracy on voltage and current load conditions 3 Built in application setups for battery testing or Current or Power optimization Free UltraLoad Software for remote operation and monitoring

At first, the NI 333 looks like a normal current clamp. Nevertheless, the special integrated technique of the jaw enables the user to measure very low or differential currents. The NI 333 is designed with an ergonomic housing with a wide jaw (opening). With this jaw, conductors up to 30 mm can be measured easily. The jaw of the clamp is very sensitive, yet very well isolated. This enables the user to measure not only within the standard frequency of 5060 Hz, but also at higher frequencies. In order to filter the disturbance of high frequencies, a special filter has been developed. This widens the range from 40 Hz up to 1 kHz. All measured values are displayed on the LCD screen.

• Features: Dimensional accuracy,Perfect design,Flawless finish

• Item Code: NI-333

At first, the NI 333 looks like a normal current clamp. Nevertheless, the special integrated technique of the jaw enables the user to measure very low or differential currents. The NI 333 is designed with an ergonomic housing with a wide jaw (opening). With this jaw, conductors up to 30 mm can be measured easily. The jaw of the clamp is very sensitive, yet very well isolated. This enables the user to measure not only within the standard frequency of 50/60 Hz, but also at higher frequencies. In order to filter the disturbance of high frequencies, a special filter has been developed. This widens the range from 40 Hz up to 1 kHz. All measured values are displayed on the LCD screen. Features of the NI 333 Auto Power Off Data Hold High accuracy Relative measurement Wristband Including: Bag Test leads Manual Batteries

Nvis 726 AC/DC Load is an important device in all the Electrical laboratories. One can connect a load upto 1.2KW using this product. The device comes with On Board Switches, so that one can vary the load as required, in steps of 100W. The product is designed so as to provide load for various experiments of Transformer, Motors, Generators etc. Product Features Exclusive and rugged designed panel Stand alone operation Designed by considering all the safety precautions Online Product Tutotial

Electric Pole Clamp

Copper Cathodes

Electrical Testing Equipment, Scientific Sm5011a Digital Multimeter

Digital Electronics Lab, Mechanical Engineering Models, DC Electronics Lab

Electrical Equipment, Electrical Components

Welding Electrodes, Transformer, Wire, Cable

Electrical Fittings, electrical fixtures, mirror optic cfl luminaires

Electrical Equipment, Electrical Goods