Taping Machine Dealers in Gopal Nagar, Jalandhar

ITCO Indian Machine Tools Corporation is famous for its machinery such as its manufacturing, supplying and exporting of drilling cum tapping machines in India and abroad. In drilling cum tapping machine tapping or threading operation is done along with drilling. This tap drill machine is most suitable in areas where operator needs to perform drilling and tapping operations without opening the job such as using a quick change chuck. The tapping attachment of the machine tap is fitted on the motor plate that is fixed on the machine body. The tap when completes the desired depth is reversed automatically by the limit switch. The electrical panel on the electrical tapping machine has a toggle switch with options of limit control and foot control. When the universal tapping machine does tapping for a blind hole, then move the toggle switch upwards to ‘limit control’ and set the depth with two small stoppers fitted on the main rod. For the semi automatic tapping machine to tap a through hole, then move the toggle switch to ‘foot control’ option and complete the tapping using the foot switch. Here the stoppers and limit switch is not used. The tapping operation on these vertical tapping machines starts by engaging the tap to the hole and the tapping tool itself takes its own movement to complete the depth of thread. So no effort is needed during the tapping cycle. In case of blind holes tolerance is required between bottom surface and tap depth. The tap tool is held in tap sleeve which fits in the spindle Morse taper of these machine taps. ITCO tapping machine is very accurate and productive machine which successfully passes the thread gauge test.

• Country of Origin: Made in India
• Usage/Application: Indutrial
• Spindle Travel: 75mm
• Table Working Surface: 145*145mm
• Approx. Weight: 50KG
• Cap. In Brass: 7mm
• Cap. In M.S: 6 mm
• Column Diameter: 47mm
• Spindle Center To Column: 82 mm
• Distance Chuck To Table: 82 mm
• Tapping Depth: 30 mm
• Overall Heightr Front Width: 26.1*20" * 9.3/4
• V- Belt Section: A/38
• Electrical Motor: 0.50H.P

Itco INDIAN ENGG CORP is manufacturing, exporting & supplying state of art Drilling cum Tapping Machine in INDIA & abroad. These Tap Drill machines are custom designed and fitted with special best quality bearings. Reliable branded electrical components are fitted in tapping attachment / electrical panel for economical high precision production of drilling and tapping operation. This Universal Tapping machine is suitable to tap any type of thread inside a vertical hole. One can do threading in Metric or BSW threads, Left Hand (LH) or Right Hand (RH) threads depending upon the machine tap selected. Tapping Drill sizes are selected from drill and tap chart. Working of this electric tapping machine is very simple. There are two limit switches operated by means of an adjustable cams which are used for Tapping in blind holes. While tapping through holes foot control switch is provided. These are semi automatic tapping machine i.e. the operator has to bring the tap towards the hole by manual action and once few threads are cut (1 to 2 nos) no further hand feed is required and the tap automatically advances towards the depth set and withdraw back successfully to home position. To switch between drilling and Tapping process mode a selector switch is provided. Machining of External threads is also possible by using a special purpose tapping tool. These Vertical Tapping machines are simple to operate, very accurate and offers a unique combination of drilling & tapping operation suitable for mass production/ tool room jobs. SALIENT FEATURES Drilling cum Tapping machines are Highly versatile for Tapping, Drilling, Reaming and Screwing at preset depth. Simple to install, simple to operate, no extra skill required. Dual operation of Tapping and Drilling without any extra attachment. The mere flick of switch sets the machine from Tapping to Drilling and vice-versa. Automatic reversal of spindle at preset depth and changes the direction of spindle automatically back to normal. Simple back gear arrangement facilitates 8 spindle speeds to suit the cutting speeds. Emergency reversing foot switch to avoid tap breakage. Being an electrical switch gear unit no wear and tear and hence no maintenance is required Machine Accuracy as per IS 2425

• TAPPING CAPACITY IN STEEL: 6mm 13mm
• TAPPING CAPACITY IN CI, AL, BRASS: 9mm 16mm

high speed Tapping Machine as a Manufacturer, Exporter & Supplier in INDIA. These Precision Tapping Machines are very successful in mass production of internal threading jobs. Any type of internal thread i.e. MetricBsw, LHRH can be tapped on this universal tapping machine by referring the Tap and Drill chart. The feed is given manually by hand and there is no tap breakage in these vertical tapping machines due to friction clutch assembly. A wide range of spindle speed is provided for machining different tap sizes. Only high speed steel machine tap’s are recommended along with appropriate tapping lubricant selected on the basis of material to be tapped. Machine Taps can be holded either in chuck or directly in machine spindle by using tap sleeves. Working of clutch type tapping machine is very simple, the forward and reverse rotation of spindle is done by means of taper cones and friction clutch assembly. Itco Tapping machines are very robust in design and have long operating life. Due to its simple operation, low energy consumption and high performance these high speed tapping machines find their application in almost all types of industries like, sheet metal, plastic switch gear, electronics and other allied non ferrous products.

Tapping Machine, Packaging Equipment, Shrink Tunnel Machine

Drilling Cum Tapping Machine, Bench Drilling Machine

In Tapping Machine, tapping or threading operation is done along with drilling. This machine is most suitable in areas where operator needs to perform drilling and tapping operations without opening the job such as using a quick change chuck. The tapping attachment is fitted on the motor plate that is fixed on the machine body. The tap when completes the desired depth is reversed automatically by the limit switch. The tapping attachment has a toggle switch with options of limit control and foot control. When the tapping is done for a blind hole then we move the toggle switch upwards to ‘limit control’ and set the depth with two small stoppers fitted on the main rod. For the tapping in a though hole then you move the toggle switch to ‘foot control’ option and complete the tapping using the foot switch. Here the stoppers and limit switch is not used. The tapping operation starts by engaging the tap to the hole and the tapping tool itself takes its own movement to complete the depth of thread. So no effort is needed during the tapping cycle.