Ensol Multiclean Equipments Pvt. Ltd. Nehru Bazar, Jaipur, Rajasthan

Water Tenders that can be used to clean highways after collisions, chemical accidents, or pump water in floods. Our water tenders operate independently and are capable of drafting water from a hydrant, stream, lake etc. These tenders are generally used when there is not a working fire hydrant within reach of other fire equipment, or to give a possibility to supply the fire engine with a very rapid connection. Chassis TATA LP -1613, 2516 / Ashok Leyland -Comet or Requirement Pump Single / Double Stage / Multi – Pressure; Capacity (lpm) -1800, 2250, 3200, 4000 Pressure (kg/cm2) – 7 to 8.5 & 300 lpm at 30 TO 40 (kg/cm2)

Water Bouser that is used in cases of large fires, as its primary role is to get large quantities of water for fighting fire to different locations, to supply water to different fire fighting vehicles , or to act as a static emergency water supply. The bouser also has a demountable pump, which allows the vehicle to be used for quick attack purposes. The vehicle can be filled from any hydrant or other water supply, or open water using the on board pump.

Vacuum Emptier/ Gully Emptier Ensol Vac is an advanced technology for emptying cesspit, cesspool and manhole chambers as well as for cleaning underground drainage, sewer lines etc.   SALIENT FEATURES   It has a simple Suction Operation and is capable of creating very high degree of air pressure which breaks the silt sedimentation that gets accumulated at the bottom of the cesspool and manhole chambers. EnsolVac is also equipped with imported heavy duty Vacuum Pump, Auto Shut off valve, Siphon filter, Safety Pressure release valves and other important safety features. Specific Jetting Operation: This multipurpose machine can be used for cleaning of toilet blocks, foot paths, cleaning/servicing of vehicles and also to extinguish small fires. The water storage tank capacity ranges from 2000 Ltrs. to 8500 Ltrs., and it comes with state-of-the-art workmanship and the best imported High Pressure Water Triplex Plunger Pump of a suitable capacity. Tank Capacity 3500 Ltrs., 4000 Ltrs., 8000 Ltrs. Uo to 20,000Ltrs( as per the specific requirement)     ADVANTAGES   Gully Emptier Machines are meant to clean without anyone having to enter the poisonous/gaseous sewer and manholes thus avoiding any risk of life. Gully Emptier is a highly technical and advanced but user friendly equipment, which comes with all the essential accessories. It is simple, easy and convenient to operate.

SALIENT FEATURES   This equipment can dump the garbage on the Ground, as well as direct in to a Container and also in the Refuse Collector. The capacity of the Auto Remover is 1.0 CuMtrs to 2.5 CuMtrs (Volumetric Cap. Hopper). The dumping height from the Ground is 1000 mm / 1200 mm. It facilitates faster operation     ADVANTAGES   The number of trips can be increased. It is totally hygienic and thus, much safer. It can easily move in narrow lanes. It provides completely covered transportation. Multiple Handling is not required. The segregation of garbage can take place at the source i.e. (Dry/wet), (Organic/Inorganic). This equipment is capable of dumping garbage directly into a big container or Refuse Collector. It speeds up operation allowing the user to cover larger area in short duration.     USEFUL   Small Town Ships, City Council & Big Factories. Direct emptying into container or into refuse collector

Brand Name : Ensol

Ensol Stationary compactor is designed for pressing and transporting cardboard and plastic materials and the municipal waste. The standard produced versions include 10 m3, 20 m3 and 24 m3. The pressing part is fixed to the container. The container has conic sides in order to enable better emptying. The massive single-wing door with rectifiers enables perfect shifting of the pressed waste inside the container. The door can be equipped with rubber sealing in order to prevent the liquid waste leakage. The door is equipped with three hinges ratchet mechanism. This compactor is equipped with the tensing hook (handling hook can be provided upon request). In order to enable simple handling, the press is equipped with four scrolls. The hydraulic system is placed in the container upper right part or over the slide part. The servicing door for the hydraulic cylinders is equipped with a safety switch. A yellow indicator signals that the container is filled at 80%; when 100% filling occurs, the Pressing process automatically stops. The pressing cycle (moving the slide forward and backwards) takes approx 55 seconds. If required, two pressing periods can be set. The times are preset to 10 and 60 minutes as a standard  

       Enquire and View Catalogue View Video   Product Gallery   Previous Next   TECHNICAL DESCRIPTION   Structure:The articulated booms are fabricated of light but stiff M.S. box selection. The Structure is fitted with wide pivot bushes and EN-9/S.S pins for booms as well as hydraulic cylinders. The whole assembly is mounted on heavy duty slewing bearing. Hydraulic RAM: Hydraulic cylinders are of double acting having precision honed tubes and induction hardened, deep grounded, chrome plated EN-8 piston rods providing smooth operation, long steel life and resistance against corrosion. Stabilizers:Two/four powerful double acting hydraulically operated stabilizers are provided with wide footprint to protect the vehicle from top up down. Over travel is provided in the stabilizers to level the vehicle on uneven ground. The stabilizers are fitted with swivel pads and are flush with chassis when retracted. SAFETY ACCESSORIES AND DEVICES   Lock valves to boom cylinders to safe guard operator in case of any hose failure/leakage. Lock valves to stabilizers to safeguard operator in case of any hose failure/leakage. Stabilizer to boom interlocks i.e. booms cannot be operated unless stabilizers are employed. Flasher on driver’s cabin. Spot light in the basket. Emergency hand pump to enable stowing of equipment in case of hydraulic pump/engine failure. Suction strainer to ensure supply of clean oil to pump. Pressure relief valve to protect the hydraulic system from overload. Warming lamp on stabilizer feet to warm on coming traffic. Emergency stop switches at base and basket controls to isolate boom hydraulic function. Slewing:360 slewing are provided by hydraulically through pinion-gear arrangement. The high torque heavy duty slewing bearing on which whole structure is mounted giving smooth slewing operation. Leveling:Parallel linkage is provided to ensure that the operator’s cage remains level in any boom position and there is no lost motion. Operator Cage:A fiberglass cage is mounted on to a steel cradle with non-slip flooring and drain holes for water drainage. The cage is insulated to 600V(tested to 2200V Controls:Dual Controls at base as well as basket are provided to MANIAR hydraulic elevating platform. However, stabilizer controls are provided only at base for safety reasons. Emergency Pump:Emergency hand pump is provided to enable stopping of the equipment in case of pump/engine failure.

Sewer jetting equipment works by the principle of trusting and breaking effects of high pressured water. Any blockage shutting the sewer system is destroyed, thus, collecting and discharging the remaining waste processes are simplified by this operation.

GENERAL TECHNICAL SPECIFICATIONS   Hook lift Case volume: 5 m3-25m3 Container lock system providing carriage security in the event of carriage. Secure side barriers. Telescopic boom movement security system. Load holding valve on pistons in the event of hose tear. Booms made of high resistant iron sheet.

Minimum Working Width 1800mm Dump Angel 400 Main Frame Tubular Frame Made of heavy duty beam structure Material of construction High Grade mild steel Main Brush Drive Drive through tractor P.T.O Linkage to tractor Three Point Linkage System at rear of tractor Wheels Four 8" heavy duty Solid Rubber caster wheels Debris Hopper Attached with main Frame in front of brush , with easy unloading mechanism by hand lever Main Brush Made of Special Steel and Nylon Bristles Brush Drive Tractor P.T.O. Through Angle Gear Dust Prevention Dust Preventing Rubber Flaps on each side of Main Body Dust Control System Water spray system with pump, nozzle provided in front brush to control the dust while sweeping, Water tank capacity 60 Liters.

Ensol Recovery Vans are suited for heavy duty towing and recovery operations. Use of innovative technology gives these vans feature like heat treated pivot pins and components that give it the capacity to withstand stresses. The boom design from C. D. S. tube further strengthens with angle sections that make it a suitable vehicle for on/off road operations. These vans come with a transferable chassis having G.V.W. of varying capacities.

ENSOL, a renowned name in the field of environmental technology, now offers the all new vehicle-mounted, PTO (power take-off) driven ENSOL-OSR System.Various regulations are laid down by relevant government agencies concerning cleaning of oil spills, which need to be adhered, for safeguarding the environment. Until recent years there was no systematic method available for collection of leaked petroleum products, causing substantial environmental damage. ‘With Ensol-OSR ‘, this is a thing of the past! Ensol-OSR consists of a collection tank with 360’ rotatable suction boom and a superior dual cooled (air + water cooled) vacuum pump or compressor system. The power to the system is given from the truck engine through the PTO, creating the required vacuum in the tank for suction of the leaked product. “Ensol-OSR ” comes equipped with a lighting system and an independent power generator, for carrying out operations during night and in remote areas. Other features included in the “Ensol-OSR” are simplified control panel for easy operation reliable top-of-the line hydraulics for driving the system; corrosion resistant collection tank ; convenient storage compartment for tools and accessories (optional) ; and a large assortment of custom built accessories for added efficiency and long term dependability. “Ensol-OSR” Oil Spill Recovery Machines are custom-made in capacities depending on gross vehicle weight (GVW) of truck chassis (suggested tank capacities : 1500 Its. on 5 ton GVW chassis ; 3000 Its. on 10 ton GVW chassis ; 6000 lts. on 16 ton GVW chassis ; 12000 Its. on 25 ton GVW & 3ssis). Maintenance is virtually nil for these rugged machines and at the time when they need to be serviced, our after sales service is just a phone call away!     A SIMPLE CLEANING PRINCIPLE   Once the leakage is detected, the Ensol-OSR unit is driven to the site of leakage. The suction boom (provided at the top of the tank for easy and precise positioning of the suction hose) is rotated and positioned in such a way that the suction hose accesses the leakage spot. The PTO is then engaged to create vacuum inside the tank. Once the vacuum is created, the boom valve is opened and the oil spill is directly sucked into the tank of the Ensol-OSR. Ensol-OSR is then driven to the nearest slop tank, where the contents in the tank are discharged either by switching the vacuum pump to pressure mode or by tipping the tank hydraulically. Ensol-OSR is very simple to operate and requires only one operator for carrying out the complete operation and maintenance with ease.     THE- HEART OF EVERY Ensol-OSR System:   The heart of every Ensol-OSR is provided by quality BATTIONI SPA/JUROP/FRUITLAND or equivalent imported Vacuum Pump. The vane blades of the vacuum pump are of heat-resistant material with dual cooling system (air + water-cooled) to avoid overheating in tropical conditions. Designed for utmost in capability and output, pumps create greater amount of vacuum (95%) for efficient suction and require negligible maintenance.     ADVANTAGES   Can clean oil spills and transfer oil from the slop tanks, where manual operation is virtually impossible. Can pay for itself within one year of efficient use. Maintenance is virtually nil for first few years. Easy to operate as no special skill is required. Elimination of old method of cleaning oil spills, thus upgrading dignity of labour. Can be customized to suit any client’s requirement. Can earn immense revenue from recovery, thereby offsetting the cost of the machine Equipped for night operation Equipped with all the safety features

Nano Jet- Mini Sewer Jetting Machine Mini 3/4 Wheeler Mounted Nanojet is a multi-purpose High Pressure Sewer Jetting Machine Suitable for effective and efficient cleaning of choked underground drainage and sewer lines.   SALIENT FEATURES   It can effectively clean sewer lines having a diameter up to 3″-7″. The pressure exerted by the pump is 200 bar @ 13 lpm. It can also be easily used in narrow lanes.     ADVANTAGES   It can be used for varied purposes such as cleaning of public urinals, toilet blocks, footpaths, color marks on walls, cleaning of vehicle, pesticide spraying application etc. Further, it can be used to extinguish small flames/fire. Low water consumption.

SALIENT FEATURES   Developed on a Tractor- Trailer chassis. The Back-hoe can be extended and the person working on it can rotate in 90 degree direction.     ADVANTAGES   Collects silt, mud, debris etc. from a depth of 5 feet and can accumulate the same in the trailer. Convenient and no skilled person is required to operate. Nalah Cleaner can be develop on any 1 Toner Tata-207, Tempo Trax, Mahindra Pickup with or without collection tray.

Mobile Toilet Van An ideal product developed to meet the adhoc/temporary sanitary requirement of city Areas, Fairs, Camps, Rescue Operations, Health Camps, Place of pilgrims, Sports Festivals & Public Meetings/Gatherings   SALIENT FEATURES   Sturdy trailer to withstand rough use and give lasting service. One trailer carried ten comfortably designed toilets. Non-corrosive and easy to clean stainless steel/Fiberglass toilet seats. All panels made of G.I./Aluminum sheets to avoid rusting. Fiberglass collecting tank is fitted at the bottom to be directly emptied by just opening a value. The toilets can be flushed by jet of water at the end of the day. Clean water tank can be fitted, if required. Specially designed over run brakes are provided for smooth and safe transportation. Sleek appearance No foul smell.

Mobile Toilet Van An ideal product developed to meet the adhoctemporary sanitary requirement of city Areas, Fairs, Camps, Rescue Operations, Health Camps, Place of pilgrims, Sports Festivals & Public MeetingsGatherings

It can effectively clean sewer lines having a diameter up to 3″-7″. The pressure exerted by the pump is 200 bar 13 lpm. It can also be easily used in narrow lanes.     ADVANTAGES   Combination of vacuum/jetting equipment is especially used for sewer systems’ cleaning and drain maintenance purposes. Equipment is mounted on a carrier vehicle in accordance with its technical specifications. By means of trusting and breaking effects of high pressured water, the blockage in canal is destroyed and all the remaining; dirty water, sludge, half-solid waste are collected by vacuum system.     FEATURES   Flushing: A high-pressure water hose with a sewer flushing nozzle is fed into the soiled sewer. The high-pressure water jet dislodges the dirt and flushes it to the gully hole. At the same time, the water jet pushes the hose further into the sewer. Vacuuming: The material flushed into the gully hole is extracted by means of a vacuum system. Solids and water are thus conveyed by the suction hose into the sludge tank. Combined sewer cleaning:If flushing and vacuuming work can be performed simultaneously, we talk of a combined cleaning/vacuuming vehicle. Sewer cleaning with water recycling: Water and solids are separated in the sludge tank. The filtered water is reused for flushing purposes via the high-pressure water pum

A clean environment, collecting waste materials and discharging them from living spaces are all important issues in this era. The method of eliminating the waste material is also as important as the operation itself. Our compression garbage packers just simplify the operation for you and provide an exact solution for your waste collecting problems. Higher the compression ratios we produce; smaller volumes of waste you have! So fortunately, you can save more time, energy and labor force.

International Standard, Made according to EN840-3. Made from 1.5mm Hot dipped Galvanized Sheet. The body parts of the garbage bin thru MIG welding. Deeper combs ensure optimum accommodation on the lifting device robust arms facilitates the use of garbage collection vehicle. Automatic lid opening while collecting waste with vehicle. Body edge & lid designed for protection against rainwater. Smoothly designed interior ensures optimum emptying and easy cleaning. Lid relief spring: Adjustable on site using lid relief spring. Liquid drain duct at the bottom with a cap for liquid drain.   WHEELS   Solid rubber tires. Diameter: 200mm. Max loaded weight: 270KG. Wheel rotation of 360 degrees. Wheel breaking devices (2 units)

Foam Tenders carries 1,800 liters of Flouro protein foam liquid and foam making equipment. It is used for fighting fires that involve flammable liquids . These foam tenders prevent liquid spills from igniting. This vehicle carries high expansion foam for dealing with fires in restricted access areas, such as basements, ship holds etc.

Material : Steel

Ensol Provides technologically advanced vehicle, which conforms all the safety standards. Used for emergency fire fighting these vehicles are designed for easy operations. With high carrying capacities, our vehicles offer superior performance in terms of acceleration, speed, carrying capacity etc. Our array of fire fighting vehicles includes Foam Tender and Emergency Rescue Tender, Water Bouser and DCP Tender.