Low Tension Power Transformer
Get Price Quote
1 Piece (MOQ)
Mining Transformer Lighting Transformer Loading Transformer Furnace Transformer Auto Transformer Rectifier Transformer No of Phase Single Phase Three Phase Three Phase to single Phase Three Phase to Two Phase (Scott) Type of Transformer Double wound Transformer Auto wound Transformer Type of cooling Natural Air cooled Natural Oil cooled Salient Features Ranging from 12V to 660V at 50 Hz / 60 Hz Capacity:0.5 to 800 KVA Taps can be provided with OFF load Tap changer using links or Switch Conforms to IS : 2026 / IS : 11171 Class of insulation class B / F / H Efficiency better than 96% Regulation better than 5% Natural Air-cooled transformers are supplied in sheet steel ventilated case, with screwed top cover. Input and output terminals are provided on the top side of the transformer, inside the Terminal Box. Cable entry holes are provided on the bottom side of the Terminal Box. The transformers are suitable for floor mounting and are also supplied with M.S. Rollers for easy portability in case of large size transformers. Natural oil cooled transformers are supplied in M.S. tanks. In some cases, the tanks are provided with cooling radiators on two or all the four sides. As a standard practice, the tank is provided with oil fitting hole with cap, oil level indicator, drain plug, and earthing terminals. Input and output terminals are brought out generally on two opposite sides, either from the sides of the tanks or from the top of the tank. Plain unidirectional M.S. rollers are fitted on M.S. channels for base mounting. MARSZ also supplies transformers in open execution, without any enclosure, when they are to be mounted inside a control panel or a cubicle. The description given below are for single phase, three phase and three phase to single phase double wound transformers. It is valid only for double wound transformers and for phase voltage between 24 volts and 660 volts at a frequency of 50 Hz. For voltages beyond this range and for other frequencies will be made on request. In case of Auto Wound Transformers though the entire range falls within our regular manufacture, their details depend very much on the transformation ratio, in addition to the capacity. Therefore, special quotations should be obtained in individual cases. These include single phase and three phase Star-connected transformers, auto-boosters and off-load line voltage correcting transformers. SINGLE PHASE DOUBLE WOUND TRANSFORMERS As stated before, these are made in natural air-cooled construction or natural oil cooled construction. Extra off-load taps can be provided on request. The capacity of the transformer at the tap will be proportionately low corresponding to the tap voltage. The declared capacity will hold good only for the highest voltage on both input and output, unless the taps are specified as full capacity taps. THREE PHASE DOUBLE WOUND TRANSFORMERS These transformers are generally manufactured in Delta/Star or Star/Delta connections. However, transformers can also be supplied suitable for Delta/Delta or Star/Star or Open delta/Open delta connections on request against specific requirements. Enquiries or orders should clearly state the voltage and connection on the primary and secondary and whether the voltage are between phases or between phase and neutral. Extra off-load taps can be provided at extra cost. The capacity of the transformer at the tap will be proportionately reduced corresponding to the tap voltage, The declared capacity will hold good only for the highest voltage on both input and output unless the taps are specified at full capacity taps. THREE PHASE TO SINGLE PHASE DOUBLE WOUND TRANSFORMERS These transformers are very widely used where large single phase power is required. These are wound as open delta on the three phase input side and the windings on the secondary are connected in series for single phase output. This type of construction given an unbalance in the supply current. e.g. 10 KVA three phase to single phase transformer will have a current distribution as Phase A : 14.5 Amps, Phase B 29 Amp and Phase C: 14.5 Amp approximately when the supply voltage is 400 volts nominal. However, this unbalance is less severe than when a single phase load is connected between phase and neutral or between phase to phase.
Low Tension Current Transformer
600 - 1,800 Per Piece
10 Piece (MOQ)
Low tension current transformers mountable transformers used in Ring main units.
Best Deals from Low Tension Transformer
Dry Type Ac & Dc Low Tension Power Transformer
Get Price Quote
1 Piece (MOQ)
l t transformers
Get Price Quote
L T transformers the dielectric insulating fluid in the transformer tank is completely sealed and is in zero contact to the atmosphere. The design avoids air in the transformer tank thereby avoiding sludging and oxidation of the dielectric fluid.
lt transformers
Get Price Quote
We are counted among the distinguished L.T. Power Transformers Manufacturers In India. ME manufacture L.T Transformers in different types and capabilities to suit individual requirements. The leaflet describes following types Single Phase Double Wound Transformers Three Phase Double Wound Transformers. L.T. Current Transformers are manufactured both in natural air cooled construction and natural oil cooled construction. In addition to the above other types of transformers are i) Voltage Auto Transformers ii) Current Transformers. These are described in our various leaflets. Special Enquiries will always be entertained with promptness, by our Engineering and sales staff. The transformers described in this catalogue are made in natural air cooled and oil cooled construction, suitable for indoor use in a maximum ambient temperature of 45oC. The electrical performance of these transformers generally confirms to the requirements of I.S. specification No. I.S. 2026 for power Transformers. Natural Air Transformers are supplied in sheet steel ventilated case with screwed top cover. Input and output terminals are provided on the top of the transformer, inside the casing. The transformers are suitable for floor mounting and are also supplied with M.S. rollers for easy portability. Natural oil cooled transformers are supplied in M.S. Tanks. As a standard practice the tank is provided with oil filling hole with cap, oil level indicator drain plug and earthing terminal. Input and Output terminals are brought out generally on the top side of the tank. Extra off-load taps can be provided on request. The capacity of the transformer at the tap will be proportionately low corresponding to the tap voltage. The declared capacity will hold good only for the highest voltages on both input and output, unless the taps are specified as full capacity taps. Three Phase Double Wound Transformers. These generally are manufactured in Delta/Star or Star/Delta connections. Extra off-loads can be provided on request. A typical vector with winding connections is as shown below.
Low Tension Current Transformers
Get Price Quote
Low Tension Transformer
1,600 - 1,800 Per Piece
3 piece (MOQ)
Low Tension Standard Current Transformer
Get Price Quote
Ours is a well-recognized firm based in Vadodara(India) and appreciated for offering qualitative products and that too at the best market prices. We keep a stern check on the payment procedures that we sternly follow and apart from this, we make a completely secured database that lists all the payments made and clients' details. Rest assured us for the payments, as we use leading technologies for the same.
0.0
View Profile
HT & LT Transformer
Get Price Quote
We have gained a wide recognition in the market by offering a high-quality HT & LT Transformer to the clients. Our business is based in Delhi, India. Our adroit professionals precisely manufacture it by using the premium grade raw materials and modern techniques. We thoroughly examine it on various parameters of quality before forwarding it to the clients. Its hassle-free functioning and long service like make it a preferred choice of our patrons. Detail : We have emerged as one of foremost manufacturers, exporters, retailers and suppliers of superior quality range of HT/ LT Transformers. These are manufactured using high grade raw material and sophisticated technology in compliance with the set global norms. The offered transformer is stringently tested on various parameters so that no defective product ius delivered to clients. Apart from this, these can be availed in various specifications in order to cater the varied needs of clients. Moreover, our valuable clients can avail these transformers from us at industry leading prices. Features : Helpful in saving power Can protect the electrical equipment from breakdown Long lasting performance
0.0
View Profile
Low Tension Current Transformer
Get Price Quote
We are offering Low Tension Current Transformer. The company is engaged in the provision of high quality Low Tension Current Transformer. The range of low voltage current transformer is up to 1.1kv, indoor & outdoor (dry type). It is available in bar and ring type in epoxy resin cast and tape wound.
0.0
View Profile
Low Tension Current Transformers
Get Price Quote
We are offering low tension current tape wound current transformer.
l t transformers
Get Price Quote
A normal distribution transformer generally Steps-Down the voltage from H.T. to L.T., however it cannot take care of the fluctuating voltage and most of the times and at most of the sites, it has been realized that, the problem of fluctuating voltage remains, resulting in improper function of electrical systems. H.T. Transformer with Built In H.T. Automatic Voltage Stabilizer provides total solutions for voltage fluctuation and stabilization. The unit is basically a combination of H.T. Automatic Voltage Stabilizer and standard H.T. Distribution Transformer working in conjunction. These are available up to 5000 KVA in 11 KV & 33 KV Class.Standard transformers can correct limited voltage variations and cannot regulate the voltage in 'on load' condition. The only smart way to tackle this problem is by installing highly efficient RECONS H.T. Transformer with Built In H.T. Automatic Voltage Stabilizer. These systems can be used in various industrial and commercial applications.
0.0
View Profile
Low Tension Current Transformers
Get Price Quote
It transforms the high value current in primary circuit to low value current (1a / 5a) in secondary circuit in respective proportion. These are manufactured in tape wound, poylamide encapsulated and resin cast. We manufacture these for lt and ht application. We make available Low Tension Current Transformers in all standard ranges for different current rating, va Burden, different class of accuracy and different class of protection. We also manufacture cbct, differential ct, i ct, etc. We can manufacture cts as per customer demand.
Low Tension Transformer
Get Price Quote
We are the main supplier of this product.
Low Tension Ring Current Transformer
500 Per Piece
0.0
View Profile
Low Tension Power Transformers
Get Price Quote
We make sure the ranges of product we offer purchasers with are as per global quality management standards. Only after getting approval from the quality experts, we make use of the inputs sourced from the vendors. We make sure that our entire range is of excellent quality and faultless.
0.0
View Profile
Lt Transformer
10,000 - 90,000 Per Piece
1 piece (MOQ)
We are offering lt transformer. Cosmostat' l.t. Transformer is different type & capacities to suite individual requirement. Singlethere phase, autodouble wound, airoil cooled
0.0
View Profile
Lt Transformer
120,000 Per Piece
This is due to our cordial associations with the logistic companies that we are able to reach any preferred Noida(India) with ease, thus meeting the delivery schedule. We have developed a separate unit, necessary for making stock of the offerings. In addition to this, we maintain complete hygiene inside the unit. Features : Long operational life Sturdy design Low eddy current
0.0
View Profile
Low Tension Current Transformer
Get Price Quote
We have a team of efficient personnel who sternly check the raw materials before final procurement. Thus, we ensure a qualitative array of products at customer's end. We are here to guide our clients with the secure payment procedures. With us, the customers get convenience to pay through both online and offline payment methods Application :Fault current of the system Voltage of the system Any special features required CTs manufacture by us confirme to ISS 2705, BS 3938, and IEC 185-186 standards.
Low Tension Current Transformer
Get Price Quote
We are offering low tension current transformers l.t.c.t. Resin cast & tape wound upto 0.66 k.v.
0.0
View Profile
Post Free Ad
