Zircon Coatings Dealers

Zircon Coatings, Zircon Flour, Magnesite Paint, zircon paint

• Country of Origin: India
• Color: Off White
• Grade Standard: Industrial Grade
• Brand Name: FSN
• Certification: ISO 9001-2005
• Soluable In Water: Yes
• Shelf Life: 1Year
• Form: Liquid

We have come up as a major Manufacturer and Supplier of Zircon Water Based Coatings. The Effcol 100 ZWB is a zircon and water based coating that is offered in a paste or ready-to-use form. Based on high quality zircon, the Zircon Water Based Coatings impart excellent thixotropic properties, resulting in superior suspension characteristics. The Zircon Water Based Coatings grant excellent performance at high temperatures, and a clean and smooth surface finish of casting is obtained.   Typical Properties : Colour : Off-White Specific Gravity : 2.20-2.30 grams/cc Application : Product is used for all Cast Iron and Steel grades as well as for Aluminum and can be applied on Cores and Moulds of Cold-Box, Hot-Box and shell resin process. Suitable for Brushing as it is, and optionally dipping/spraying after slight dilution. Drying the coating has to be conducted in an oven at 150-180 degree for 1 hour, when a homogenous and dense coating film is formed. Advantages : Less preparation time and fast deposit of the coating on the cores. As the product is supplied in ready for use form, thorough mixing of all the ingredients takes place at the time of manufacture. Product gives a complete and uniform coverage, which ensures a good casting finish, free from veining, fining, fusion and penetration and hence lowers the casting cleaning costs. Storage and Handling : The product should be stored at a room temperature under roof and away from direct sunlight and moisture. Use of safety gears and gadgets is a must while handling the above product.   Shelf life : 4 months from the date of manufacture. Standard Packing : 40 kg in poly carboys. Directions for Use Effcol 100 ZWB should be mixed with a pneumatic or an electric mixed. Material should be mixed thoroughly in its container before diluting with water. Ideally hardness should be below 90 ppm. Effcol 100 ZWB is designed to be diluted by the customer to its proper specification according application. Effcol 100 ZWB must be torch or oven dried prior do casting.

• Size: Liquid
• Model Number: ZW
• Brand Name: Unique
• Material: Zircon
• Mesh Size: 300
• Application: Foundry mould coating
• Weight: 30
• Shelf Life: 1 year
• Color: Off white
• Melting Point: 3200

Zircon is Zirconium Silicate (ZrSiO4). Mineral produced at various mineral separation plants form specific grades in terms of ZrO2 content ranging from 64.5 % to about 65.5 % with SiO2 content of little over 32%.

• Baume: 55 - 60 min.
• Specific gravity (gm/cc): 1.60-1.65 gm/cc

COTPOL EP256 is a ready-for-use flammable zircon coating having excellent suspension and covering properties. COTPOL EP256 is suitable for Use ongreen sand, CO2 set and resin bonded sand mouldscores, and for casting almost all metals including critical jobs in heavy cast iron and steel foundries COTPOL EP256 is also effective on all grades of iron, copper and nickel based composition and light alloys in green sand, sodium silicate and resin bonded moulds. When casting high temperature alloys such as steel, cast iron etc., it is necessary to coat the sand surface, which come into contact with molten metal to prevent sand wash, sand erosion, metalmould reaction and burn-on. COTPOL EP256 is designed to withstand high temperature of molten metal while acting as a barrier between molten metal and a core or mould surface thereby helping in preventing sand burn on, metal penetration, wash erosion, metalmould reaction, and other common defects when casting high temperature alloys such as steel, cast iron and non ferrous alloys. COTPOL EP256 is a carefully formulated coating to ensure a highly refractory, non-wettable and non-reactive coating layer with optimum application properties to give excellent casting finish.

Zircon Solvent based yellow colored coating, suitable for Sodium-Silicate Alpha Set Resin Sand System. Changes color from Yellow to Orange on ignition. To eliminate all moisture related defects To identify poor sand compaction in a core or mould. [as these areas will absorb more moisture from coating and will take longer time to dry] To optimize on cost of drying – Avoid over heating by oven torch

• Country of Origin: India
• Type: Zircon Coatings
• Color: White
• Grade Standard: Industrial Grade
• Brand Name: MAHADEV ENTERPRISES
• Material: HDPE
• Certification: ISO 9001:2008
• Weight Per Litre: 40 KG/ BUCKET
• Surface Finishing: Polished
• Soluable In Water: Yes
• Shelf Life: OK
• Purity: OK
• Texture: Soft
• Form: Liquid
• Pattern: OK
• Waterproof: OK
• Packaging Type: Plastic Drums
• Packaging Size: 25-50Kg
• Speciality: OK
• Coating Thickness: OK
• Usage: Industrial Use

These are solvent or water based, fusion inhibiting, refractory coatings to be applied on mould walls or cores primarily to give good surface finish and consistent casting quality. This is achieved by Enabling better molten metal flow characteristics thus enabling better filling in intricate mould cavities Preventing surface defects such as metal penetration, sand burn-on (fusion), carbon pick up, sand expansion defects (such as veining, rat tail, finning etc.) or lustrous carbon defect. Preventing mould wall erosion and thus subsequent inclusions in molten metal Improving stripping characteristics of castings

• Brand Name: Scottish Chemicals
• Grade Standard: Technical Grade
• Specific Gravity: 2.42 g/cc
• Country of Origin: Made in India
• Product Code: Scot-H-Cote110
• Physical State: Liquid
• Usage/Application: Industrial
• Appearance: Off white paste
• Maximum Temperature: 850 Degree Centigarde

Stir the coating thoroughly before application Take out requisite quantity of Craftanol-256 IP; if required dilute the coating by CRAFTANOL THINNER to desired degree of consistency as per application practice. Brushing:- Ready For Use(After thorough mixing) Apply the coating by brushing. Ignite the coating immediately after applying. In case of large moulds part mould to be coated & ignited immediately.Craftanol- 256 IP is recommended for high temperature metals like Steels, Alloy Steels, heavy section cast irons and for copper base alloys. High temperature metals heavy section cast iron precision cast iron casting requires high temperature coating barriers which can withstand high metallostatic pressure of liquid metal to prevent Sand fusion other problems related to Sand and to improve the surface finish of Casting.

conref nano zircon based coating

These coatings are technically composed to serve at high temperatures like heavy duty steel and iron castings for getting the best possible surface finish. These coatings are available in the form of paste and ready to use with the base of spirit and water.

foundry zircon coatings, aluminium silicate coatings, Refractory Coatings

zircon coating, Foundry Chemicals, Exothermic Sleeves, insulating sleeves

alcohol based zircon coating, Foundry Chemicals, coating powder, thinner

Zircon Coatings, foundry coatings, Foundry Copper Phosphorus Chemicals

zircon coating, Fedexo 55, Graphite Coating

Isocoat 100 Zircon Based Coating, Non-Ferrous Forging Lubricants

Zircon Base Coating, Coating And Cold Box Resin, Foundry Chemicals

zircon based products, Agro Products

zircon coating

Zircon Paint Coating, Alumina, Sunflower Wax, Low Cement Castable, Pebbles

Zircon Coatings, chaton beads

zircon refractory coatings, Steel Castings, Exothermic Sleeves, Perlite Ore

zircon coating, foundry coatings