Polypick Engineers Pvt Ltd M G Road, Indore, Madhya Pradesh

Wear strip must be made of such material which should not break, should not wear out quickly and protect the material above it. Further, anti-sticking and self-lubricating properties of UHMWPE makes it the most desired product to be used in wear strips.

UHMWPE Trolley wheels in virgin and commercial quality. Industrial trolleys are generally made to carry loads of material and the strength of it largely depends on load bearing capacity of wheels. There are industries, where need of chemical resistance is essential else wheels will be corroded very quickly. Further, frequent maintenance and replacement of wheels are also cumbersome. UHMWPE trolley wheels are the best material to work with in such critical environment. Its Low Wear, High Impact Strength and High Load bearing capacity makes it perfect solution of trolley wheels.

UHMWPE sheets of different sizes, colours and thickness. We have state of art hydraulic presses as per international standards. UHMW PE sheet of different molecular weight ranging from 4.0 Million to 9.2 Million. The colour code has been given to identify the quality of UHMW PE sheet. The Polytron UHMW PE sheet can also be made in desired colour prescribed by customer. UHMW PE sheet on the right have made it a very economical and better alternative to Stainless Steel and other metals.

Low wear and High Impact Strength makes the rods of UHMW PE so versatile that it can be used in any general engineering applications. The rollers, bushes, Circles or any application of such shapes can be made cost effective using POLYTRON UHMW PE Rods. Rods can be made by machining and through direct extrusion as well. Various colour options are available in varied diameter of rods.

There are many applications, where profiles must be wear resistant and should not break or crack. Applications, where replacement of part is very difficult and expensive, POLYTRON UHMWPE profile serves as a “peace of mind” solution. Wear strip must be made of such material which should not break, should not wear out quickly and protect the material above it. Further, anti-sticking and self-lubricating properties of UHMWPE makes it the most desired product to be used in wear strips

The pressure pads, made of Polytron UHMWPE, sustain the impact and do not wear despite the continuous flow of sheet on it. These pads avoid the metal to metal contact and do not allow generating any static charge. Extremely low coefficient of friction of POLYTRON UHMWPE pads, increase the life and eliminates the need of frequent replacement. Pressure pad is such a critical component that it will work only if UHMWPE sheet is made of best raw material and under the strict standard production parameter.

The excess inkwaterimpurityforeign particle from the smooth non-engraved portions of the image carrier. In simple words, these blades are used to clean the smoothexpensive moving surface. Either blade or the cylindrical partsurface which is to be cleaned would be in moving condition. The bladecylinder combination is designed such that it is the blade which wears away, not the cylinder. The blade should sacrifice itself to protect more expensive material. The scraping can be done using UHMWPE sheet where corrosion, chemical resistance is essential. Its low wear property gives significant life than metal scraper. It is also used where metal to metal contact has to be avoided.

UHMWPE Fenders A bumper used to keep boatsships from banging into docks or each other. The Most Corrosive water in the world which can corrode anything. Quite heavily loaded, generate very high impact if banged with any fender. UHMW PE Highly Resistant with Sea Water – UHMW PE Impact Strength is required, should not break or crack in case it bangs with shipboat – UHMW PE.

UHMW PE Vacuum Box Tops, Suction Tops, Foils and dewatering elements used in Paper, Asbestos and Cement Sheets. The wear of wire in Pulp and Paper Industries is a major challenge for paper technician. high quality of dewatering elements which saves the life of wire and give optimum life of itself. Continuous running beneath the wire requires highest co-efficient of friction and extremely low wear. Polytron uses various additives and different grades to suit the different requirement. Our G9 HD grade for dewatering elements is a popular name among paper mills. This is made of high quality UHMWPE along with various additives for improved performance for high speed machines.

We manufacture UHMWPE Trolley wheels in virgin and commercial quality. Industrial trolleys are generally made to carry loads of material and the strength of it largely depends on load bearing capacity of wheels. There are industries, where need of chemical resistance is essential else wheels will be corroded very quickly. Further, frequent maintenance and replacement of wheels are also cumbersome.

We manufacture UHMWPE sheets of different sizes, colours and thickness. We have state of art hydraulic presses as per international standards. We manufacture longest UHMW PE sheet in Asia – 8 Meter Length. We manufacture UHMW PE sheet of different molecular weight ranging from 4.0 Million to 9.2 Million. The colour code has been given to identify the quality of UHMW PE sheet. The Polytron UHMW PE sheet can also be made in desired colour prescribed by customer. The properties of UHMW PE sheet on the right have made it a very economical and better alternative to Stainless Steel and other metals.

UHMWPE roller is an emerging material for conveying industry because of its meticulous properties. The Rollers, Impact pad, Guides, as their name indicates, need Impact strength along with low wear property. This rare combination is found only in POLYTRON UHMW PE. Further, its self lubricating, zero moisture absorption and anti-sticking properties makes it an IDEAL solution for conveying Industry.

The POLYTRON UHMW plastic PE liners are the BEST solution of lining need of industry. Anti-Sticking property of UHMW PE allows the smooth flow of the material. FDA and USDA approved UHMW PE solves lot of critical problems in food industry. Very high impact strength of UHMW PE liner can withstand any blow of product. Lowest coefficient of friction increases the life of Liners in multi-folds and reduces the downtime

The pressure pads, made of Polytron UHMWPE, sustain the impact and do not wear despite the continuous flow of sheet on it. These pads avoid the metal to metal contact and do not allow generating any static charge. Extremely low coefficient of friction of POLYTRON UHMWPE pads, increase the life and eliminates the need of frequent replacement.