Distribution Transformers Dealers in Sitapura, Jaipur

  Swastik make Oil Filled Distribution Transformers are supplied both in Stacked Core & Wound Core versions from 10 KVA to 2500 KVA rating transformers with robust design and sturdy construction. The Company is manufacturing Distribution Transformers of Conventional Type & also Star Labeling. The Government of india have recently introduced the Star Labeling ranging From Star 1 to from Star 5 that is concept of better efficiency to high quality to ensure energy efficient Transformers to be made available to customer as per requirements on introduction of the BIS concept. The company is in the process to obtaining the BIS certification and autorization for labeling.     Fittings: Rating and Diagram Plate Primary & Secondary Bushings Lifting Lugs Air release plug Filter Valve Silicagel Breather Oil level gauge Earthing terminals Conservator with drain plug Oil filling hole with cap Thermometer pocket with dial type thermometer Cover lifting eyes Explosion vent Stiffener on all sides of tank body Pulling eyes / Roller arrangement / Skid base     Optional fittings: Terminal connectors, Tapping Switch (OLTC), Arcing Horns, Lightning Arrester & Self protection system with MCCB. Recently in the Distribution Transformers “Bureau of Energy Efficiency” has introduced “Star Labeling Programme” which is an aggressive step towards the use of energy efficient transformers in the distribution network by the utilities i.e. a concept of better efficiency and high quality. BEE has started a “Standard Labeling” programme for various electrical equipments i.e. to ensure energy efficient equipment and appliances should be made available to the consumers. For Oil Immersed Distribution Transformers BEE has started such programme in which Transformers are labeled from Range of Star 1 to Star 5 based on the total losses exhibited at 50% and 100% load with temperature rise limits of top oil at 35 C and winding at 40 C. CRGO Wound Core Technology normally analogous with Single Phase Transformer is now added to our Distribution Tranformer varieties also with the advantage of flexibility and enhanced performance standard by judicious selectivity and use of design parameters identified for Distribution Transformer versions. The "BEE” standard of Star performance is also suitably met by Distribution Transformer Wound Core Transformer. Swastik Copper is taking active participation in promoting Star Rating Transformers conforming to BEE specification upto 5 Star Rating.

Danish manufactures oil filled distribution transformers in wound or stack core using crgo steel or amorphous metal.

• Standard: All transformers are designed manufactured and tested as per IS-1180 & IS-2026 (or any other prevailing standard)
• Capacity: 16 KVA to 2500 KVA
• Type: Indoor or Outdoor
• Rated Voltage: HV : 33 KV, 11 KV , 6.6 KV or 3.3 KV, LV : 11 KV, 6.6 KV, 3.3 KV or 0.433 KV
• Cooling: Naturally oil cooled (ONAN)
• Conductor: Aluminium (up to 500 KVA )/ Copper.
• Vector Group: Dyn-11 ( or any other group as per requirement)
• Connection Terminals: LV : Suitable Brass Metal Parts covered with porcelain Bushings up to 400 Kva and Epoxy Moulded Copper Bus - bar type metal part for 500 Kva and above.
• Temperature Rise: 45 C for oil & 55 C for windings.
• Tappings: 5 % in steps of 2.5 % (Other ranges also available as per requirement)

Distribution Type Transformer, Transformer

Oil Filled Distribution Transformer, on load tap changer