Industrial Wires Dealers in Jaipur

• Country of Origin: India

• Material: Plastic
• Application: Hospital
• Color: White, Orange
• Display Type: Analog
• Automation Grade: Manual
• Torque Range: 9 to 14 Inches

We are offering a wide range of Guide Wire.

We share a forefront with the famed organizations, supplying superior quality Gemini Installation Cables at affordable rates. We have hired expert warehousing personnel who keep a stringent check on the entire range of stored lot ensuring zero damage to the products till the final dispatch to the clients.   Construction : installation_vertiConductor - Solid annealed bare/tinned copper wire of 0.4, 0.5, 0.6, 0.7 or 0.9mm.Other sizes on customer’s request. Insulation - PVC/Solid polyethylene/Nylon. Single coloured conductors have fully color-coded insulation. Bi-coloured conductors are produced by printing of coloured rings on the coloured insulation. Cable Assembly - Components are assembled in concentric layers or in units for higher pair sizes. Core Wrap - One or more plastic tapes. Screen - If required, pairs/triads/quads can be individually or overall screened or both. Screening by Copper/Aluminum Mylar Tapes with minimum 30% overlap. Drain Wire - If required, solid tinned copper wire of 0.5 mm. Outer Sheath - PVC Black/Grey.

• Current Rating: up to 1 A
• Insulation Type: PVC

This is a set of 10 rainbow color male to female jumper wires. They can be used for interconnecting electronic components on breadboard or berg strips. The wires are 20 cm long. One side has a male header and the other end is a female header. These male to female jumper wires are of good quality, reusable and has an approximate length of 20cm.

Our company is a highly acclaimed Manufacturer of PVC Cables from Rajasthan, India. We ensure that only certified components are used for fabricating the cable in compliance with set industrial parameters. These PVC Cables offered by us are extensively used for electrical installations in commercial or residential area. We are capable of delivering bulk orders of PVC Cables to customers across the world.

• Type: Pvc Insulated Cables

We are widely acclaimed for offering LT PVC Power Cables that are designed and manufactured with Polymer Dielectric to bear thermal and thermo-mechanical stresses safely at continuous normal and short circuit temperature conditions. LT PVC Power Cables, provided by us, use PVC compounds that take care of overload and short circuit current with both coarse and fine protection system. Also, LT PVC Power Cables of 1.5/2.5 sq. mm control cables are supplied up to range of 61 croes as per the relevant specifications. We supply LT PVC Power Cables that are provided with PVC insulation as per the requirement of the process of specification. Advantages DurableDesigned for rough useLow maintenanceEasy usage

We are among the major players in the market offering top-notch PVC Cables and that too at marginal prices. We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver finest range of products. Features: Sturdy construction Finely finished Reasonably priced

COmflex Cable Industries is a leading manufacturer of Industrial Flexible Multi Core Armoured Power Cables such as PVC Armoured cables, PVC Insulated Copper Armoured Power and Control Cables, multi core steel wire armoured cable, Copper Armoured Cables, LT Control Cable, industrial power cables, HT Cables, Double Shielded Cable from Jaipur. The steel wire armoured cable is a power and auxiliary control cable, designed for use in mains supply electricity. Armoured cables are used in applications where cables will be exposed to mechanical or environmental damage under normal operating conditions. These applications include power circuits in underground systems, cable networks, power networks, outdoor and indoor applications, industrial plants, commercial buildings, processing plants and central and substation utility applications and cable ducting. We manufacture premium quality multi core steel wire armoured power cables with copper conductor and steel wire cladding for various industrial applications. Comflex Industrial Armoured Cable is an exceptionally durable cable that may be used where maximum performance is demanded with High strength, Excellent conduction rate and Abrasion proof. Manufactured as per the standards and norms of Indian and international markets using pure annealed copper conductors in the SWA armoured industrial cables conforming to the requirements of customers. Distinguishing Features : Conductor: Conductor for Cables are drawn from electrolytic grade copper to ensure compliance with global standards. Annealed conductors are bunched together on custom built heavy duty bunching machines. Insulation: Inner cores are coded for identification as per National/International coding system or as per customer’s specifications. Inner Sheath: Cables having two or more cores are provided with a common inner sheath applied either by PVC extrusion or by with PVC tape. Armouring: The armour is of round galvanised steel wires or flat galvanised steel wire designed to give mechanical protection, which is why the cable is often used for external use. The Armour is used to reduce any risk of the cable getting pinched or damaged; the steel is used to protect the armoured cable. Outer Sheath: The outer sheath is of PVC conforming to the requirement of standards or customer. The colour of outer sheath is generally black or grey.   STANDARD LENGTH: 500 Meter in protective Drums. Variable Lengths are available as per customer requirements. Note: The Conductor construction given above is indicative only and will be such that all requirements of strand diameter and conductor resistance as per IS:694 and IS:8130 are met. Comflex Cable Industries will not be liable for damages arising due to incorrect installations.   Specifications: Single core Red, Black, Yellow or Blue 2 core Red and Black 3 core Red, Yellow and Blue 4 core Red, Yellow, Blue and Black 5 core Red, Yellow, Blue, Black and Grey. Conductor Construction: Copper Sq. mm.Solid /StrandedFlexibility Class 1 to 1.5 Solid Class 1 as per IS:8130/1984 2.5 to 6 Solid / Stranded Class 1 /Class 2 as per IS:8130/1984 10 and above Stranded Class 2 as per IS:8130/1984 Insulation as per IS:5831/1984: TypeApplicationPVC CompoundMax. Conductor Temperature A Insulation General Purpose PVC (GPPVC) 700 °C C Insulation Heat Resistance PVC (HRPVC) 850 °C

• Material: Copper
• Voltage: 220 V
• Type: Double Insulated Cable
• Size: 6 Sqmm
• Temperature Range: 90 DegreeC
• Ideal For: Solar Generator, Solar Panel
• Insulation Material: PVC

PVC copper wires are used extensively in making power transformers, panel boards, electric motors, etc. We offer an exclusive range of PVC insulated wires, power cable and electrical power cable for use across various domains.

• Type: CU/PVC
• Brand Name: Gemini
• Number of Core: 1 Core
• Standard: BS 6004
• Conductor: Flexible Class 5 Copper Conductor to BSEN 60228
• Insulation: PVC Type T1 1 to EN50363-3

LT PVC / XLPE Power Cables are available in different combinations with us, such as Aluminium, Copper Conductors, Round Solid conductor, stranded conductors, sector shaped conductors, taped inner sheath, extruded inner sheath, round steel and Aluminium wire/flat galvanized steel strip armoured/ unarmoured, single/ double outer sheathed, etc. are available. We provide types of insulation that includes - PVC, HR PVC and XLPE. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement of customers.

We bring forth well-designed PVC Insulated Cables for the clients. We use high-grade PVC for the manufacturing of PVC Insulated Cables. The PVC Insulated Cables are highly safe to use and shock resistant. The PVC Insulated Cables are therefore high on demand in the market. Our PVC Insulated Cables are provided at market leading prices to the clients.

  Fire Resistant / Fire survival – Applicable Standards British Codes and Specifications BS 8519:2010 :Code of practice for Selection and installation of fire-resistant power and control cable systems for life safety and fire-fighting applications.BS 5839-1:2008 :Code of practice for system design, installation, commissioning and maintenance – Fire Detection / Fire Alarm systems for buildings.BS 5839-8:2008 :Code of practice for the design, installation, commissioning and maintenance of Voice alarm systems.BS 5839-9:2011 :Code of practice for the design, installation, commissioning and maintenance of Emergency voice communication systems.BS 5266-1:2005 :Code of practice for the emergency lighting of premises.BS 7629-1:2008 :Specification for thermosetting insulated, unarmoured, screened fire-resistant cables of rated voltage 300/500V, having low emission of smoke and corrosive gases when affected by fire.BS 7846:2009 :Specification for thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1000V, having low emission of smoke and corrosive gases when affected by fire.BS 8491:2008 :Method of assessment of fire integrity of power cables with diameter greater than 20mm (as per BS 8519:2010). Retain Circuit integrity at 600/1000V under Simultaneous application of constant Flame at 850°C, Direct Mechanical Impacts & High Pressure Water Jet. The test duration is expressed in minutes depending on the required time duration of the application as follows: Category 1 :30 minute Category 2 :60 minute Category 3 :120 minute BS 8434-2:2009 :Fire performance “Enhanced Test” as per BS 5839 Part 1, 8 & 9 (For conductor size upto and including 4sq mm) Method for assuessment of fire integrity of small cables for use in emergency Circuits. Retain Circuit Integrity at 930°C.Duration of test is 120 mins. Initial 60 mins. with Fire and Impact followed by an additional 60 mins. with Fire, Impact and Water Phase.

The exceptional OD Tolerance of these Fiberglass Cables has made them the best alternative to the traditional cables. These Fiberglass Cables are manufactured using premium Mylar Sheathing that has a varnish coating as per the demands of clients. We have become a reputed name to offer high-class Fiberglass Cables that are used in electrical and electronic appliances. Highlights High resistance to temperature Available in diverse thicknesses

• Core Material: PVC, Copper, Rubber
• Brand Name: Havells
• Number Of Cores: 3 Core
• Size: 2.5 Sq mm

It is apparent that quality of any product depends on the materials that are being used in its production. If superior quality materials are being used then without any doubt, product would be able to deliver a consistent performance. Though there are available many companies which are indulged in the production of braided flexible connectorsjumpers, but when it comes to offer superior quality braided flexible connectors then Ganpati Wires exceed the expectation of end-users. We do take into consideration the most important factor of customization as flexible connectors are designed by keeping in mind the specific requirements of users and the areas of applications.

Low Voltage cables are used to supply power to large motors and other industrial equipments. These cables are manufactured for a voltage range of 1kV to 3.3kV for IEC and BS specifications. Electrical power, lighting and internal wiring in households, industrial and administrative buildings, agricultural premises, switchgear and distribution boards

• Color: All different Color
• Feature: Crack Free, Durable, Heat Resistant, High Tensile Strength
• Type: PVC Armored Cable
• Voltage: 1 kv
• Conductor: Copper