Common-mode Choke Dealers

• Certification: ISI
• Phase: 3 Phase
• Voltage: 250 V
• Usage/Application: Industrial
• Maximum Operating Temperature: 50 Degree C
• Current: 25 Amp
• Brand: Bla Etech Pvt Ltd
• Ballast Type: Electronic Ballast

• Voltage: 12 V
• Material: Copper
• Operating Temperature Range: 55 Deg C to 125 Deg C
• Test Condition: 1MHz, 1.0Vrms
• Efficiency: 98%

All thanks to our modern transit amenities owing to which we are capable to furnish safe and time-bound deliveries. We are a prominent name offering quality-centralized array of products that are the perfect outcome of premium raw material and modern work methods. Also, we source the material from the reliable places only.   Features : Best quality High in demand Cost effective

• Material: Copper
• Frequency: 50hz-60hz
• Current: 10a
• Test Condition: 1mhz, 1.0vrms
• Operating Temperature Range: 55 Deg C To 125 Deg C
• Quality: Good

• Type: Common-mode Choke
• Application: Electrical Equipments, Electronic Equipments
• Condition: New

We are offering common mode choke.

• Power: 0.5 HP- 100 HP
• Depth: 16.30 mm
• Width: 25.50 mm

• Power: 1.5 kW
• Phase: Single Phase
• Brand: Shivani
• DC Resistance: 4.5mOhm
• Maximum Operating Temperature: 105 Degree C
• Wire Thickness: 6mm
• Current: 20A
• Finishing Type: Polished

• FEATURES: High common mode impedance, Suitable for wave soldering,
• Brand: Magno Teknik
• Usage/Application: SMPS Power Supplies, EMI Suppression, Main Filter
• Operating Temperature: -40 to +125 Degree Celsius
• Operating Voltage: 250 Vac
• Interference Suppression: 1% Stray Inductance Approx
• Suitable For: Wave Soldering

• Features: High performance, Fine finish, Durability, Longer service life, Compact design

• Features: Durable standards, Perfect finish, Easy installation

We offer Common mode choke as per customer design and specification in following types :   UU Series       EE Series  UT Series       ET Series  

• Features: Durability, Robustness , Less maintenance

We manufacture and supply Common Mode Chokes. The technologically advanced facilities at our manufacturing unit enable us to offer efficient Common Mode Chokes that are very low on operational cost. Our Common Mode Chokes are ideal for noise cancellation and filtering purposes. We also offer customization of Common Mode Chokes as per the client̢۪s specifications. FeaturesHigh efficiencyLow maintenance costExcellent temperature resistanceAffordable price

• Country of Origin: Made in India
• Ballast Type: Magnetic Ballast
• Frequency: 50Hz
• Ballast Type: Magnetic Ballast

The filter circuit of Common Mode Inductance: La and Lb are common mode inductance coils. The two coils are wound around the same core, with the same number of turns and phases (the winding is reversed). When the normal current flows through the common-mode inductance, the current in the same phase winding inductance coil generates reversed magnetic fields, and then the reversed magnetic fields cancel each other out. At the moment, the normal signal current is mainly affected by the coil resistance (and a small amount of damping caused by leakage); When the common-mode current flows through the coil, as a result of the same direction of common-mode current, there will produce same direction magnetic field in the coil and increase the coil impedance, which will make coil performance for high impedance and produce stronger damping effect, by this to damp common-mode current and achieve the goal of filtering. In fact, the filter circuit is connected to the interference source at one end, the other end is connected to the interference device, then La and C1, Lb and C2 constitute two sets of low-pass filters; Then the common mode EMI signal will be controlled at a very low level. The circuit not only can control the incoming of EMI signal, but also can attenuate the EMI signal generated by the line itself, which can effectively reduce the EMI interference strength. Now a small domestic common mode inductors, with the use of high-frequency noise suppression measures, common mode choke coil structure, its signal will not damp. Such small common mode inductor is also with the advantages of small size, easy of use, good balance, high quality and so on. It is widely used in double balanced tuning devices, multi-frequency transformers, impedance transformers, balanced and unbalanced transformers etc.　 Features High initial permeability and high AL value High effective insertion loss and excellent noise suppression Wide frequency range, large adjustable range for permeability （µ0）from 20000～160000 Low core loss，small choke size for volume and weight with epoxy coating Application Switched-mode Power supplies Common Mode noise suppression Precision equipment protection Power grid EMI harmonic filtering Other EMC application areas EMI common mode fliter Single-phase or three-phase power lines

• Features: Flawless strength, Quality finish, High performance level.
• Use: Mainly used to provide a different earthling point for a useful as well as active antenna.

• Material: Copper
• Brand Name: CLEEM
• Inductance Range: 500 uH, 1 mH to 30 mH
• Core Type: Toroidal core
• Current: 500 mA to 15 Amps
• Inductance: 500 uH, 1 mH to 30 mH
• Maximum Operating Temperature: 80 Deg. C

• Ballast Type: Electronic Ballast
• DC Resistance: Yes
• Usage/Application: Transformer
• Start Method: Instant Start

Common Mode Chokes are used when many electrical devices may be connected to the same power lines (or power supply lines) and therefore substantial electrical noise can exist on these lines.Line filters prevent excessive noise from being conducted between electronic equipment and the AC line. Noise is typically common to both lines and in the same direction. Common mode chokes are designed so that common mode current creates a magnetic flux (through mutual inductance) that adds to attenuate the CM noise signal.