Neelkanth Rubber Mills Kapurthala Road, Jalandhar, Punjab

We Offer Single and Twin Line Welding Hose. application : Made from Suitable Rubber Compound Resistant to Oxygen, Fuel Gas & other Non Combustible Gases. Blue or Green Colour for Oxygen & Red for Acetylene and other Fuel Gases. this Hose is Used for Welding & Cutting in all Types of Industrial Workshops, Ship Building, Repair Yards, Steel Mills, Service Stations Etc.

We Offer Water Hose. application : Made from Suitable Rubber Compound, Water Hoses are Used for Purposes of Wide Range of Applications in Various Industries, Mines, Dams, Irrigation Etc. - Conforms to Is444/1987 - Colour : Black, Red & Green - Length : as per Requirement

Neelkanth industrial V – Belts are manufactured under strict vigilance and observation of the state of art of modern technology with reinforcement of highly shock - load resistant synthetic cords combined with special rubber compound and ultimately jacketed to obtain maximum life and smooth run of the drive. We are well reckoned as one of the predominant V belt manufacturers and automotive V belts exporters and suppliers from India. Top Compression Section : The rubber used in this section is compounded to withstand sudden shock loads and to keep the belt flexing readily when passing over the pulleys. Insulation Section : The insulation section holds the tension binding section for extra strong adhesion between cords and the top and bottom compression section. Bottom Compression Selection : This section holds the normal cross section of the belts and is compounded to resist compression fatigue and heat for longer service life. Tension Member : The load carrying cords are tough polyester/ aramide cords that have been specially treated to temper the cords to their point of high strength, Low elongation and greater resistance to bending fatigue. Cover : The bias-cut Cover fabric is impregnated with special rubber to protect the inner part of the belts and provide strong abrasion resistance on the pulley groove. Process Control in Manufacturing : Confirms the product as Antistatic, Oil & Heat Resistant, quality & length as accurate. Neelkanth V-Belts : Neelkath V- belts envisage most modern Techno- effect geometrically, accurate length without and grading, facilitating easy stoking, mounting and smooth longest drive life. Tension forces : force required deflecting belt 1.6mm per 100 mm of span.

Buy the best quality transmission rubber belts that is the perfect outcome of the best practices and the innovative techniques. Our up-to-date logistic facilities support us in meeting the delivery deadlines promised to the customers.

Transmission belts find wide area of application in varied industries as textile, paper, pharmaceutical, food processing, engineering and other allied industries. We are well reckoned as one of the supreme rubber transmission belts exporters and suppliers in India. These belts are approved by the Punjab Govt. These power transmission belts are available in two edges: Cut Edge from 25mm to115O mm width. Round Edge from 25mm to 20Omm width. -PLIES : 3 PLIES TO 12 PLIES.   -LENGTH : 100 Mts. Roll duly packed in polythene and Gunny Bags   -COLOURS : Grey, Green, Orange, Red, Cream.   -SIDE PAINTS : Green, Blue, Red, Black, Silver.   -TRADE NAMES : 'Suman', 'Blue Bird', 'Sohana','Duck', 'Rajdoot', 'Neelkanth'. Quality Marketing Scheme : Solid Woven Duck, Cotton Fabric Plies.   Lighter, Stronger and more durable.   Anti-Abrasive.   Less Elongation by use of specially treated touch cotton cords.   Uniform Quality.   Higher Tensile Strength.   Modern production facilities and equipped laboratory.   Reduction in bearing load due to light weight.

Type : Transmission Belts

Material : Canvas

Thickness : 1.5-2mm, 2.5-3mm, 5.5-6mm, 7.5-8mm

Length : 2feet, 4feet

Application : Automobile Industry, Electrical Industry

Color : Multi Colour

Pattern : Plain

Width : 100-120mm, 120-140mm, 20-40mm

Structure : Belt Conveyor

We are engaged in manufacturing, exporting and supplying Steel Cord Rubber Conveyor Belts. Our Steel Cord Rubber Conveyor Belts consist of galvanized steel cord and core rubber which possesses superior adhesive property. Their body is covered with top and bottom rubber layers. Steel cord of our belts is composed of left and right twisting wire. It is arranged evenly and longitudinally in the belt. We make available our Steel Cord Rubber Conveyor Belts in various strengths and specifications at highly competitive prices. Availability : Up to 2400 mm width Types of Cords used High Carbon Steel cords Zinc coated to ensure superior bonding between Cord and Rubber and prevent corrosion Cord configurations available : 7 *7 , 1*19+7*7 , 7*19 etc

Type : Steel Cord Conveyor Belt

Material : Rubber

Style : Roll

Color : Black

Application : Moving Goods

Finishing : Polished

Feature : Excellent Quality, Heat Resistant

We Cater a Wide Array of Qualitative Natural Rubber Sheets that is Manufactured from the Optimum Quality Rubber. We have Carved a Niche as the Most Prominent Rubber Sheets Manufacturer and One of the Leading Exporters for the Same. These Industrial Rubber Sheets are Highly Appreciated for Their Impeccable Quality and Excellent Performance. They Find Wide Area of Application in Varied Industries Due to Their Long Lasting Trouble Free Performance. We Provide These Rubber Sheets Within the Stipulated Time Frame and that Too At Very Competitive Price.

Our company is a well-known Manufacturer, Exporter and Supplier of Rough Top Rubber Conveyor Belts. They are used for transporting light weight goods, either being inclined or being horizontal. Also, they are suitable for transporting fragile or deformed materials and packed goods at an angle from 15 to 35 degree. Our Rough Top Rubber Conveyor Belts makes less friction coefficient making it ideal for running over table and flat panel. They are non-toxic and odorless in nature. Further, we provide Rough Top Rubber Conveyor Belts at very feasible prices. Construction and Properties 2or3-Ply construction with cut edges and a carcass of synthetic EP fabric. The surface texture resists the tendency for the material to roll back down the conveyor. The black top cover is recommended for utility type incline service while the tan cover is suggested for transporting packaged food products where an odorless , non-toxic , non- marking belt is a necessity. Top cover is a full 1/8* thick SBR and the back is protected by either a durable friction surface bottom or a synthetic bare-back for slider bed applicatons.

Type : Rough Top Conveyor Belt

Material : Rubber

Thickness : 10-20mm

Color : Black

Application : Moving Goods

Feature : Excellent Quality, Heat Resistant, Long Life

Loading Capacity : 20-40kg, 40-60kg

Our Rough Top Belts are Designed for Transporting Light Weight Goods, also Suitable for Transporting Fragile or Deformed Materials and Packed Goods such as Glass, Papers, Bags, Boxes or Cartons At Angle from 15 to 35 Degree.

Avail from us an ample assortment of qualitative rollers and pulleys, which is manufactured from the genuine quality raw materials. We stand in the midst of major industrial rollers manufacturers and machinery pulley exporters from India. These pulley rollers are highly appreciated in national as well as in the international market for their brilliant performance. They are available in varied sizes and dimensions. Their robust structure and high durability make them perfect for various industries. We provide them at very brisk pace and that too at moderate price. Troughing Idlers : shape the belt to support a moving load without spillage or damage to the belt. Impact Idlers : absorb the shock of falling material at loading and transfer points to protect belt from damage. Discs are hammerhead shaped and spaced to allow deflection for shock cushioning. Individual discs can be replaced as required. Return Idlers : support the empty belt during the return run.

Size : 0-15Inch, 15-30Inch, 30-45Inch, 45-60Inch, 60-75Inch, 75-90Inch

Type : Pulleys

Material : Brass

Shape : Multi Shapes

Thickness : 10-15mm, 15-20mm, 20-25mm

Uses : Crane Use, Electric Cars

Color : Multi Colour

Surface Finishing : Polished

Specialities : Corrosion Resistance, Dimensional, Durable, Heat Resistance

Avail from us supreme quality Light Duty Rubber Conveyor Belts. Precisely designed using optimum grade raw material and ultra-modern technology, the Light Duty Rubber Conveyor Belts are available in numerous sizes up to 2500mm. They are developed with bare top and bottom without friction on the fabric in 2 Plyies and 3 Plyies for light duty material handling purpose. We provide Light Duty Rubber Conveyor Belts at budget�friendly prices.

Type : Heavy Duty Conveyor Belt

Material : Rubber

Thickness : 10-20mm, 20-30mm, 30-40mm, 40-50mm

Color : Light Yellow

Application : Moving Goods

Feature : Excellent Quality, Heat Resistant, Long Life, Scratch Proof

Loading Capacity : 20-40kg

We provide a wide range of industrial elevator belts, which is highly acclaimed for its excellent performance. We have carved a niche as the most prominent elevator belts manufacturer, based in India. Bucket elevator belts are designed for inclined conveyors of material by, fixing metal slots or buckets on the carrying surface of the belt at regular intervals. These rubber elevator belts are offered in 34oz hard duck cotton and in nylon as well. We deliver these belts within the stipulated time frame and that too at very affordable price. Proper Belt Width For buckets up to 16" wide (400mm), the belt should be at least 1" (25mm) wider than the buckets. For buckets wider than 16" wide (400mm), the belt should be at least 2" (25mm) wider than the buckets. Proper Pulley Face Width For belts up to 12" (300mm) wide, the pulley face width should be at least 1" (25mm) wider than the belt. For belts greater than 12" (25mm) wide, the pulley face width should be at least 2" (50mm) wider than the belt. Head Pulley Lagging The installation of high quality rubber lagging is recommended to provide the highest coefficient of friction between the belt and the pulley, thereby maximizing the driving force and eliminating belt slippage. Lagging also aids in cushioning the impact of the buckets on the head pulley.

We Offer Conveyor Belt. Please Contact Us.

We Offer Conveyor Belt. Please Contact Us.

We Offer Conveyor Belt. Please Contact Us.

We Offer Conveyor Belt. Please Contact Us.

We provide a huge gamut of superlative industrial conveyor belts that is used in varied domain like Thermal Power Stations, Coal Mines, Iron Ore Plants, Cement Industries, Sponge Iron Plants, Port Trusts, Lignite mines, Crusher Plants, Fertilizer Industries etc. We are counted among the overriding conveyor belts manufacturers and metal conveyor belts exporters from India. Durability and excellent performance are some of the salient features of the industrial conveyor belts. The following programme is a pointer towards reach and production capabilities of Neelkanth. Width : 300 mm to 1600mm in steps of 50mm. Length : Open or endless. Plies : 3 to 7 Plies. Cover Thickness : 1mm to 6mm in steps of 0.5mm and above 6mm in steps of 1mm. Tensile Strength : 200 KN/M to 1600 KN/M. Types of Synthetic Carcass : General Duty (GD), Extra Duty (ED) & Heavy Duty (HD). Edges : Cut edges or molded. Breaker Ply : Breaker is provided on face, back and edges as per customer's requirements. Ply Construction : Belts are manufactured in various constructions like straight ply, stepped ply and reversed stepped ply. Fabric : Belts are manufactured with varieties of fabrics e.g. cotton/ cotton, cotton/ Nylon and Synthetic fabric like nylon/nylon grade N6 or N66 and polyester/Nylon (EP). - Cotton/ Cotton fabric : The conventional cotton/cotton fabrics used are 25oz, 32oz, 36oz, 42oz & 45oz. - Cotton Nylon Fabrics : The belts with cotton nylon fabrics have higher carrying capacity as they trough more than cotton fabric belts. The cotton nylon fabrics are CN 40, CN 50 CN 60, CN 70, CN 75, CN 90, CN 100, CN 130 & CN 150. -Synthetic Fabric : The synthetic fabrics are the most effective reinforcement for conveyor belts. The extra strength and controlled rigidity obtained from synthetic fabric carcass combined with high levels of ply to ply adhesion enable less bulky constructions to. Be employed compared with conventional cotton/ cotton or cotton/ Nylon fabrics. The belts with synthetic fabric carcass offer a longer service life with improved performance under arduous service conditions. SKIM COATING : Skim coating is offered as standard construction in nylon/ nyllon, polyester/ nylon carcasses. COVER GRADES : AS PER: IS 1891 Pt I -V, DIN 22102:1991, ISO 340, RMA 1 & 2, Canadian Standard CAN/CSA/M-422/M87

We provide a huge gamut of superlative industrial conveyor belts that is used in varied domain like Thermal Power Stations, Coal Mines, Iron Ore Plants, Cement Industries, Sponge Iron Plants, Port Trusts, Lignite mines, Crusher Plants, Fertilizer Industries etc. We are counted among the overriding conveyor belts manufacturers and metal conveyor belts exporters from India. Durability and excellent performance are some of the salient features of the industrial conveyor belts. The following programme is a pointer towards reach and production capabilities of Neelkanth. Width : 300 mm to 1600mm in steps of 50mm. Length : Open or endless. Plies : 3 to 7 Plies. Cover Thickness : 1mm to 6mm in steps of 0.5mm and above 6mm in steps of 1mm. Tensile Strength : 200 KN/M to 1600 KN/M. Types of Synthetic Carcass : General Duty (GD), Extra Duty (ED) & Heavy Duty (HD). Edges : Cut edges or molded. Breaker Ply : Breaker is provided on face, back and edges as per customer's requirements. Ply Construction : Belts are manufactured in various constructions like straight ply, stepped ply and reversed stepped ply. Fabric : Belts are manufactured with varieties of fabrics e.g. cotton/ cotton, cotton/ Nylon and Synthetic fabric like nylon/nylon grade N6 or N66 and polyester/Nylon (EP). - Cotton/ Cotton fabric : The conventional cotton/cotton fabrics used are 25oz, 32oz, 36oz, 42oz & 45oz. - Cotton Nylon Fabrics : The belts with cotton nylon fabrics have higher carrying capacity as they trough more than cotton fabric belts. The cotton nylon fabrics are CN 40, CN 50 CN 60, CN 70, CN 75, CN 90, CN 100, CN 130 & CN 150. -Synthetic Fabric : The synthetic fabrics are the most effective reinforcement for conveyor belts. The extra strength and controlled rigidity obtained from synthetic fabric carcass combined with high levels of ply to ply adhesion enable less bulky constructions to. Be employed compared with conventional cotton/ cotton or cotton/ Nylon fabrics. The belts with synthetic fabric carcass offer a longer service life with improved performance under arduous service conditions. SKIM COATING : Skim coating is offered as standard construction in nylon/ nyllon, polyester/ nylon carcasses. COVER GRADES : AS PER: IS 1891 Pt I -V, DIN 22102:1991, ISO 340, RMA 1 & 2, Canadian Standard CAN/CSA/M-422/M87

We Offer Air Hose. application : this Hose Has Multiple Applications for Use with General Construction Works, Workshop Foundries, Light Engineering Industries, Shipyard Garages & On Pneumatic Tools. construction : Seamless Non Porous Rubber Compounded Lining Provides Medium Resistance to Heat & Oil. - Conforms to Air Applications : Bs5118 & Iso 2398 - Colour : Black, Red & Yellow reinforcement : High Tensile Textile Yarn to Meet the Pressure Requirements.

General Purpose Grade M-24 conforming to IS:1891 (Part I) 1988 is suitable to withstand high resistance to cutting, tearing etc. In heavy duty applications for highly abrasive materials like metallic ores, coke, stone, rocks etc. Grade N-17 conforming to IS:1891 (Part I) 1988 is recommended to carry moderately abrasive materials as coal, fine ores, cement, sand etc. Heat Resistance Grade HR (T1) conforming to IS:1891 (Part 2) 1988, suitable for carrying hot coarse materials upto 125°C and hot fine materials upto 100°C. Grade SHR (T2) conforming to IS:1891 (Part 2) 1988, suitable for carrying hot coarse materials upto 150°C and hot fine materials upto 100°C. Grade SHR 180 provides excellent heat resistance and moderate abrasion resistance characteristics & is recommended upto 180°C for coarse and 150°C for fine material. Oil Resistance (O.R) Grade O.R conforming to Is:1891 (Part 3) 1988 is suitable for carrying materials which leave residues of fat and oil. Grade Hygenic Conforms to IS :1891 (Part 4) 1988 and is suitable for conveying tea, coffee, food products & pharmaceuticals. Fire Resistant Grade FR - Fire resistance belting has been developed to meet Indian and Canadian standards specifications. This grade is specially meant for conveying coal in thermal power stations where fire hazards exist. Flame Resistant This belt is designed to prevent fire risks in coal mines where is not easily accessible and to reduce maintenance of the conveyors.The important characteristic is self-extinguishable cover rubber and meet drum friction test. It is suitable for serving in mining industry, power plant, electric utilities, coal cleaning plants

Chevron Rubber Conveyor Belts are designed by our skilled engineers using optimum grade raw material and modern technology. Ensuring optimum grip to their handling material, Chevron Rubber Conveyor Belts find wide application in industrial conveyors for conveying of packed and unpacked material. Resistance to abrasion, long service life and flexibility due to homogeneous Chevron profiles are the prime features of Chevron Rubber Conveyor Belts. They prevent load slip or product roll owing to their precise design.

Type : Chevron Conveyor Belt

Material : Rubber

Thickness : 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm

Color : Black

Application : Moving Goods

Feature : Heat Resistant, Long Life, Scratch Proof

Loading Capacity : 10-15kg, 15-20kg, 20-25kg, 25-30kg