Hand Tool Dealers in Nand Nagar, Indore

• Length: +/- 0.5 mm upto 500 mm.
• Bearing Seat: K-6
• Ground Tolerance: Within 0.025 mm.
• Fillet Radius: 1 to 3 R.
• Keyway Width: Within 0.1 mm.
• Keyway Depth: Within 0.2 mm.
•  :  

Leading Manufacturer of Shafts And Arbors I. Shafts are the machine members, mostly cylindrical in cross-section, which support the revolving parts of a machine, such as pulley, gear, fly-wheel, etc. Shaft not only supports a revolving part but also transmits torque. As a result, the shaft is subjected to bending as well as torsional stresses.II. In a good quality shaft the following properties are desired:1. Sufficient Strength.2. Low sensitivity to stress concentration.3. Ability to withstand head and case hardening treatment.4. Good machinability.5. High degree of toughness and wear resistance.III. After hardening, shafts are accurately ground and sometimes chrome plated as per requirement. Excellent geometrical accuracy and surface quality guarantee optimum running characteristics.IV. DeeTee manufactures shafts for Tube Mill, Section Mills, Special Purpose Textile Machine, Packaging Machinery, Printing Machine, Gear Boxes and various applications.V. The most common raw material for shaft is EN-24, EN-19 & sometimes En-31. These shafts are induction hardened to keep the skin hard & the core remains soft to absorb bending & torsion loads. Manufacturing Tolerance For Shaft:Bearing Seat : K-6Length : +/- 0.5 mm upto 500 mm.: +/-1.0 mm beyond 500 mm length.Fillet Radius : 1 to 3 R.Keyway Width : Within 0.1 mm.Keyway Depth : Within 0.2 mm.Ground Tolerance : Within 0.025 mm.Shafts usually fails due to fatigue, which arises due to:1. Presence of cyclic loads.2. Stress concentration which may be due to operation, like Keyway.3. Wrong alignment of bearings, drilled holes, etc.   DeeTee Shafts  Safe Production, Sure Operation   Keyword : rolling mill shaft, Cluster mill shaft, Cluster Rolling Mill arbors, 2 Hi mill Roll shaft,  Z Hi roll shaft, shafts for Tube Mill, Section Mills shaft, Textile Machine shaft,Packaging Machinery shaft, Printing Machine shaft, Gear Boxes shaft

• Material: Metal
• Shape: Rectangular
• Application: Garage
• Color: Available in many colors
• Finishing: Polished
• Feature: Good Strength, Long Life, Non Breakable
• Size: Standard

We do manufacture Tool Kit Boxes as per customer requirement. Packaging options differs as per the item to be stored inside. ranging from a smallest sim-card and memory card set to a bigger choclate and shoe boxes, we have an exhaustive range of various plastic box's in color and transparent material.

We offer swivel angle plates. Work can be quickly and correctly set at any angle with these adjustable swivel angle plates. They are graduated for setting 0 – 90° and can be easily adjusted manually and locked in adjusted position by means of two locking nuts. For setting purposes, a degree scale, reading minimum one degree, is graduated on the boss itself. This ensures better setting accuracy. The swivelling face in the swivel angle plates is provided with t-slots machined from solid. Other face is provided with as cast cored slots for clamping the angle plate on machine table.

• Material: Carbon Steel
• Usage/Application: Industrial
• Size: 200 mm
• Weight: 0.426 kg
• LENGTH: 250 mm

Work can be quickly and correctly set at any angle with these adjustable swivel angle plates. They are graduated for setting 0 – 90° and can be easily adjusted manually and locked in adjusted position by means of two locking nuts. For setting purposes, a degree scale, reading minimum one degree, is graduated on the boss itself. This ensures better setting accuracy.The swivelling face in the swivel angle plates is provided with T-slots machined from solid. Other face is provided with as cast cored slots for clamping the angle plate on machine table. Salient Features Made from close grained plain cast iron conforming to grade FG 220 of IS 210 (equivalent to GG20 / FT20 / 30-A). Higher grades also offered on request. Castings stress relieved to relieve internal stresses. Working faces flat within 0.015 mm per 300 mm and square and parallel within +/- 0.05 mm per 300 mm in two extreme positions. Edges parallel and square within 0.05 mm per 300 mm T-slots parallel to the edges within 0.05 mm per 300 mm Offered in sizes as shown in the table.

• Material: MS
• Type: For 40 NB Pipe
• Surface Type: Color Galvanized
• Structure: Spring Clamp
• Usage: Pipe Clamp

• Length :: +/- 0.5 mm upto 500 mm.
• Fillet Radius :: 1 to 3 R.

I. Shafts are the machine members, mostly cylindrical in cross-section, which support the revolving parts of a machine, such as pulley, gear, fly-wheel, etc. Shaft not only supports a revolving part but also transmits torque. As a result, the shaft is subjected to bending as well as torsional stresses. II. In a good quality shaft the following properties are desired: 1. Sufficient Strength. 2. Low sensitivity to stress concentration. 3. Ability to withstand head and case hardening treatment. 4. Good machinability. 5. High degree of toughness and wear resistance. III. After hardening, shafts are accurately ground and sometimes chrome plated as per requirement. Excellent geometrical accuracy and surface quality guarantee optimum running characteristics. IV. DeeTee manufactures shafts for Tube Mill, Section Mills, Special Purpose Textile Machine, Packaging Machinery, Printing Machine, Gear Boxes and various applications. V. The most common raw material for shaft is EN-24, EN-19 & sometimes En-31. These shafts are induction hardened to keep the skin hard & the core remains soft to absorb bending & torsion loads.

Get in touch with us to acquire the finest range of Seed Drills. We are bracketed among the eminent Manufacturers and Suppliers of the Seed Drill from Madhya Pradesh, India. Available in varied specifications, these Seed Drills & Seed Cum Fertilizer Drills can be customized according to the varied preferences of the clients. Moreover, these easy-to-operate and highly-efficient Seed Drills are nominally priced by us.More About Seed Drill : Seed drill is a sowing device that positions seeds in the soil and then covers them. The seed drill sows the seeds at equal distances and proper depth. This ensures that the seeds also get covered with soil. This saves them from being eaten by birds. Before the introduction of the seed drill, the common practice was to plant seeds by hand. Besides being wasteful, planting was very imprecise and led to a poor distribution of seeds.

• Type: Stripping Tools
• Country of Origin: India
• Brand Name: smartpack

acme screw, Lead Screw, trapezoidal thread screw

• Material: Plastic, Iron
• Size: 7 inch
• Weight: 100 grams
• Features: Premium quality, Sharper teeth

Hydraulic Shear, Hydraulic Lift, Hydraulic Pump

nc hydraulic shears, Hydraulic Press Brakes, Hydraulic Cnc Press Brake

• Type: Telescopic Extension Pole
• Features: Light and solid telescopic poles, Easy cleaning ofhard to reach areas, Snap-in threaded, nyloncone is included.

• Shape: Round
• Material: Stainless Steel
• Type: Horizontal
• Length: 1 m
• Capacity: 1 tph
• Usage/Application: Industrial

• Brand Name: Deepak gourav gears

We offer 3 start woram shaft.

Heavy Wall Thickness Seamless Pipe, EN8 Steel Plate, MS Bright Hex Bar

Pipe Notching Tool

Toggle Bearing, Spring, Idler Roller, gunmetal pin, Conveyor Belt

Radial Drill Machine, Lathe Machine, Shaper Machine