Scientific Instruments Dealers in Indore

IRthermo-Anemometer is with built-in non-contact Infrared Thermometer. The IRthermo-Anemometer is the air velocity, air flow (volume), air temperature, and non-contact infrared temperature measuring instrument. To measure the air velocity, put the sensor head face to the measurement air. Then the first reading will show the air velocity value. To measure a temperature, point the meter at a target until the temperature is read. (Make sure the target area is larger than the unit’s spot size. For large target object ensure that you are within target distance.) Applications: Environmental testing Ventilation system Refrigerated case Fans / motors / blowers Far distance temp. Monitor Flow hoods Air conveyors Furnace velocity FEATURES : Simultaneous display of air flow in CFM / CMM or air velocity plus ambient temperatures. Combination of hot wire & standard thermister, deliver rapid & precise measurements event at low air velocity. Wide range measurement of air velocity, fast response time. Multi-functions for air velocity measurement: m/s, km/h, ft/min, knots, mile/h. Infrared thermometer measures remote surface temperature to 932°F (500°C) with 8:1 distance to spot ratio and laser pointer. USB PC Interface. Super large LCD with dual function display, read the air velocity & temperature at the same time. Real time data logger, built in clock (hour-min.-sec., Year-month-date). Data hold and record / recall maximum, minimum and average reading. Ultra low power consumption in shutdown mode. Auto power off after 10 minutes (30 Minutes with AC Power) SAFETY: CE Certification EN61326- : Electrical equipment for measurement, control & laboratory use. IEC61000-4-2 : Electrostatic discharge immunity test. IEC61000-4-3 : Radiated, radiofrequency, electromagnetic field immunity test. IEC61000-4-8 : Power frequency magnetic field immunity test. IEC60825-1 : Safety.  

• Brand Name: Fluval
• Feature: Compact Design With Large,Easy-to-read Markings,Ideal Salinity Range Clearly Identified In Green For Added Convenience,Can Be Permanently Installed Inside The Tank For Continuous Readings,Or Used As A Portable Measuring Device When Necessary,For
• Categories: Aquacare/Filtration, Aquarium Accessories, SEA Hydrometer

The Fluval SEA Hydrometer accurately and conveniently measures salt levels and specific gravity in marine aquariums.

• Material: Metal
• Voltage: 110 V-220 V
• Power Source: Electric
• Application: Laboratory
• Frequency: 50 Hz

• Certification: CE Certified
• Voltage: 6-12VDC
• Application: Measuring Use
• Display Type: Digital
• Driven Type: Battery
• Feature: Accuracy, Four Times Stronger, Superior Finish
• Warranty: 2yrs

The U Tube Manometer, we offer, are used for all kinds of industries, applied in gas, liquid, and vapor medium. Our U Tube Manometer is available in various cases such as plastic, black steel, stainless steel etc. The U Tube Manometer, we offer, features rigid construction designed mainly for high line pressure operation.

We are offering rangoli. The digital panel meter has been designed for industrial applications, where precise and accuracy of the display range is frequently required. It can be used in industrial automation, laboratory uses and all kind of electrical panels for accurate measurement of current and voltages. Features available in size 96mm x 96mm and 96mm x 48mm. Accuracy - 1%. Available with standard current and voltage ranges. 3 ½ digit ultra bright display. Auxiliary power supply : ac:1) 230v ( 10% -15%). Highly adaptable dpms suitable for a wide range of measuring applications.

• Application: Laboratory Use
• Feature: Excellent, Fine Finish, Long Functional Life
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Finish: Polished

• Type: Bomb Calorimeter
• Certification: ISO 9001:2008
• Application: Industrial Use
• Color: Grey, Maroon, White
• Voltage: 220V
• Frequency: 50Hz-65Hz
• Material: Cast Iron, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs
• Automation Grade: Automatic

• Accuracy: + 0.3% + 2 dgs
• Features: Compact Highly Reliable 3-1/2 Digit Instrument, Uses 4 Terminal Measurement method, Has 12.5 mm high 7 segment 3-1/2 Digits LED Display
• Model: 53C
• Range: 0 - 1999u / 19.99m / 199.9m / 1.999 / 19.99 / 199.9 / 1999 Ohms
• Normal Test Current: 1.5 / 0.75 / 0.75 / 75m / 7.5m/ 0.75m / 0.075mA
• Warm up Time: 3 minutes
• Input: 230V Single Phase AC 50Hz

• Brand Name: Insize
• Material: Stainless Steel
• Display Type: Digital

High voltage Insulation TesterTest voltage 5KV/2.5KV/1KV/500V/250VMeasurement insulation range, up to 5 TΩDiagnose the insulation of various equipmentBuilt-in memory for data storage Insulation Tester (50v/125v/500v/1000v)Measurement insulation range, Up to 4000 M Ω

Nvis 6052 Experimentation with Sonometer is a useful apparatus for investigating the vibration of a string or wire under tension. The equipment allows the length of the string and its tension to be varied. Sonometer can determine the Frequency of AC mains in an easy way with very precise and fine arrangement. It consists of a thin metallic (steel) wire stretched over two bridges that are usually mounted on a soundboard, also known as monochord. It is used to measure the vibration frequency, tension, density, or diameter of the wire, or to verify relations between these quantities.

The ISO 5000 is an electronic insulation resistance tester with a resistance range of 500 kΩ to 500GΩ and an analogue indication. The instrument is engineered to measure and analyze the insulation resistance and safety of motors, machines, ground cables, transformers etc. The tester also measures AC and DC voltage up to 600 V. The logarithmic scale clearly indicates the value. During the development of the tester, the engineers paid special attention to the safety standards (IEC1010) and the requirements of the user. Under normal circumstances, 2.500 measurements can be performed on a stand-alone base.

• Synthesized Function Generator Frequency Range :: 1 mHz to 5MHz (Sine), 1mHz to 3MHz (others)
• Sampling Rate :: 100MSPS
• Digital Storage Oscilloscope No. of Channels :: 2 Analog (CH1 & CH2)
• 3-dB Band-width :: 10MHz
• Mixed Signal Oscilloscope No. of Channels :: 1 Analog (CH1) + 8 Digital
• 100MSPS per channel :: 8-bit per channel
• Logic Analyzer No. of Channels :: 16
• Digital Pattern Generator No. of Channel :: 8
• Frequency Range :: 1KHz to 5MHz
• Variable Power Supply No. of Channel :: 2
• Output Voltage :: ±12V

• Type: Electronics Laboratory Instruments
• Certification: ISO 9001:2008
• Weight: 10-20kg
• Voltage: 110V, 220V
• Power: 3-6kw, 6-9kw
• Driven Type: Electronics Laboratory Instruments
• Warranty: 1yrs
• Condition: New
• Automatic Grade: Automatic

We are the main supplier of this product.

• Item Code: MI-10-KV

The Megohm meter MI10kV is a very robust insulation resistance tester to measure up to respectively 2.000.000 MΩ. With the selectable test voltages, the instruments can also be used for measurements at smaller (LV) installations. The tester is especially designed for field use (stand-alone, due to the integrated battery), to measure transmission/distribution lines, medium voltage distribution systems, etc. They can also detect cable defects. The test values are easily and accurately displayed on the analogue scale.During the development of the tester, the engineers paid special attention to the safety standards (IEC 1010-1) and the requirements of the user. The practical, suitcase shaped and robust housing includes special storage for probes, leads and other accessories.Including: Manual Test leads (high voltage) Carrying bag Adapter.

• Application: Industrial
• Brand Name: Amprobe
• Model Name/Number: Amprobe AMB-110 Industrial High-Voltage Insulation Tester
• Weight: 5.5 kg (12.1 lb)
• Voltage: 0 - 9999V
• I Deal In: New Only
• Size: 36 X 16 X 33 cm (14.2 X 6.3 X 13 in)
• Battery Type: 6 X 1.2V Ni-MH,IEC LR20
• Size/Dimension: 36 X 16 X 33 cm (14.2 X 6.3 X 13 in)
• Minimum Order Quantity: 1 Piece

• Output voltage:: AC:5kV/10mA; DC:6kV/5mA
• dot-matrix,TFT-LCD display: 480×272

Randomly set Voltage rising time and testing time, Test voltage of insulation resistance: 0.10kV-1.00kV, Test range of insulation resistance:1M -1000M, Provide 4 channels, 8 channels scan interface, Rapid Discharge and Arc detection

We offer Mitutoyo brand Digital Electronic Vernier Caliper with Superb resistance to Water, Oil, Dust and Coolant, making it ideal for tough workshop applications.Features: Water, Oil, Dust, Coolant and Submersion resistance (on IP67 model) Imperial /Metric conversion Large LCD Display Origin Setting Absolute feature Error free with no over speed error Auto power on /off Incorporates Quadri Feature Lock Nut Thumb Roller

FTIR spectrometer are designed and manufactured in the way and have very comparable performance to analytical instruments from other manufacturers around the world.We keep constantly moving in tune with our customers sharing with them valuable information related to the experiments in life science, chemical analysis and all of others. Wherever there’s a need to use analytical instruments,

• Application: Voltage Testing

We are the manufacturers, exporters and supplier of this products.

• Type: Lactometer
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Application: Industrial Use
• Display Type: Analog, Digital
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year, 2Years
• Certificate: CE Certified, ISO 9001:2008
• Automation Grade: Automatic, Manual

• Viscosity: 0.3-60 Rpm
• Material: Wood
• Usage/Application: Laboratory
• Shape: T Shape
• Temperature Range: 50 Degree C

• Size: 48mm x 29mm x 21mm
• Display color: Red & Blue LED (dual display)
• Display: 0.28" LED digital
• Operating voltage: DC 4.5
• Measure voltage: DC 0
• Operating Current: <20mA.
• Operating temperature: 10 to 65°c
• Operating Humidity: 10 to 80% (non-condensing)

• Brand Name: BE switch
• Country of Origin: Made in India  
• Usage/Application: Industrial, Laboratory

• Brand Name: Amprobe
• Usage/Application: Industrial
• Size: 36 X 16 X 33 cm (14.2 X 6.3 X 13 in)
• Weight: 5.5 kg (12.1 lb)
• Voltage: 0 - 9999V

We are the leading exporters and supplier of this products.

IntrX INM502 2 MHz Digital AC Milli VoltMeter

We are an acclaimed manufacturer of Vernier Calipers that have a metallic body for a trouble-free measurements of the objects. The users can get an accuracy of ±0.03mm with our precision made vernier calipers that are finely packed prior delivery to the valuable customers.

dc meter, Electrical Equipment, Energy Meter, npc wires