Blow Down Valve Dealers

• Country of Origin: India
• Size: #150/ #300/ #600
• Material: Carbon Steel
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Pressure: High
• Brand Name: HAMA

• Material: Cast Iron
• Valve Size: 8-700 mm
• Surface Finish: Polished
• Brand: Flowtech
• Actuator: Pneumatic

• Material: Cast Steel
• Size: 25MM
• Corrosion Resistance: Yes
• Tensile Strength: 200-300 MPa
• Hardness: 60-70 HRC

• Material: Alloy
• Pressure: Medium Pressure
• Structure: Control
• Power: Manual
• Brand Name: Qinn
• Supply Ability: 150 Piece/Pieces per Month
• Model Number: Q-116 And Q-303
• Standard or Nonstandard: Standard
• Lead Time: 45 to 60 days

• Brand Name: VALVES
• Material: Stainless Steel
• Condition: New
• Finishing: Polished
• Automatic Grade: Manual
• Actuation Type: Single Acting
• Usage: Water Fitting

A **CS Blow Down Valve** is a specialized valve used in industrial systems to remove contaminants such as sediment, debris, or water from a steam, gas, or liquid system. It is typically made of **Carbon Steel (CS)** for durability and resistance to high pressure and temperature.    ### Features: - **Material**: Carbon Steel for strength and corrosion resistance. - **Application**: Commonly used in boilers, pipelines, and pressure vessels. - **Operation**: Quick opening and closing for effective removal of impurities. - **Design**: Compact and robust to handle high-stress conditions.   ### Benefits: - Enhances the efficiency and safety of the system. - Prevents equipment damage due to accumulation of impurities. - Reduces maintenance and downtime.   If you'd like detailed specifications or product recommendations, I can assist further!

• Material: Stainless Steel
• Condition: New
• Pressure: High
• Application: Industrial

• Type: Continuous Blow Down Valve, Intermittent Blow Down valve
• Brand Name: IndiTech Valves Private Limited
• Material: Carbon Steel, Alloy Steel
• Pressure: Upto 220 bar
• Media: Water & Steam
• Temperature Of Media: Saturated
• Country of Origin: PUNE,India
• Model Number: IVPL- IBDV, IVPL- CBDV

The primary function of a blowdown valve is to control the concentrations of suspended & total dissolved solids (tds) in the boiler. Boiler blowdown is a severe service application which results in rapid erosion and wearing out of conventional valves. Continuous blowdown (cbd) valves are designed to operate in continuous open position by releasing water continuously through a blowdown tap near the boiler water surface, thereby maintaining the tds level in the boiler drum. Inditech continuous blowdown valve is an angle type valve with a needle shaped trim in a venturi diffuser. The venturi diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.

• Material: Metal
• Color: Available in various colours
• Pressure: High, Low, Medium
• Application: Industrial
• Feature: Blow-Out-Proof, Durable, Heat Resistance, Investment Casting, Non Breakable
• Part No.: 1622369480
• Uses in Machines: Atlus

• Material: Stainless Steel
• End Connection Type: Flanged
• Valve Size: 8mm-700mm
• Weight: 100 to 500 gram
• Surface Finish: Polished
• Pressure Range: 150 - 2500 Bar

• Size: 1.1/2inch, 1/2inch, 1inch, 2inch
• Material: Carbon Steeel, Carbon Steel, Cast Steel
• Certification: ISO 9001:2008 Certified
• Application: Industrial
• Color: White
• Pressure: High, Medium
• Number Of Way: 2way
• Brand Name: UTVC make

blow down valve utvc make continuous blow down valve is an angle type valve with a needle shaped trim in a venture diffuser. The venture diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.   utvc make intermittent blow down (non ibr) valves are designed to operate at predetermined intervals by releasing water & accumulated sludge periodically through a blow down tap near the bottom of the boiler

• Size: 1.1/2inch, 1inch, 2inch
• Type: Blow Down Valve
• Material: Carbon Steeel, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Application: Industrial
• Pressure: High, Medium
• Number Of Way: 2way
• Country of Origin: India
• Brand Name: IndiTech

The primary function of a blowdown valve is to control the concentrations of suspended & total dissolved solids (TDS) in the boiler. Boiler blowdown is a severe service application which results in rapid erosion and wearing out of conventional valves. Continuous Blowdown (CBD) valves are designed to operate in continuous open position by releasing water continuously through a blowdown tap near the boiler water surface, thereby maintaining the TDS level in the boiler drum. IndiTech Continuous Blowdown Valve is an angle type valve with a needle shaped trim in a venturi diffuser. The venturi diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow.   Intermittent Blowdown (IBD) valves are designed to operate at predetermined intervals by releasing water & accumulated sludge periodically through a blowdown tap near the bottom of the boiler. The primary requirement of these valves is to provide tight shut-off even after repetitive blowdown operations. Earlier, these two functions (blowdown and sealing) were performed by two different valves installed in series and operated in a definite sequence. IndiTech Intermittent Blowdown Valve carries out both these functions in sequence i.e. blowdown in open position and sealing in closed position. This is achieved by providing a multi-step throttling plug, which splits the total pressure drop across each step. The sealing area is separate from the throttling area, which reduces erosion and provides leak tightness even after prolonged usage.   Features Separate trim design for CBD and IBD Pressure seal bonnet for ANSI #1500 and #2500 Stellited plug-spindle & seat Integral plug-spindle Extra-long gland packing with provision of online maintenance Quick and easy installation, dismantling & maintenance Approved under IBR (Indian Boiler Regulation Act).

• Material: Cast Iron
• Brand Name: Flowtech
• Valve Size: 8-700 mm
• Surface Finish: Polished
• Actuator: Pneumatic
• Gland: Ductile Iron
• Gland Packing: Grafoil Ring

• Size: 1 Inch to 3 Inch NB IBR Approved
• Pressure Rating: ANSI #300 to #2500 (Max 150 Bar, 550 Deg C)
• Body Material: A105/A182 F11/ A182 F22
• End Connections: Flanged / Socket Weld / Butt Weld
• Leakage Class: Class IV / Class V
• Operation: Manual / Motorized / Quick Action

A steam boiler evaporates liquid water to form steam, or gaseous water; and requires frequent replenishment of boiler feedwater for the continuous production of steam required by most boiler applications. Water is a capable solvent, and will dissolve small amounts of solids from piping and containers including the boiler. Continuing evaporation of steam concentrates dissolved impurities until they reach levels potentially damaging to steam production within the boiler. Without blowdown, impurities would reach saturation levels and begin to precipitate within the boiler. Impurity concentrations are highest where steam is being produced near heat exchange surfaces. Precipitation would be expected to occur in the form of scale deposits on those heat exchange surfaces. Scale deposits thermally insulate heat exchange surfaces initially decreasing the rate of steam generation, and potentially causing boiler metals to reach failure temperatures. We carry a ready stock of Gestra , Spirax , Flowserve & equi to  all other reputed brand of valves. We manufacture all type of blowdown & condensate recovery systems ( continuos & intermediate ).

• Brand Name: Floster
• Body: ASTM A 216 GR. WCB
• Gland: Ductile Iron
• Rack: ASTM A 351 GR. CA 15 (13% Cr.)
• Pinion: ASTM A 351 GR. CA 15 (13% Cr.)
• Disc: ASTM A 351 GR. CA 15 (13% Cr.)
• Seat: ASTM A 351 GR. CA 15 (13% Cr.)
• Gasket: S.S. Spiral Wound With CAF/Grafoil
• Gland Packing: Grafoil Ring
• Stud & Nut: ASTM A 193 GR. B7/ A 194 GR. 2H/S.S. 304/316
• MOC: Cast Steel (Gr. WCB)
• Mode of Connection: Flanged End
• Model Number: IBR Blow Down Valve
• Operation: Manual

• Material: WCB
• Power: MANAUAL/ GEAR
• End Connection Type: FLANGE
• Size: 1/2" - TO 4"
• Model Name/Number: 4MBDN
• Brand: 4Matic

• Design: Rack and Pinion type
• Pressure Rating: Class

Blow down Valve "HP" make Continuous Blow down Valve is an angle type valve with a needle shaped trim in a venture diffuser. The venture diffuser provides sufficient area for the high velocity flashing water, thereby avoiding choked flow. "HP" make Intermittent Blow down (IBD) valves are designed to operate at predetermined intervals by releasing water & accumulated sludge periodically through a blowdown tap near the bottom of the boiler.