2x2x2 ft MS Fume Cupboard
Get Price Quote
1 Piece (MOQ)
Specifications Ergonomic design for versatile usage, ease of use, plug & play system. International Standards – UK Complied Certifications – ISO 9001:2015, CE. GMP. Company is under Make in India & MSME Certified with International standard, certified model with duly mentioned brand name. Material of Construction – Outer Body- CRCA Sheet epoxy Powder coated worktable also. Inner body PP Sheet wrapping for chemical resistance. Working Chamber Size – 2x2x2 ft Front door – Counter balanced weight with 5 mm toughened/tempered glass UV – protected to protect customer from any Exposure – complete transparent along with base structure to hold the cabinet & ease of access Air flow type – Auto Bypass Type , Design-Aerodynamic Baffle arrangement – Interstitial 3-point suction system (for light, normal & heavy fumes) with baffle to ensure smooth and immediate exhaust of fumes. Baffle with Additional holes for better suction. Plenums are designed and adjusted ergonomically. Front SS -304, Hand rest/Air foil with suction point below & Door top suction point. Centrifugal Blower – Silent high efficiency remote blower, consisting of continuous rating motor and chemical resistant impeller. Air Suction Capacity – 800-1000 CFM confirming to international (0.5mtr/sec) face velocity norms and as per safe fume hood airflow pattern. Statically balanced motor blower Assembly (Heavy Duty), 1440 rpm, ¼ hp. Noise of the blower is less than 55 dBA & Very low vibration, internally built in. Sink with Water tap with drain arrangement – All are PP Materials. 3 OR 4 NOS Service Valves – Water/Air/Nitrogen/Gas/Vacuum – remotely controlled with internal and external inlet and outlet nozzles, color coded – Completely PP Coated Top removable panel for easy access to electrical fittings and easy removable fittings placement for ease of access during service. Level adjusting screws – Made of SS Bolts to adjust the fume hood level by approx. +10 mm. Exhaust Port – Top/Side – Smooth exhaust without any turbulence , PVC L bent supplied along with the machine for exhaust connection from the Lab Apparatus/Chemical Storage Base Cabinet – Base cabinet ready to receive the fumehood at its top with following features : Complete rigid structure to support Fume hood. Epoxy powder coated rigid structure. Front and back door for ease of access towards storage materials Hinged doors – Front Opening Side shelves for storing of consumables Power supply – 220-230 V, 50-60 Hz, 5/15 amps power cord. Optional Electricals fittings & Fixtures : Microprocessor based PID Controller –FL light ON-OFF, Blower 3 speed control – High, Low, Medium Fluorescent light – 20 watt, ˃800 lux, with chokes for lighting 1/2/3 set of electrical panels –each consist of 2 nos of 5/15 amp plug points with switches.
Laboratory Fume Hood
25,000 - 500,000 Per Set
1 Set(s) (MOQ)
Best Deals from Laboratory Hood
Pro Modular Fume Hood
Get Price Quote
1 Piece (MOQ)
Bench Top Fume Hood
150,000 - 175,000 Per piece
1 PIECE (MOQ)
Walk In Fume Hood
1 - 2 Per Piece
1 Piece (MOQ)
We are engaged in the manufacturing and exporting of Walk In Fume Hoods in the global markets. Our Walk In Fume Hoods have earned a huge admiration of the clients for providing efficient functioning and assured results. Why Our Walk In Fume Hood ? Apt for laboratory procedures that require Cumbersome equipment Maximum work area Directly mounts on floor Uses the laboratory floor as the bottom work surface Optionally Granite will be provide on request Provided with Water tap Gas service fixtures Easy moving sash Appropriate illumination arrangement To ensure safety, inspected annually Designed in conformity with the industry standards Used For Protecting laboratory from hazardous chemical gas and acid fumes Types Bench-Top Fume Hood Platform Mounted Fume Hood AAS Hood Distillation Low-Height Fume Hood Walk-In Fume Hood Small Fume Hood Applications Biotech labs Chemical industry Research centers Pharmaceutical labs Educational institutes Paint and oil industry
Laboratory Fume Hood
107,000 Per Piece
1 Piece (MOQ)
0.0
Website
PP Fume Hood
Get Price Quote
1 Piece (MOQ)
FRP chimney FRP Fume cupboard
30,000 - 33,000 Per piece
Our FRP Fume Hood is primarily designed for removing the hazardous fumes and gases from the various Industrial processes. We are a reliable FRP Fume Hood Manufacturer and Supplier in India. Our FRP Fume Hood is known for qualities like non-conductive, chemical resistant, corrosion proof, precision design and accurate functioning. Our FRP Fume Hood is used for protecting the laboratory from hazardous chemical gas and acid fumes
Fume Hood
1 Per Piece
1 Piece (MOQ)
Volume Of ExhaustOur fume hoods are capable of maintaining a constant exhaust volume. The maximum variation permissible due to baffle adjustment, in our in house test procedure is 6% of the given volume of exhaust.Pressure (Static)Our fume hoods are designed to minimize the loss of static pressure at a given baffle opening position.Noise/Sound LevelsOur fume hoods are designed to generate lower noise levels. The performance of our fume hoods are rated better than the industry standards of 75 db, at approximately 15 cm distance from the sash.Sash Counter Balance SystemsChain & Sprocket Systems - Typically a hardened chain (similar to a bicycle chain) runs over pockets to the counterweight.The sprockets are attached onto a single axle which allows them to turn at the same time.This system will travel smoothly no matter where the user chooses to lift the sash along the hood width. This is especially important on longer hoods where the user may be lifting the sash at one end.FRP Generally Used For Highly Toxic Chemicals Like Sulphuric Acid, Hydrochloric Acid, Nitric Acid Are Using In Fume Hood.
Fume Hood
Get Price Quote
10 Piece (MOQ)
Laboratory Fume Cupboard
86,000 Per Piece
1 Piece (MOQ)
Fume Hood
Get Price Quote
Fume hood can reduce or eliminate exposure to volatile liquids, dusts, and mists The fume hood is often the primary control device for protecting laboratory workers when working with flammable and/or toxic chemicals. Hoods protect workers by: Containing vapors, dusts, gases, and fumes generated within the hood, and removing them as air flows into the hood and then out via the laboratory exhaust system. Features : Outer body of fume hood is made of mild steel duly powder coated Work table is made of 0.8 mm thick stainless steel 304 sheet or 16 mm thickness Granite slab. A sliding door of aluminum frame fitted with full view clear glass moves vertically up/down with counter balanced weight operated by steel rope Hose is provided with fluorescent light for easy working in the chamber and a storage cabinet is also provided for storing of material A 6/16 Amp socket and switch is also provided in hood for providing electric supply to small devices – hot plate, magnetic stirrer, etc used in hood The control panel is fitted with on/off switches for mains, motor-blower, tube light and socket Machine requires 230V, Single Phase, 50 Cycles, AC power supply Optional : Fume Duct and exhaust line – PVC or HDPE as required Inner chamber made of SS 316 and outer made of SS 304 Small SS sink or PP sink with water tap and water drain outlet fitted on work table Colour coded utility service remote control valve 2 nos for air (nitrogen, oxygen, etc) & water knobs are mounted on front side of hood outside the working chamber. Nozzle is fitted inside the chamber. Stream lined airfoil made at the bottom of hood work table opening for smooth flow and avoiding turbulence inside the hood. SS grid fitted inside the work chamber Inner Cabinet Dimensions : 2’ x 2’ x 3’ 3’ x 2’ x 3’ 4’ x 2’ x 3’ 5’ x 2’ x 3’ 6’ x 2’ x 3’
Fume Hood
36,000 Per piece
1 Piece (MOQ)
Fabricated out of a thick wooden board. It is designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. The working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counterbalanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front-facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220/230 volts A.C. supply. Working chamber size: 90x60x60cm 120x60x60cm 120x75x75cm 150x75x75cm Product Details : Whole cabinet made of wooden board laminated with sunmica Whole cabinet made of Cold Rolled steel duly powder coated Whole cabinet made out of Stainless Steel. OPTIONAL : High CFM Exhaust System( for duct exceeding 10 feet in length ) PVC Fume Duct (per ft.)
Fume Hood
Get Price Quote
Laboratory Fume Hood
85,000 Per Piece
1 Piece (MOQ)
0.0
Website
Laboratory Fume Hood
90,000 Per Piece
1 Piece (MOQ)
Fume Hood
120,000 Per Piece
1 Piece (MOQ)
Broadly used for throwing out harmful & toxic fumes, this product is widely used in pharmaceutical industries, research institutes, laboratories, etc.we provide this Fume Hood in various sizes and which can also be customized as per our clients requirements. These fume hoods have a choice of vertical or horizontal sliding sash and MS or stain less steel construction. Our product range includes general purpose fume hoods, ductless fume hoods, and mobile units; designed with number of optional features and specifications required to meet critical challenges in laboratory research areas worldwide. Features: Fume exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases. vapours, mist etc. to protect’ personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it into the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant. Dartboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed electric plug is also provided to work on 220/230 V AC 50 Hz power plug. Specification: Durable and chemical-resistant construction High performance centrifugal blower Powder Coated MS / SS Ductless design Double wall construction Easy to clean surfaces Vertical or horizontal sliding sash Efficient fluorescent lighting Energy saving blowers Exhaust System : Motor Blower Assembly Covered with G.I Sheet
laboratory fume cupboards
Get Price Quote
Fume Hood
50,000 - 100,000 Per Piece
1 Piece (MOQ)
Fume hood use in laboratory and chemical company
Fume Hood
Get Price Quote
1 Piece (MOQ)
“TEMPO” make fume hood is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapours or dust. Air is drawn from lab space into the fume hood then dispersed via a pipe to the outside atmosphere. Basically, it protects the user from inhaling toxic gases. Application Chemical lab Food manufacturer Drugs manufacturer company Paint manufacturing company Rubber industry Polymer industry Cement industry Construction Exhaust system Centrifugal blower with anti coregent coating Low noise blower Material of construction Double wall construction Inner body PP and outer body MS powder coated Inner body fibre and outer body MS powder coated Smooth black granite table Features Electrical socket Thich toughen glass window Vertical opening Sash Fluorescent lamp Centrifugal blower with Anti coregent coating Optional Features Tap for gas Tap for water Sink for water Castor wheels Storage cabinet at bottom PVC ducting pipe
Post Free Ad
