Heat Transfer Lab Equipment Dealers

Hailing from Roorkee(India), we are engaged in catering to all the customers by reaching their preferred destination. Our team of quality analysts ensures that the offered product is of unmatched standard and free from any kind of flaws.   Range: Thermal Conductivity of Metal Rod Apparatus Thermal Conductivity of Liquid Apparatus Stefan Boltzmann Apparatus Pin Fin In Natural/Forced Convection Apparatus Forced Convection From Horizontal Cylinder Apparatus Parallel Flow/Counter Flow Heat Exchanger Apparatus Counter Flow Heat Exchanger Apparatus Composite Wall Apparatus Lagged Pipe Apparatus Critical Heat Flux Apparatus Shell and Tube Heat Exchanger Apparatus Study of Drop-Wise And Film-Wise Apparatus Unsteady State of Heat Transfer Apparatus Finned Tube Heat Exchanger Apparatus Forced Drought Cooling Tower Apparatus Thermal Conductivity of Insulation Powder Apparatus Thermal Conduction of Liquid by Guarded Hot Plate Method Apparatus Natural Convection From Vertical Cylinder Apparatus Emissivity Measurement Apparatus Specific Heat of Air Apparatus Parallel Flow Heat Exchanger Apparatus Unsteady State of Heat Transfer Apparatus Composite Cylinder Apparatus Heat Conduction Apparatus Pool Boiling Apparatus Two Phase Heat Transfer Apparatus Plate Type Heat Exchanger Apparatus U Tube Finned Heat Exchanger Apparatus Vortex tube Apparatus

• Country of Origin: India
• Brand Name: TNEI
• Material: Metal
• Application: Laboratory

Helical coils are used for heating or cooling in process tanks. When a fluid flows through a curved tube, centrifugal force acting upon the various elements of fluid moving with different velocities causes secondary circulation. Secondary flow results in higher heat transfer characteristics. Further, secondary flow stabilizes the laminar flow leading to a higher critical Reynolds number for transition from laminar to turbulent flow.

• Application: Colleges
• Driven: Electric
• Color: White

1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.

Heat Transfer Lab Equipments Through Lagged Pipe a. Diameter : 50mm150mm InnerOuter (Approx.) b. Length : 450mm (Approx.) c. Material : G.I. d Quantity : 1 No. Each.. 02. Measuring Instruments a. Digital Voltmeter Range : 0 to 300 V b. Digital Ammeter & Range : 0 to 5 Amps c. Digital Temperature Indicator with Selector switch Range : Ambient to 199.9 Deg. C

• Size: all
• Type: ALL
• Brand Name: all
• Place of Origin: PUNE

We are offering In our product range, we offer Heat Transfer Lab Equipments from a pin fin, Thermal conductivity of insulation slab, Stefan Boltzmann Apparatus, Heat transfer through logged pipe, Heat transfer through composite walls, Thermal conductivity of liquids, Heat transfer in forced convection, Heat transfer in natural convection, Thermal conductivity of metal rod, Heat Pipe Demonstrator, Vertical & Horizontal Condenser (steam to water), Vertical & Horizontal Condenser (water to water), Calandria Evaporator, DropwiseFilmwise Condensation Apparatus, Thermal conductivity of insulation powder, Emissivity Measurement Apparatus, Open Pan Evaporator, Shell & Tube Heat Exchanger, Heat transfer in agitated vessel, Single Effect Evaporator, ParallelCounter Flow Heat Exchanger, Unsteady State Heat Transfer Unit, Multi Effect Evaporator, Finned Tube Heat Exchanger.

The most commonly used law of Thermal Radiation is the Stefan-Boltzmann low which states that the thermal radiation heat flu emitted from a block surface (one which absorbs all the incident radiation falling on it) is proportional to the fourth power of the absolute temperature of the surface and is given by the following equation. (qA) Heat flux in WMsq. = σT = eb4 Where, T is the surface temp. which emits thermal radiation in K And Stefan – Boltzmann constant, σ=5.67 x 10-8 WM sq.—K4 eb = Emissivity power of black surface. The Stefan – Boltzmann low can be derived by integrating planks law,

• Features: High performance Superior design Low power consumption User-friendly functions Used high quality raw material Economic prices

Composite Walls Apparatus We are engaged in offering high quality Composite Walls Apparatus to the esteemed customers These apparatuses are manufactured using genuine raw material, under the able guidance of our team of experts. Moreover, we make sure to timely deliver the ordered products at the customers' end, via our wide distribution network.

We are the manufacturer, supplier and exporter of heat transfer lab equipments in natural convection. S.s. Cylindrical tube a. Diameter :40mm b. Length :400mm 02.measuring instruments a. Digital voltmeter range :0 to 300 v b. Digital ammeter & range :0 to 10 amp sc. Digital temperature indicator with selector switch range :ambient to 199.9 deg. C 03. Thermocouples: a. Type :cr. Ai b. Length :1 mtr. 05. Electronic dimmer :1 no.

• Diameter: 0.3 m
• Thickness: 0.012 m
• Dimmerstate: 1000 watt

Total heater assembly comprises of a heater bound between two aluminium plates, on both sides of this heater identical structures of composite wall are placed. Thermocouples are provided at proper position in the composite wall to record desired inside temperature of composite wall. Multichannel temperature indicator is used to measure this temperature. Small hand press provided to press the wall on each other & to ensure that no air gap remaining between two plates. Heat input to heater is given through a variance & measured by voltammeter & ammeter. By varying heat input & combinations of the composite structure wide range of experiment can be performed.

Determination of Emissivity of non black surface. • Study of variation of Emissivity of test plate with respect to absolute temperature. • Measurement and variation of electrical input with complete panelised instruments. • Elimination of instrumental error by using same measuring instruments for both the plates. • Digital Voltmeter, Ammeter & Temperature Indicator. Space Required : 1m. x 1m.

The setup consists of a brass tube fitted in a rectangular duct in a vertical fashion. The duct is open at the top and bottom, and forms an enclosure and serves the purpose of undisturbed surrounding. One side of the duct is fitted with a transparent good quality Acrylic window for visualization. An electric heating element is kept in the vertical tube that in turns heats the tube surface. The heat is lost from the tube to the surrounding air by natural convection. The temperature of the vertical tube is measure by Temperature Sensors and displayed by a Digital Temperature Indicator with multi-channel switch. The heat input to the heater is measured by a Digital Ammeter and a Digital Voltmeter and is varied by a Variac. The tube surface is polished to minimize the radiation losses.

• size: 200 mm x 75 mm
• Temperature: 0-199.9°C

Heat transfer lab equipment, Stand Alone Metallic powder coated panel. An industrial Plate Heat exchanger made of SS of size 200 mm x 75 mm, Number of plates are 14. Both Parallel and Counter Flow. Over All Heat transfer Co-Efficient, Effectiveness. Self explanatory Instruction manual with sample calculation.

To determine heat transfer rate, heat transfer coefficient, LMTD. The unit consist a two design ,mild steel shell houses the copper pipes. End box for shell which carriers a baffle at the center to make the heat exchanger of two pass type. cold fluid passes out side the tubes in the shell. Hot water flows inside the tubes. Temp. of hot water & cold fluid measured by thermometer.flow rates and temp. of hot and cold fluid can measured.

High temperature chamber.Preheating temperature range ambient to + 200°C. About 25 minutes. Low temperature chamber.Pre cooling temperature range -40... To -70°C. About 120 minutes. Microprocessor based PLC controller with inbuilt memory, communication software with windows xp support, electric screw drive lifting arrangement.

The apparatus consists of main central heater and ring guard heater, sandwiched between the specimens. Cooling plates are provided on the either side clamped between heater and cooling plates. Ring guard heater ensured unidirectional heat from the flow through specimen.

The experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. A cylindrical shell filled with insulating material surrounds the middle portion of the bar. The temperature of the bar is measured at different sections. Heat Input to the heater is given through variac. By varying the heat input rates, data can be obtained. Water at constant rate is circulated through the jacket and its flow rate and temperature rise is noted.

Microteknik is a reputed name in manufacturing and supplying business of Engineering Models brings you a variety of Heat Transfer Lab Equipments with unparalleled quality and competitive price range. Our products designed by our qualified team include: Heat Transfer Through Composite Wall, Thermal Conductivity of Insulating Powder, Heat Transfer in Natural Convection, Parallel Flow/Counter Flow Heat Exchanger, Unsteady State Heat Transfer Unit, Heat Transfer in an Agitated Vessel.

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. Following the strict packaging guidelines, we make sure that the range of products we offer are packed sternly to evade lossdamage. By this, we ensure that the products are in safe condition during handling, warehousing and transportation.

These equipments can be availed for educational purposes in school, college and university labs as well as for industrial applications. Products are shipped from well-known traders to ensure time tested quality products. The setup consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either sides of heater, which forms a composite structure.