Polyurethane Primer Dealers

• Country of Origin: India
• Color: Available in Different Colors
• Packaging Size: 5-25 L
• Shelf Life: 2 Years
• Form: Liquid
• Method of Application: Brush

We are main supplier of this product.

• State: Paste
• Color: White
• Packaging Size: 1-20ltr
• Shelf Life: 2 Years
• Method of Application: Brush
• Quality: Superior

• Usage: Used for waterproofing and protecting of new and old roofs, terraces, podiums, planters etc.

Single component low viscous moisture cured with hgith quality polyurethane base adhesive for concrete surface and structures as a priming membrane.

The PU Primer is excellent under-coat having good adhesion on bare metal, also provides excellent corrosion resistance in the system. This has good adhesion on many plastics also. An ideal Polyurethane primer for excellent adhesion on plastics, FRP & other substrates used in automobiles. Available in grey color.

• P.U.PRIMER: GREY

We are offering polyurethane products. Scope: a two pack p.u paints are used almost exclusively as they offer excellent uv resistance as well as providing a high gloss and enhances durability. P.u. Primer & paints also tend to become tacky quickly due to solvent leaving the surface. � recommended for use in new construction & maintenance services over properly primed surfaces. � excellent long term durability. � an effective top coat for use in refinery, fertilizer, petrochemical chemical transportation industries etc

Neo has extensive range of primers based on Epoxy / PU / Synthetic Resins. NEO PRIME GUARD grades are quality Epoxy based primers while NEO SHIELD PRIME grades are PU primers. These are used as a primer. They exhibit excellent adhesion properties and will stick to bare metal, Paints, primers, and fillers. They are used as a anti corrosive / protective primers. Neo offers multiple grades loaded with special additives, pigments for meeting specific requirements. Surface Preparation: Abrasive blasting to Sa 2 ½ Swedish standards is the best method of surface preparation. In case blasting is not possible, then the surface of steel should be cleaned to St-2/St-3. The surface should be absolutely dry, moisture and oil free before primer application. Application Method: Stir the Base part thoroughly. Mix base and Hardener as per our recommended ratio, by volume, Allow the mixture to stand still (maturation) for about 10-15 minutes to initiate the reaction. Add suggested Thinner into mix, if required, depending on application method, and stir gently for few minutes. Stain the paint through nylon filter cloth of 100 mesh size and apply uniformly over the surface. All equipment used for above should be properly cleaned. Apply By Brush/By Conventional spray.

• Brand Name: Linsol Resin & Polymers
• Packaging Size (ex. 1L or 1Kg): 1 Litre and Also available in 4 Litre, 10 Litre, 20 Litre
• Categories: Oil Based
• Grade Standard: Technical Grade
• 1 Pack: 1pack=15L container +5Litre container

Rajat enterprise is a prominent polyurethane primer manufacturer, supplier, and exporter. The polyurethane primer is manufactured using quality raw material ensuring smooth finish and high adhesion. Our vast range is available in various shades and substrates to meet the clients’ specific requirements. The primers provide pre-treatment and form plastic like films on the surface to be painted. features : excellent base coatwater & chemical solventgloss retention applications : cement surfaceinterior applicationgalvanized surfaces.

We are instrumental in offering polyurethane primer, which is formulated from quality base materials thus ensure long lasting effect. The nagarjuna polycoat primer is a two component (2k) polyurethane primer having anti-corrosive rust inhibitive pigments. Moreover, we offer polyurethane primer at market leading prices. recommended use nagarjuna polycoat primer must be used where a finished coat of polycoat pi/pii paint is to be appliedit has excellent adhesion to a wide range of substrates like metal, wood frp, concrete

MAK ELASTOTHANE PRIMER is a low viscosity bituminous solution used as a base for liquid waterproofing applications such as PU Coatings for sealing and priming porous and non-porous surfaces. It is available in 20 Litre drums. Key Features- • Highly penetrative and excellent adhesion • Used on concrete, metal and timber surfaces • Cold applied and economical

Polyurethane Epoxy Floor Coating Our Range Includes Epoxy Paints, Coal Tar Epoxy, Polyurethane Coatings, Stoving Paints, Fast Drying Enamels, Etch Primer, All Types Of Primers, All Types Of Thinners AD Stoving PU Epoxy Lacquers & Peelable Lacquers Chlorinated Rubber Paints, Tailor Made Anti-Corrosive Coatings & Its Applications

• Packaging Size: 20 Litres
• Curing Time: 20 minutes
• Usage/Application: Concrete Floor
• Packaging Type: Can
• Usage/Application: Concrete Floor
• Finish: High Gloss

• Color: Grey
• State/Form: Liquid
• Product type: PU Primers

With complete help and support of our team members, we deliver high grade and excellent range that commensurate to globally accepted standards. We have trustworthy shipping facilities available to make on time deliveries to the destination.   Description/Use :  Kamicryl-CS0002 is a newly developed premium water base concrete sealer primer utilizing the latest available technology. The coating incorporates water base pure acrylic and polyurethane technology offering superior adhesion and early water resistant properties. Excellent adhesion to difficult substrates including cementitious, glass and glazed tiles, Paver Blocks, Wood, Metals, Plastics, etc.

• Type: P U Paints
• Brand Name: Plasma UC066
• Application: MS
• Type: P U

We present high grade Polyurethane Primer that is very popular among the clients for its efficient performance. Our Polyurethane Primers are available in Grey/MIO and Brown shades. These Polyurethane Primers are mainly used for the coating of Metal and Cement surfaces, PU surface.

Witcoat Polyurethane Paint is a two-component acrylic resin based polyurethane enamel cured with aliphatic polyisocynate. It has excellent gloss & colour retention. It is resistant to water, impact, abrasion and industrial corrosive atmosphere. RECOMMENDED: As a finishing coat for exterior steel and concrete in aggressive marine and industrial environment e. g. L. P. G. storage Tank, Refineries Chemicals and Fertilizer plants, Dock installation, offshore platforms, where light fastness & gloss retention are desired.