Saws Dealers in Sanwer Road, Indore

• Brand Name: Unique
• Usage: Thermal refined steel with HRC30 or higher / Unannealed steel / Hard-to-cut materials (e.g. Inconel)
• Diameter: 250 mm to 580 mm
• Material: Coated Cermet
• Name: BS-Ti (Coated Tipped Saw Blade)
• Suitable For: Solids,Pipes
• Kerf: 2 mm to 4 mm (thin Kerf also available)

Feature: Multi-layer coated BS tipped saws with high heat conductivity can deal with the heat generated during cutting hard-to-cut materials. As cermet is used as a base material, the saws are highly regrindable and reusable.

• Type: Packaging Machine Blades
• Application: Industrial Use
• Color: Metallic
• Packaging Type: All Type
• Country of Origin: India

• Application: Industrial,Workshop,Metal Cutting
• Brand Name: Unique
• Motor Power: 2 HP
• Cutting Angle: 45 Degree,90 Degree
• Model Name: USM-275CS

• FRICTION SAW: OD 450, 510, 600, 710, 35 mm

DeeTee’s friction saws are made from imported Chrome-Vanadium Steel and are wearshock resistant at high cutting speeds. Tooth profiles are obtained from Vollmer Machine of Germany. Friction Saws of OD 450, 510, 600, 710 and bore 35 mm are available off the shelf. Friction saw operation is based on strength of the frictional heat, which is generated between saw teeth and work piece when the saw runs at high speed. Cr-V steels retains its toughness and has ability to resist the stress of high operating speeds (60 - 90 meter per second). Saw should be mounted true and should not run out.

For metal cutting Circular Saw Blade

• Size: 3m x 27 x0.9
• Type: bi-metal
• Brand Name: TECHMACUT
• Length: 3000
• Application: MILD STEEL, STEENLEES STEEL

sawing is particularly advisable when clean cutting is to be performed. Circular saw blades are used generally to perform such clean cutting using a friction saw blades. Dee tee friction Saw Blades are designed for High Speed Cutting. These saw are manufactured from Chrome vanadium (Cr-V) Steel, 1.2235, with maximum stability at surface on 60-90 meter per second.Circular saw blades Friction Saw operation is based on the strength of the frictional heat which is generated between the saw teeth.& work piece when the saw runs at high speed, Cr-V steel retains its toughness & has ability to resist the stress of high operating speeds. The most suitable hardness is 40-44 HRC. Circular saw blades friction saw edge retention quality is ensured by closely controlled heat treatment. Circular Saw blades Friction Saw is used to cut aluminum, non ferrous metals, plastics etc, Higher speed of (80-120) mtssecond is recommended.

DeeTee’s friction saws are made from imported Chrome-Vanadium Steel and are wearshock resistant at high cutting speeds. Tooth profiles are obtained from Vollmer Machine of Germany. Friction Saws of OD 450, 510, 600, 710 and bore 35 mm are available off the shelf. Friction saw operation is based on strength of the frictional heat, which is generated between saw teeth and work piece when the saw runs at high speed. Cr-V steels retains its toughness and has ability to resist the stress of high operating speeds (60 - 90 meter per second). Saw should be mounted true and should not run out.

Friction Saws, Cold Rolling Mill Rolls, Flattener Rolls

vertical band saw

Cold Saws, Horizontal Bandsaw Machine, Bimetal Bandsaw Blades

hss hacksaw blades

metal cutting band saw, Bandsaw Machine, bandsaw machine manufacturers

Circular Saw Blades

Circular Saw Blades