Neo Paintchem Pvt. Ltd. Vaishali Nagar, Jaipur, Rajasthan

Brand Name : Neo Plast

Application : Cement Wall Putty

Color : White

Feature : Long Shelf Life, Weather Proof

Form : Powder

Packaging Type : Standard

Packaging Size : As Per Buyer's Requirement

Repairs it is based on synthetic rubber emulsion which providers good adhesion and water resistance to mortar/ concrete. Suitable old & new concrete bonding, water proofing screed concrete, waterproof slurry coating for repairing. Conforms to IS:2645 Easy to use Non toxic Inhibits crack formation due to increased flexibility Seals small capillaries as a water proofing material improves the mechanical chemical resistance good binding property

Brand Name : Neo Plast

Type : Stone Adhesive

Material : Chemical

Application : Stone Sealing

Color : Off Yellow

Feature : Antistatic, Waterproof

Adhesive : Acrylic Based

Brand Name : Neo Plast

Certified, normal-setting, eco-friendly, self-levelling mineral product for the high-performance corrections of irreqular, uneven substrates, ideal for use in Construction, recyclable as in inert material at the end of its life.   Product Strengths: SLC develops high levels of resistance to the solvent action of water, making it possible to correct large surface, also on external floors or those in contact with humidity to allow them to be overlaid with flooring using eco-friendly adhesives. Internal, external HDE technology with extended flow High dimensional stability and long-lasting performance High mechanical resistance Long self-levelling time, also suitable for large surface areas Suitable for laying ceramic tiles, vitrified tiles, natural stone hardwood floors and resilient materials using adhesives 

Brand Name : Neo Plast

Coverage : 1.6 kg./m² per mm of thickness (Approx) •

Packaging Type : Plastic Pack

Packaging Size : 20 Kg

Application : Construction

Certified, thixotropic, eco-friendly, normal-setting mineral levelling product for the high-performance correction and extended work ability of irregular substrates, ideal for  use  in  Construction. With  very low  volatile organic compound emissions, recyclable as an inert material at the end of its life.    Product Strengths: Internal, external Suitable for laying ceramic and vitrified tiles, natural stone, hardwood floors and resilient materials using adhesives Prolonged work ability, also suitable for large surface areas High level of work ability for rapid and safe application High dimensional stability and long-lasting performance  High mechanical resistance 

Brand Name : Neo Plast

Product Strengths: Internal, external Low water/cement ratio Mechanical performance superior to those of portland cements High dimensional stability and long-lasting performance Prolonged work ability both in the manual and mechanical laying    Suitable Substrates Concrete walls & ceilings Clay brick walls Concrete hollow brick walls Cement block walls AAC Block walls   Coverage : Approx 6-9 ltrs of water are needed for an idel mix. Adjust the water content depending on the site conditions. (Coverage depends on the plumb, evenness of wall and mix consistency

Brand Name : Neo Plast

Thickness : 12 mm, 20 mm

Coverage : 20 - 22 sft., 12 - 14 sft.

Application : Construction

Packaging Type : Plastic Pack

It is water based high performance universal root system specifically developed for long term protection of all types of roof surface. It is formulated on a complex blend of acrylic resins reinforced with inorganic fibers which offers outstanding weatherproofing and waterproofing properties. Optimum leves of UV resistance, flexibility, adhesion and durability for nay roof surfaces. Easy Application : Single  component - water based resulting easy application andcleaning of tools. Long term flexibility : Remain permanently flexible upon extended exterior exposure. Water Based : No V.O.C. environment friendly High Flim Build : High Volume Solids allows high build coating.

Brand Name : Neo Plast

Density : 1.35 kg/ lit.

Neo Admixture is a high performance liquid concrete admixture formulated from selected polymers specially  designed to enable the water content of the concrete to perform more effectively. This effect can be used to improve work ability and to increase ultimate strengths by the very high levels of water reduction in the concrete mix.   Applications To increase workability retention on of fresh concrete. To provide increased ultimate strength by reducing water demand in concrete mixes. To produce high quality concrete of improved durability by reducing permeability.   Advantages Higher strength with same cement content. Minimizing segregation on problems by improving cohesion. Improved workability reduces placing and compaction problems.  Cement saving without affecting strength.  More durable concrete as a result of reduction in permeability and lower water to cement ratio  Chloride free.   Compatibility Neo Admixture can be used with all types of Portland cement and cement replacement materials. Neo Admixture is compatible with other Neo admixtures used in the same concrete mix. If more than one type of admixture is to be used in the concrete mix, they must be dispensed to the concrete separately.   Standards Neo Admixture complies with ASTM C494, Type G and IS9103:1999; reaffirmed 2008.   Method of Use Neo Admixture should be added to the concrete with the mixing water to achieve optimum performance. An automatic dispenser should be used to dispense the correct quantity of Neo Admixture to the concrete mix.   Technical Properties @ 25 C: Colour - Brown liquid Freezing point - ≈-2°C Specific gravity - 1.20 ± 0.03 Chloride content - BS5075 Air entrainment - Typically less than 2% additional air is entrained above control mix at normal dosages   Dosage The guidance dosage of Neo Admixture is 0.80 - 2.60 litre/100 kg of cementitious materials in the mix, including GGBFS, PFA or microsilica. Representative trials should be conducted to determine the optimum dosage of Neo Admixture to meet the performance requirements by using the materials and conditions in actual use.   Effects of Over Dosage   Over dosing of Neo Admixture will cause the following: Significant increase in retardation. Increase in workability   Ultimate concrete strength will not be adversely affected and will generally be increased provided that proper concrete curing is maintained.   Setting Time Although the setting time is dependent on the dosage of Neo Admixture, the following factors should be considered Retardation is increased with lower levels of tri-calcium in the cement. Lower temperatures will delay the setting time. SRC cement gives higher retardation level than ordinary cement. Using more than one type of admixture in the same concrete mix could affect the setting time  Retardation level is increased when cement replacement materials are used in the concrete mix.   Cleaning  Neo Admixture can be washed with fresh cold water.   Packaging Neo Admixture is available in 20 kg, 50 kg and 200 kg carbuoy/drums supply.   Storage Neo Admixture has a shelf life of 12 months from date of manufacture if stored at temperatures between 2°C and 50°C. If these conditions are exceeded, Neo Technical Department should be contacted for advice.   Cautions Health and Safety Neo Admixture is not classified as hazardous material. Neo Admixture should not come into contact with skin and eyes. In case of contact with eyes wash immediately with  plenty of water and seek medical advice promptly. For further information refer to the Material Safety Data Sheet.   Fire Neo Admixture is nonflammable.

Product Strengths: Can be diluted in water in any ratio Suitable for use with compact and porous materials  Suitable for delicate marbles No toxic substances released 

Brand Name : Neo Plast

Coverage : 0.1 - 0.3 l /m² (Approx)

Description: It is ready to use economical component for making hard floor surfaces.  It is suitable for use in warehouse in engineering workshops, parking lots, garages etc. 

Type : Floor Hardener

Color : Cement Grey

Raw Material : Cement

Country of Origin : India

Brand Name : Neo Plast

Application : Construction

Brand Name : Neo Plast

Brand Name : Neo Plast

It is a epoxy based, 'solvent free two component, highly thixo-tropic, non-sag adhesive specially formulated to meet the requirements of bonding prefabricated concrete segments. It is available in various grades as per temperature range suct as 15-35°C or 25-45°C. High adhesive to damp and dry concrete surface. Excellent bonding properties. Setting unaffected by humidity. No shrinkage Excellent squeezability. Easy to Apply.

Color : Creamy, Off Yellow

Feature : Antistatic

Country of Origin : India

Brand Name : Neo Plast

Certified, mineral adhesive for high-performance, high-deformation layingor overlaying with no vertical slip, ideal for use in Construction, Single-component with very low volatile organic compound emissions, recyclable as an inert material at the end of life.   Product Strengths: Setflex EN 21 TA white contains pure white recycled raw materials and has reduced CO2 emissions Suitable for vitrified and ceramic tiles, large formats, low thickness slabs and stable natural stone Floors and walls, for internal and external use SAS and STC technology guarantee adhesion for real on-site conditions Suitable for under floor heating systems

Certified, mineral adhesive for high-performance, high-deformation layingor overlaying with no vertical slip, ideal for use in Construction, Single-component with very low volatile organic compound emissions, recyclable as an inert material at the end of life.   Product Strengths: Setflex EN 21 GR white contains pure white recycled raw materials and has reduced CO2 emissions Suitable for vitrified and ceramic tiles, large formats, low thickness slabs and stable natural stone Floors and walls, for internal and external use SAS and STC technology guarantee adhesion for real on-site conditions Suitable for under floor heating systems

It is a factory blend of carefully selected raw materials, portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying aerated light blocks or smoothing over the block work surface in layers of upto 12mm thickness, that  meet and  exceed the requirements of National and international Standards.   Advantages Long working time No curing required after block work is done Improved adhesion between two blocks Fast & economical    Suitable Substrates : Concrete blocks Cement mortar blocks/bricks Concrete hollow blocks  Aerated light weight blocks Cellular concrete blocks Fly ash bricks   Coverage:  Approximately 125 sq.ft. per 40 kg. bag when used at 2-3mm bed thickness. Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 25% water added to powder    Note: Coverage is based on the block size of 650mm X 240mm X 100mm

Country of Origin : India

Brand Name : Neo Plast

Cement Waterproofing Slurry A Cement based two component polymer rich system, which on mixing yield a brush able smooth slurry with excellent bond to most substrate. It is applied to concrete & Mortar structures to prevent water infiltration & dampness Easy to apply by brush, slurry consistency Improve bond strength on variety of surfaces Easy & Fast Mixing Reasonably Flexible to bridging up to 0.3 mm crack width. Protects against water penetration, salt & carbonation. Non-Toxics when cured, suitable for contact with drinking water Non-Corrosive to steel & iron. Allows surface to breath, preventing build up vapor pressure.        Coverage: Depending on type of application, 2 coats are always required. The minimum recommended coverage of LARSEN CLEAN TECH WP 104 is 2.0 kg/m² for 1 mm thick coating, In extreme cases three coats may be required. 

Brand Name : Neo Plast

Packaging Type : Can

Product Strengths: Floors and walls, for internal and external use Thickness up to 10 mm Suitable for laying single and double-fired ceramic tileson mineral or cement-based substrates. Open time >= 30min Adjustability time >= 40 min

Type : 1208 Standard Set Flex Tile Adhesive

Product Strengths: Floors, for internal and external use Adjustability >= 30 min Suitable for laying ceramic, vitrified and double-fired tiles and stable natural stone Thickness up to 10 mm

Product Strengths: Floors & Walls for Internal & External use Deal for Laying Aqua Expert systems Suitable for vitrified and ceramic tiles, large formats, low thickness slabs and stable natural stone Floors and walls, for internal and external use SAS and STC technology guarantee adhesion for real on-site conditions  Suitable for under Floor Heating Systems

Product Strengths: Certified, mineral adhesive for high adhesion high-performance laying with no vertical slip,ideal for use in Building Construction. Single-componemt with very low volatile organic compound emissions.   Set flex 101 develops extended work ability and a high standard of performance even in environment subject to extreme stress, meaning all types of ceramic tiles can be laid on mineral of cement based substrates.  Floors and walls, for internal use. Suitable for all types of glass mosaics, ceramic tiles on mineral or cement based substrates. Open and adjustability time _>  30min. Up to 8 mm thickness