Level Switches Dealers in Indore

Level switches available for liquid and solid both the applications. Output spdt relay or pnp available on request.

The vibrating fork level switches are specifically designed for sensing the presence of low-density dry powders or fine granular solids in bunkers and silos. It’s stainless steel symmetrical fork offers reliable operation with even very low-density materials. The operation of the instruments is unaffected by parameters such as changing material composition, changing moisture content and low specific gravity. application examples dry powders – cement, pulverized coal, coffee powder, milk powder, chemical powder fine grained solids – food grains, plastic pellets, wood.

• Warranty: 6 Months
• Usage: RO
• Max. Voltage: 230VDC
• Frequency: 50HZ
• Condition: New
• Durability: Long Life
• Performance: Optimum

We are offering capacitance level switch. From past many years, we are engaged in offering excellent range of capacitance points level switch to our clients. In addition to this, client can get the provided products from us at very economical prices. applications: suitable for non-sticky liquids and solids. Suitable for side as well as top mounting. Single point/multi point/pump control switching on single probe. Minimum and maximum fail safe field selectable. Process temperature max 600 °c (ceramic insulation). Process pressure max. 20 bar. Ptfe coated for corrosive and conductive liquids. features: compact size. Universal industrial power supply (15 to 80 vdc & 15 to 265 vac). Low power consumption. Easy dip switch calibration. Customized process connections like threaded/flanged/hygienic etc.

• Min. Dielectric Constant: 1.6 (non-hygroscopic)
• Ambient Temp.: -20°C ... 70°C (-4°F ... 158 °F)
• Process Temp.: -20°C ... 100°C (-4°F ... 212°F)
• Extended Process PTFE Insulation Temperature: -30°C ... 250°C (-22 °F ... 482 °F)
• Extended Process Ceramic Insulation Temperature: -30°C ... 600°C (-22°F ... 1,112°F) (extensions & heat sinks required)
• Process Pressure: absolute / max. 15 bar
• Wetted Parts: SS-304, SS-316, SS-316L, PTFE, part ceramic
• Process Connection: NPT / BSP 1", 1¼", 1½", 2" etc Flanged : ANSI/JIS/DIN/ASA/custom
• Vibration Test: As per IEC 60068 part 2-6 sinusoidal, 10-55Hz, 0.15mm
• Probe Insertion Length: Rigid Rod - 50mm to 3,000mm, Flexible Rope - 100mm to 20,000mm

• Extension: Pipe GI / SS
• Housing: Pressure Die cast aluminium
• Type: Electronics top mounted with fork
• Power Consumption: 400 kW Maximum
• Fork Frequency: 150 - 350 Hz

• Cable Entry: 2 no. 1/2 inch BSP
• Power Supply: 18 -55V DC (optional 85 to 265 VAC 50/60Hz)
• Outputs: PNP-No. (optional SPDT potential free relay output)
• Max Load current: Non-Latching 120MA for PNP-No.

Vital vibrating fork is a compact level switch suitable for all kinds of free-flowing solids and grains. It is ideal for applications such as over-spilling and dry run detection. Vital is unaffected by spurious vibrations and is independent of the application material’s electrical properties. Vital can be made with a minimum of 1 1/4″ mounting and 100 mm tines. It comes with explosion-proof housings for applications of hazardous areas.

Slam series is an admittance based level switch with rf signal transmission between probe and evaluation unit via a co-axial cable with drain wire having driven shield arrangement to eliminate cable capacitance and drift due to change of cable capacitance with temperature.

Vibrating Fork Type Level Switches, High Rate Solid Contact Clarifiers

Level Switches, Level Transmitters

Malema LD60 / LD61 Vibrating Fork Type Level Switch