Voltage Stabilizers Dealers in Jaipur

• Certification: CE Certified
• Feature: Auto Cut, Easy Operate, Stable Performance
• Voltage: 220V
• Frequency: 50hz
• Phase: Three Phase
• Available Ratings: 150 kva

Salient Features : Advance solid state control circuitry No wave form distortion. high speed of voltage correction and very high efficiency. Auto/Manual operation facility from front panel. fine control for adjusting output voltage as per requirment. voltmeter with selector switch, mains and low/ high limit indicator lamps. single phase preventer, in case of three phase units. Uneffected by load power factor    Applications: CNC machines, laser machines and moulding machines etc. medical equpiments- x-RAY machine, ECG, MRI, CT SCAN etc. computer and micro-processor controlled equipments. lift , Escalators and Elevators. offset printing presses, Colour scanners, photocopiers and photographic equipments. Commerical buildings and mall residences & offices. Hospitals and nursing homes. Laboratories, process control equipments and AC Plants. Defence Equipments.    Advantages of IPS Servo Stabilizer: Quick,steady and accurate correction of voltage. Balance output voltage, irrespective of input unbalance. Saves on diesel cost, as generator is not required to run at high / low input voltage. Low production losses & Better Efficiency in plant. Increased life of your equipment , reduced heating and minimal losses. protects costly equipments from high/ low input voltage

• Range: Upto 5000 KVA.
• Efficiency: 98% to 99%.
• Input Voltage Range: 300 V – 460 V
• Output Voltage: 400 / 415 V ± 1%
• Life: 15 – 20 Years.

l.t. automatic voltage stabilizers hold its potential for units having either l.t. supply orlow capacity h.t. connections. l.t. servo stabilizers prevents direct exposure offluctuating voltage to critical electrical equipment in any establishment. it also preventsfrequent tripping of overload and over / under voltage relays to ensure uninterruptedproduction. these are designed for balanced supply and unbalanced loads as well asunbalanced supply and unbalanced loads. the range of input supply for stabilizerdepends upon the voltage condition at the supply point. however, some standardranges for l.t. automatic voltage stabilizers are as under.   advantages reduction in breakdown of the electrical equipment. energy saving ranging from 5% to 10%. reduced electricity bill. wear & tear of the carbon is minimal due to friction less and smooth surface of the winding track and rolling mechanism of the carbon roller. better current carrying conductor as copper strip instead of copper wire. low no load losses due to use of pure crgo core. inspection of carbon roller can be done without taking out the whole assembly. in case of failure of the automatic controller, the operation can be shifted to motor control, in case of failure of motor; the same can be shifted to manual mode. efficiency t power l.t. automatic servo voltage stabilizer is approx. 98% to 99%. installation can be done for indoor / outdoor services. life of t power l.t. automatic servo voltage stabilizer under normal working conditions is 15 – 20 years.

• Type: Static Voltage Stabilizer
• Certification: ISO 9001:2008
• Weight: 30 KG
• Color: Gray
• Voltage: 415
• Condition: New
• Application: Stabilization
• Output Type: AC Single Phase, AC Three Phase
• Frequency: 50hz
• Cooling System: Air Cooling
• Warrenty: 1year
• Automation Grade: Automatic
• Feature: Auto Cut, Easy Operate, Shocked Proof, Stable Performance, Works In Low Voltage

• Usage/Application: Industrial
• Packaging Size: 25-50 kg
• Packaging Type: Bag
• Grade Standard: Technical Grade
• Physical State: Powder
• Purity: 99%

• Automation Grade: Semi-automatic
• Country of Origin: Made in India
• Brand: V Guard
• Current Capacity: 170V - 270V
• Model Name/Number: VG 500
• Phase: Single Phase
• Mounting Type: Floor
• Warranty: Three Warranty
• Shipping Available: Yes I Ship
• Dispatch Time: Immediate
• Input Voltage: 170V
• Output Voltage: 270V
• Capacity: 2 TON AC

• Output Voltage: 400V
• Input Voltage: 240-470V
• Phase: Single Phase
• Capacity: 30kVA
• Usage/Application: Industrial

3-Phase Linear/Roller Types Servo Regulator We are manufacturing Industrial type Automatic Voltage Regulators (Stabilizers) using the differential wound Vertical Roller Type Regulators.LINEAR TYPE Plus/Minus Heavy Duty Regulator is manufactured with rollers rolling on both the sides of the coil. The size of conductor used is much more than that used in conventional design regulators. Being +/- type, the same winding is used for boosting the voltage on one side and bucking the voltage on the other side of the regulator. So the rating of the regulator required is much less than that of the conventional design regulator.The losses of differential wound linear regulator are lesser than the conventional type regulator and due to heavy section of copper used in our regulator, overall size is more and practically the losses of our regulator are much more lesser than the conventional type of regulator. As per the Regulator design, the regulator is technically OUT OF CIRCUIT, when the input voltage is LOWEST/HIGHEST as per the voltage range of the stabilizer while in stabilizer with conventional brush type regulators, the regulator is in the circuit and losses are maximum at LOWEST/HIGHEST voltage as per the range of the stabilizer. QUALITY: CORE: The core is constructed from low loss, cold rolled, grain oriented, annealed laminations of electrical sheet steel conforming to the latest standards using grade M4 laminations for the minimum no load losses. WINDINGS: Regulator Coils are wounded with 4PC paper layer covered copper strip for better insulation. The X-section area of the Electrolytic Grade copper strip used is much higher to give highest quality with minimum losses for the entire running life of the equipment.RADIATORS: Cooling is provided to keep the hot spot temperature as low as possible for higher working efficiency and for all the years with lowest temperature rise even on full load conditions. TANKS & PAINTS: The enclosure/tanks are made of M.S. steel plates / sheets of 3 mm thickness with adequate stiffeners. All the external and internal surfaces are given a primary coat of Epoxy primer and finishing coat of Epoxy paint for better life.OIL: Oil is properly tested for resistivity, dielectric and acidic characteristic conforming to IS 335. Before topping up oil is filtered thoroughly. We use HT grade 11 KV oil even for the LT equipment for better dielectric strength and high flash point.

• Color: Blue
• Phase: Three Phase
• Application: Industrial
• Input Voltage: 1000V
• Output Voltage: 415V
• Automatic Grade: Automatic
• Brand Name: Gaurav
• Rated Capacity: 1000 KVA
• Cooling Type: Air Cooled
• Control Type: Relay controller
• I Deal In: New Only
• Winding: Copper

State of art technology in Servo Dot voltage stabilizer. Enables to Provide Highly Reliable & Efficient A.C. Power Suppliers and Meeting Majority of Voltage Control application for Electrical & Electronic Equipments.     FEATURES   SERVO DOT - Servo Voltage Stabilizers offer an unequalled combination of features providing performance and great versatility & high reliability. All solid state control-No Relays or Remote Control Switches. This allows a great precision and speed than using traditional control systems. No wave shape distortion introduced. Unaffected by Load Power Factor. High Efficiency - greater than 96%. High Accuracy - better than +0.5%, Zero to full load. Accuracy screw driver adjustable from +0.5% to +2% to adapt working to a particular application, environment & location. Wide Output voltage adjustment range - one can select by means of a proper ;control, Output Voltage (stabilized) to be equal to nominal voltage or to another value within +5%, the regulating area obviously changing. Front loading or easily accessible, inter-changeable, Plug-in-type control Module makes the unit conveniently serviceable without shut off & down time Built in Voltmeter to read Input or Output Voltage. Expanded scale Voltmeter provided as optional to read Output/Input voltage to accuracy of 1 or 2 volts. Push Button type, Auto-Manual control generally provided, to operate unit in case of Electronic Control Card failure etc.

Situations like line frequency variation, overload, and improper load power factor are dealt with ease by Servo Motor Operated line voltage correctors. You can even handle all the operations from the front panel. Servo voltage stabilizer is a powerful product that can provide constant voltage from fluctuating supply round the clock.

Special Features Easy to install, operate, maintain & service. Intelligent memory time delay function between shut down & restart to safeguard your equipments.  Hi-Low voltage cut off to protect dangerously Hi and Low voltage in mains supply to equipments. The corrector generates least heat & is extremely efficient.  Fully digital IC controlled circuit for correct switching and optimum voltage output selection. Minimum electricity consumption on no load condition saves on electricity bills.  Hi-tech digital meter to display voltage, Amps & over load.*    

Pvc Stabilizers, Rubber Processing Oil Aromatic, Paraffin Wax, Stearic Acid

We are offering best Weight Stabilizer

Solar Batteries, SOLAR PANELS, Inverter, online uninterrupted power supply

industrial servo voltage stabilizer

Stabilizers, Electronic Goods, electronic inverter

static voltage controller, Sheet Metal, Electronic Instruments

Stabilizers, Ups, Inverter

Stabilizer, Aluminum Sheet, Insulation Material, Insulation Materials