Tapping Machines Dealers in Jalandhar

We are offering tapping machine.

Itco INDIAN ENGG CORP is manufacturing, exporting & supplying state of art Drilling cum Tapping Machine in INDIA & abroad. These Tap Drill machines are custom designed and fitted with special best quality bearings. Reliable branded electrical components are fitted in tapping attachment / electrical panel for economical high precision production of drilling and tapping operation. This Universal Tapping machine is suitable to tap any type of thread inside a vertical hole. One can do threading in Metric or BSW threads, Left Hand (LH) or Right Hand (RH) threads depending upon the machine tap selected. Tapping Drill sizes are selected from drill and tap chart. Working of this electric tapping machine is very simple. There are two limit switches operated by means of an adjustable cams which are used for Tapping in blind holes. While tapping through holes foot control switch is provided. These are semi automatic tapping machine i.e. the operator has to bring the tap towards the hole by manual action and once few threads are cut (1 to 2 nos) no further hand feed is required and the tap automatically advances towards the depth set and withdraw back successfully to home position. To switch between drilling and Tapping process mode a selector switch is provided. Machining of External threads is also possible by using a special purpose tapping tool. These Vertical Tapping machines are simple to operate, very accurate and offers a unique combination of drilling & tapping operation suitable for mass production/ tool room jobs. SALIENT FEATURES Drilling cum Tapping machines are Highly versatile for Tapping, Drilling, Reaming and Screwing at preset depth. Simple to install, simple to operate, no extra skill required. Dual operation of Tapping and Drilling without any extra attachment. The mere flick of switch sets the machine from Tapping to Drilling and vice-versa. Automatic reversal of spindle at preset depth and changes the direction of spindle automatically back to normal. Simple back gear arrangement facilitates 8 spindle speeds to suit the cutting speeds. Emergency reversing foot switch to avoid tap breakage. Being an electrical switch gear unit no wear and tear and hence no maintenance is required Machine Accuracy as per IS 2425

• Type: Drilling Cum Tapping Machine
• Weight: 100-200kg, 200-300kg, 300-400kg
• Color: Black, Blue, Brown, Grey, Light Green, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years
• Application: Drilling Metal, Non Metallic Components, Tapping
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• make: Itco

TECHANICAL SPECIFICATIONS: Model Itco Tapping Machine 13mm is heavy duty tapping machine having Tapping capacity in Steel 13mm, CI 16mm. Spindle is made of alloy steel accurately machined and ground. Spindle is HARDENED & GROUND. Spindle MT bore accuracy 20 to 30 microns. Head is made from close grained CI, accurately machined to ensure perfect parallelism between the column and spindle. Head is fitted with total 11 bearings for long life. A precision ground column is made from Heavy section seamless steel tube which ensures rigidity and resists deflection. Square table is accurately machined for precision work. All moving parts are accurately machined and ground. Rapid tapping machine and easy to operate. Motor reversal not required hence maximum production output. Low production cost with optimum results. Clutch assembly is designed perfectly to avoid any vibrations and assures smooth running. Least tap breakage due to fine clutch engagement. Useful for single, batch, mass productions without any change in settings. Fine depth accuracy even in blind holes. Useful for both RH and LH threading. Renewable type clutch lining system. Easy and effortless handling. Machine Accuracy as per IS 6175 Technical Specifications TAPPING CAPACITY IN STEEL 13mm TAPPING CAPACITY IN CAST IRON 16mm MORSE TAPER IN SPINDLE MT-2 SPINDLE TRAVEL 60mm PILLAR DIAMETER 57.5 PILLAR LENGTH 915 DISTANCE BTW CENTRE OF SPINDLE & PILLAR FRONT 180 MAX DISTANCE BTW SPINDLE & TABLE 470 MAX DISTANCE BTW SPINDLE & BASE 745 TABLE WORKING SPACE 270 x 270 BASE WORKING SURFACE (MACHINED) 305 x 305 OVERALL SIZE OF BASE 435 x 305 MOTOR 1HP, 960 rpm, 3 Phase NET WEIGHT 115 Kg SPACE OCCUPIED (LxBxH) 700 x 305 x 1360

• Country of Origin: Made in India
• Usage/Application: Indutrial
• Spindle Travel: 75mm
• Table Working Surface: 145*145mm
• Approx. Weight: 50KG
• Cap. In Brass: 7mm
• Cap. In M.S: 6 mm
• Column Diameter: 47mm
• Spindle Center To Column: 82 mm
• Distance Chuck To Table: 82 mm
• Tapping Depth: 30 mm
• Overall Heightr Front Width: 26.1*20" * 9.3/4
• V- Belt Section: A/38
• Electrical Motor: 0.50H.P

• Functions: Drilling , Tapping, Boring
• Automation Grade: Semi-Automatic, Manual

In case of blind holes tolerance is required between bottom surface and tap depth. The tap tool is held in tap sleeve which fits in the spindle Morse taper of these machine taps. ITCO tapping machine is very accurate and productive machine which successfully passes the thread gauge test.

Tapping Cum Drilling Machine, Bench Drilling Machine, Drill Chucks

Drilling Cum Tapping Machine, Bench Drilling Machine

In Tapping Machine, tapping or threading operation is done along with drilling. This machine is most suitable in areas where operator needs to perform drilling and tapping operations without opening the job such as using a quick change chuck. The tapping attachment is fitted on the motor plate that is fixed on the machine body. The tap when completes the desired depth is reversed automatically by the limit switch. The tapping attachment has a toggle switch with options of limit control and foot control. When the tapping is done for a blind hole then we move the toggle switch upwards to ‘limit control’ and set the depth with two small stoppers fitted on the main rod. For the tapping in a though hole then you move the toggle switch to ‘foot control’ option and complete the tapping using the foot switch. Here the stoppers and limit switch is not used. The tapping operation starts by engaging the tap to the hole and the tapping tool itself takes its own movement to complete the depth of thread. So no effort is needed during the tapping cycle.

Tapping Machine, Packaging Equipment, Strapping Machine

Tapping Machines, Construction Machinery, Claw Hammer, Combination Plier

bench vice tapping machine, Drilling Machine, Drill Chuck, Woodworking Vice

Tapping Cum Drilling Machine, table drilling machine, Cnc Live Centre