Distribution Transformers Dealers in Amitesh Nagar, Indore

We are offering power transformer, distribution transformer. Product ranges from 16 kva to 2000 kva up to 33 kv. Syemco transformer are designed and tested as per is: 2026, bs -171, iec -76 & iec- 126. Transformer will be connected as per vector group reference dyn 11. Other vector groups can be offered as per specific requirements. H.v bare bushing or cable box, l.v. bare bushing or cable box disconnecting. Transformers are designed for a maximum temperature rise of 40500 c of oil winding. Lower temperature rise can be offered on request. The core is constructed from low loss, cold rolled, grain oriented, annealed laminations of electrical sheet conforming to the latest international standards. Special frame is built in-house from clamping the core to reduce the magnetic noise as well as making the whole structure rigid and robust. Coils are wound with electrolytic high conductivity paper covered of synthetic enameled copper conductors. Cooling ducts are provided to keep the hot spot temperature as low as possible. Coils are dried in electric ovens. Rigid connection support and coil clamping is provided to ensure high short circuit strength. Precompressed board parmali board and japneese insulation paper of best quality is used. oil is tested for resistivity , dielectric and acidic character conforming to is-335. Before topping up oil is filtered thoroughly. The tanks are made of m.s. Steel platessheets with adequate bracing & stiffness. Tanks are pressure tested to withstand any type of inside or outside pressure, all the external surface are given a primary coat of zinc chromate, red oxide and two finishing coats of grey paint. The inner surfaces are given a coat of heat and oil resisting paint. All syemco transformers undergo rigorous quality control check and are routine tested as per is in our fully equipped laboratory. Any specific test required by the customer can also be arranged. standard fittings :- rating and diagram plate, earthing terminals-no.2, lifting lungs, oil level indicator. Drain –cum bottom filter valve with plug, oil filling hole with plug on conservator, oil conservator with drain plug, air release plug, silica gel air breather, bi- directional flate rollers, hv terminals-outdoor bushings, lv terminals –outdoor bushings, radiators, filter valve with plug, the mometer pocket, oil temperature indicator, externally operated off circuit tap changing switch, explosion vent.

Small EHV Substation With Isolators, Ehv Substation, Ehv Transmission Tower

electrical substation, transmission towers