Electric Cables Dealers in Murlipura, Jaipur

Aerial self supported telecom distribution cables are an economical and reliable way to provide connections between the telephone exchanges and distribution points, especially in hilly and uneven terrain. Tirupati Plastomatics offer the complete range of Aerial Cables conforming to various national and international specifications like G/CAF-01/01.Nov̢۪92, 52-23/85-TRC, BS:3573/90, IEC:708-1, IEC:708-4, CW 1252A, that a customer may desire.

We serve you with an ultimate variety of Multicore Flexible Cables that have met the desired expectations of the clients in terms of quality and performance. The Multicore Flexible Cables that we manufacture, export, and supply are known for perfect insulation. Owing to safe usage, our Multicore Flexible Cables are highly acclaimed by the clients. Our Multicore Flexible Cables Are Used For Domestic electrical wiringIndustrial electrical wiring Widely Demanded By Mining IndustryElectrical IndustryEnergy and Power Industry

• white: black

We are offering cctv camera cable. Pure copper 2+1, 3+1 , 4+1, 6+1, 4+2 ccpl differentiator = virgin copper & virgin pvc.

HT CABLES- MEDIUM VOLTAGE ELECTRIC CABLE Voltage Range- 3.3 KV to 33 KVMedium voltage cables to IEC 60502-2 (Design and Consideration)+   A high voltage cable (HV cable) is a cable used for electric power transmission at high voltage. A cable includes a conductor and insulation, and is suitable for being run underground or underwater. This is in contrast to an overhead line, which does not have insulation.ConstructionSingle core or Three core cables consist of the following components: ConductorConductors are made of copper or aluminium. Conductor design is usually circular stranded, and compacted. Our conductor design is in compliance with the requirements of IEC 60228 and BS 6360 Specification.Insulation Triple extrusion of inner semi-conductor (conductor screen). XLPE insulation, and outer semi-conductor (insulation screen) is applied. XLPE insulation is water cured. XLPE insulation is as per the requirements of IEC 60502-2 or as per customer’s requirements. Metallic screenThe metallic screen is usually made of copper wires or copper tape. Radial water sealing such as AL-pe laminate and longitudinal water sealing may be applied upon customer’s request. AssemblyAll cables cores are laid up together with usage of non hygroscopic filler material. These fillers are temperature compatible with all different cable layers such insulation, bedding and sheath. ArmouringArmour material can be either aluminium for single core cables or steel for multi core cables. Armour can be either wires or tapes. Our cable armouring is in compliance with the requirements of IEC 60502-2 and BS 6622. Outer sheath/ JacketOur cables sheaths are made of an extruded layer of PVC or PE material and are in compliance with the requirements of IEC 60502-2 and BS 7655 Specification. We are also capable of providing cable sheaths with special requirements to be. Oil & Gasoline retardent Ozone/ acid/ alkali retardent Flame retardent and in compliance with requirements of IEC 60332-1 and IEC 61034-2 Termite retardent Low smoke halogen free and in compliance with requirements of BS 7211 and BS 6724 Testing of Medium Voltage Power CablesWe Tirupati Plastomatics Cable Company, are capable of performing all standard routine tests and sample tests that are normally carried out in accordance to IEC 60502-2 standards. We have all necessary equipment for such tests such as high voltage labs and special ovens.We are also capable of performing tests in accordance with international or national requirements as agree upon with customers. Routine Tests Measurements of the Electrical Resistance of Conductors Partial Discharge Test High Voltage Test Sample Tests   Conductor Examination Check of Dimensions Hot Set Test for XLPE Insulations In Ht Cables mainly two type of cables are available Single core XLPE Cable Three cores XLPE Cable Characteristics High tensile strength Resistant to chemical and corrosive gases Excellent Electrical and Physical properties Good Ageing Excellent Resistance to Thermal Deformation Not Affected by Vibration Advantage Capability of Carrying Large Currents Free from Height Limitation and Maintenance Ease Of Installation Higher Current Rating Higher Short Circuit Rating Longer Service Life Low Dielectric loss Application For Installations Outdoor in Ground, in Ducts and Indoor on trays Electric power transmission at high voltage Transmission of high voltage in various industrial and commercial applications Transmission and Distribution Instruments, ignition systems, and AC and DC power transmission Power Sector Industrial sector We are also manufacturing High Voltage Cables to IS: 7098 (Part-2).

We are offering 3 core flat cables for submersible pumps.

We are actively engaged in providing XLPE Cables to the clients. The XLPE Cables are manufactured from high grade raw material. The XLPE Cables are appreciated for their reliability and durability. Our XLPE Cables are tested on different parameters like quality and durability. Matching with the international standards, our XLPE Cables are high on demand in the market.

• Brand Name: Hi Tech Cable
• Number Of Cores: 1, 3, 2
• Type: ELECTRIC POWER CABLES
• Condition: New
• Shape: Round
• Insulation Resistance: Yes

LT PVC / XLPE Power Cables are available in different combinations with us, such as Aluminium, Copper Conductors, Round Solid conductor, stranded conductors, sector shaped conductors, taped inner sheath, extruded inner sheath, round steel and Aluminium wire/flat galvanized steel strip armoured/ unarmoured, single/ double outer sheathed, etc. are available. We provide types of insulation that includes - PVC, HR PVC and XLPE. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement of customers.

LT-XLPE cables are manufactured as per IS: 7098 part1 suitable for continuous conductor temperature of 90c and short circuit 250c. ‘DYNAMIC’ LT-XLPE cables have excellent Electrical, mechanical and Thermal properties, surpassing those of conventional polymeric dielectrics . The superior properties of XLPE have led to lower insulation thickness, high current capacity, reduced weight and dimension. ‘DYNAMIC’ LT-XLPE Cable is the economic solution for low tension power distribution with high efficiency and total reliability.

• Color: Black and Red
• Insulation Material: PVC
• Length: 90MTR, 450 MTRS
• Conductor Type: Solid
• Country of Origin: Made in India
• Number Of Cores: 2 Core
• Size: 4.0SQMM - 16SQMM
• Protection Type: Un-Shielded
• Power/Voltage: 1100V
• Brand: KEC
• Wire Gauge: 10 SWG
• Packaging Type: Roll
• Insulation: Yes

• Core Material: PVC, Copper, Rubber
• Brand Name: Havells
• Number Of Cores: 3 Core
• Size: 2.5 Sq mm

We are offering lt-ab cable application dynamic lt ab cables (aerial bunched) cable is a very novel concept in overhead power distribution, as compared with conventional bare conductor in overhead distribution system, ab cables provides higher safety, reliability, lower power losses and ultimate economy by reducing installation, maintenance and operative cost. This superior system is ideal for rural distribution and especially attractive for installation in difficult terrains such as highly areas, forest areas & coastal areas etc. These cables are designed, manufactured & tasted conforming to is: 14255 & other international specifications. Ab cables is also considered as choice for power distribution in congested urban areas in developing urban complex ab cables is a better choicebecause of its flexibility for re-routing as demanded by changes in urban development plan.

Comflex is a leading manufacturer of Submersible Pump Three Core PVC Insulated Flat Cables which play a very important role in working of Submersible Motors. They Work under extreme stress and water submersion conditions and perform consistently over long periods of time Comflex 3 Core Flat Cables are manufactured keeping in mind the severe and difficult conditions they are required to operate. The individual Flexible conductors are made from electrolytic grade bright copper. The wires are drawn, annealed and bunched properly to ensure long life. Each of these three flexible copper conductors is insulated with a specially formulated PVC compound and the cores are laid up in Flat Parallel position. The outer sheath of the cables is made from a 3 Core Submersible Flat Cable in Voltage Grade 1100 V. The PVC insulated and sheathed 3 core flat cables are used for giving electrical connection to the submersible pump motors. These are manufactured keeping in mind the severe, tough and difficult conditions in which they have to operate. The slot available in the tube well being narrow the shape of the cables has to be suited for such an application. These cables conform to and are marked IS 694: 1990 up to 4.0 sq. mm. The sizes above 4.0 sq.mm. cables generally conform to IS 694 : 1990. Distinguishing Features :  Conductor Conductor for Cables are drawn from electrolytic grade copper to ensure compliance with global standards. Annealed conductors are bunched together on custom built heavy duty bunching machines to impart concrete to the conductor. Insulation To manufacture submersible flat cables, the insulated cores are laid up side by side to from a flat oblong shape. Inner cores are coded for identification as per National/International coding system or as per customer’s specifications. Outer sheathing is provided with special soft PVC compound to minimize chances of electrical failure and water seepage which may cause damage to expensive submersible pump motor.   STANDARD COLORS: Red, Yellow, Blue for cores and Black for Sheath. STANDARD LENGTH: 500 Meter in protective Drums. Variable Lengths available as per customer requirements.

We are the renowned Manufacturer and Supplier of high quality PVC Winding Wires. We have a team of experts which has attained expertise in manufacturing and supplying very high quality PVC Winding Wires. The PVC Winding Wire that we manufacture and supply is much in demand in the market owing to the high quality and multiple uses of the product. Features : High grade of material used in manufacturing Durable Cost effective Uses : Highly used for wiring purposes Used in various industries and equipment

EMGEE is one of the leading manufacturers of PVC winding wires in India. EMGEE PVC winding wires are being supplied to all major submersible pump manufacturers and thousands of re-winders within the country and abroad. EMGEE PVC winding wire are manufactured using annealed bare copper wire of electrolytic grade to ensure desired flexibility. The conductor is further insulated with high IR value PVC with uniform thickness by using most modern machinery and extrusion techniques

From marketplaces of Rajasthan(India) to all the others, our organization is capable of providing the product to purchasers as per requirement. Purchase premium-grade submersible wire from us at competitive prices, as we are counted among popular suppliers of the product.

The insulated neutrals and bare earth wires are laid in a concentric layer around the insulated phase conductor with PVC string separators separating the neutral and earths. This is then bound with a clear polyester tape and then PVC sheathed. Split concentric cables are predominantly used by Distribution Network Operators (DNO's) when providing the final service connection to domestic properties. These cables are designed to be installed in air, or for burial in free draining soil conditions.

• Features: Perfect thickness, Fine finish, Precisely insulated

• Conductor Material: Aluminum
• Number of Core: 3
• Packing Type: Roll
• Wire Length: 90 Meter

• Conductor Material: Aluminum
• Color: Black
• Insulation Material: PVC
• Operating Temperature: -40 Deg C to +90 Deg C