Brass Dealers in Jam, Jamnagar

C34500 high leaded brass "64%" is the brass with high machining ability. The increase in lead content will result in increased machining ability with good strength and atmospheric corrosion resistance. The increased lead content will also provide pressure tightness by sealing the shrinkage pores.Applications : Industrial : Pinions, Gears, Valve Stems, Flare Fittings, Adapters, Couplings Plumbing: Plumbing Fittings, Plumbers' Brass Goods Equivalent Specifications: Specifications Designation BS CZ131 / CZ119 EN CW601N/CuZn35Pb2 JIS C3560 DIN 2.0331 ISO   Russian (GOST)   Chemical Composition:   Cu Pb Zn Fe Min/Max 62 - 65 1.5 – 2.5 Rem. (Max.) 0.15 (Max.) Specifications: Ingots   Bar   Square   Billets   Plate   Sheet   Flat   Rods   Profiles   Wire   Hollows   Hex   Tubes   Fabrication Properties: Joining Technique Suitability Soldering Excellent Brazing Good Oxyacetylene Welding Not Recommended Gas Shielded Arc Welding Not Recommended Coated Metal Arc Welding Not Recommended Spot Weld Not Recommended Seam Weld Not Recommended Butt Weld Fair Capacity for Being Cold Worked Fair Capacity for Being Hot Formed Poor Machinability Rating 90 Mechanical Properties: Form Temper Code Tensile Strength (ksi) YS-0.5% Ext (ksi) Elongation (%) Rockwell B Scale Section Size (in) Rods H02 50 Min for Standard62 Max for Standard 20 Min for Standard 15 Min for Standard 55 Min for Standard 75 Max for Standard 0.75 H02 57 Min for Standard80 Max for Standard 25 Min for Standard 7 Min for Standard  

• Material: BRASS
• natural colour: yellowish
• Country of Origin: JAMNAGAR

We are manufacturer and supplier of brass inserts in various designs as per customer requirements. Ask for any kind of brass inserts required

• Brand Name: dutux
• Supply Ability: 5000 Carton/Cartons per Month
• Model Number: Brass Insert
• Place of Origin: Gujarat, India

We are the main supplier of this product.

Material Free Cutting Brass IS 319 Type (I) Free Cutting Brass as per BS 249 Type (I) High Grade Free Cutting Brass Any Special Brass Material Composition as per customer's requirement Threads ISO Metric (MM Threads) BA Threads BSW Threads UNC & UNF Threads DIN Standard Length/Size : As per Specifications or custom designs Finish and Coating : Natural, Nickel Plated, Tin Plated, Gold plated, silver plated, chrome plated or any coating as per customer specification. Packaging : As per customers specification or standard export packaging.

• Material: Brass (Cu ≥ 59%)
• Soap Dish Brass: Soap Dish Brass
• Product Code: AIBA-99123A
• Guarantee: 3 years *
• Function: Wall Mounted
• Packing: Single Unit packed in Cloth Bag with 3 ply Box 
• OEM & ODM: Accepted
• Finish Option: Chrome Plated / Antique / PVD
• Tastings: Salt Spray Tested (150+ hours) - ASTM B117-11
• Bend Adhesion Tested - ASTM B571-97: Micro Hardness Evaluation – ASTM E384
• Coefficient of Friction Tested: Platting Thickness

Apple India Brass Fittings, Manufactures cable glands & cable connectors for Industrial, Marine, Hazardous area installations and various other Applications & Industries. Cable Glands are produced in a number of different materials. These products uniquely meet an industry's needs - solving an application requirement, providing product innovation, saving installation and component costs and improving the quality of the end product.

• Type: Brass
• Packaging Type: Carton Box
• Material Grade: Lead free Brass
• Usage/Application: Industrial
• Thread Type: Any
• Surface Treatment: Chromium, Nickel Plating

• Size: 16mm to 90mm
• Brass: 319 or BS 249

Throughout the World, Cables requires Glanding, Jointing & Fixing, whether in Hazardous area or Safe Area. AMPL specialize in manufacturing Flame Proof Industrial Cable Glands covering the wide range of armored and non-armored cable in form of various types like BW, CW, E1W, A1A2, PG, Marine type etc. After understanding all the critical feature of the glands, we are committed to manufacture safe, leak proof, flameproof and explosion proof glands to avoid all mishaps & prevent any hazards to the health & property. Key Features: Cable Glands are produced as per BS 6121 Standard. BW type Cable Glands provide an integral armor clamp for armored cable which provides an electrical bond between the cable armor & the gland. A1A2 Gland Provides a single pull resistant seal on the outer sheath of an unarmored cable. This Type gland maintains ingress protection of IP66IP68 to 25 Meters. PG Glands are basically produced as per DIN standard 4632046255 & available with sprain relief facility with round or hex intermediate sockets. Marine Cable Glands as per JIS standards are basically used for Ship Decks & other marine Applications. Material: Brass as per IS 319 or BS 249 or BS 2874:CZ 121 or any high graded brass as per custom specification for main parts & Steel, PVC, LFS, Rubber etc. for various accessories. Sizes & Types: BW, CW, A1A2 & E1W are available in sizes of 16mm to 90mm In L & S type. PG glands are available from 7pg threads to 63pg. Custom sizes can be developed as per custom demand & requirement.

Brass connectors for PVC tanks, Roto Moulded Water Thanks etc. are offered from 3/8" to 2-1/2" in round or hexagonal flange.   We also offer rubber washers and back nuts as accessories. Size 1/2", 3/4", 1", 1-1/4o, 1-1/2", 2-1/2" Threads BSP, BSPT, NPT, NPSM Finish Natural   We are one of the leading manufacturers suppliers exporters of Tank Connectors Brass. Please contact us for all your needs of Tank Connectors Brass from Jamnagar- India at best pricing.

Offering fully brass forged body Angular Stop Cock produced under fully in house facility with export quality.

Brass is a metal alloy made of copper and zinc; the proportions of zinc and copper can be varied to create a range of brasses with varying properties. It is a substitutional alloy: atoms of the two constituents may replace each other within the same crystal structure.The main component of brass is copper. The amount of copper varies between 55% and 95% by weight depending on the type of brass and its intended use. Brasses containing a high percentage of copper are made from electrically refined copper that is at least 99.3% pure to minimize the amount of other materials. Brasses containing a lower percentage of copper can also be made from electrically refined copper, but are more commonly made from less-expensive recycled copper alloy scrap. When recycled scrap is used, the percentages of copper and other materials in the scrap must be known so that the manufacturer can adjust the amounts of materials to be added in order to achieve the desired brass composition.

• WIRE: 1mm TO 8 mm
• HOLLOW RODS: Min Bore Size 20 mm and Max OD 100 mm
• ROUND RODS: 6mm To 130 mm
• HEX: 5mm To 60mm
• SQUARE: 4mm To 60mm
• FLAT: 5mm Min Thickness and max Width 120mm
• PROFILES / SECTIONS: AS per Customer Drawing
• BILLETS: Up to 200mm
• INGOTS: AS per Specification

Brass, Brass Casting, brass parts, Brass Molding Inserts

Tower Bolt Brass, Aluminum Zorik Tower Bolt, Brass Flower Push Magnet

Brass, Precision Brass Turned Components, Hardware Products, Square Nuts

brass metal, Brass Scrap, Honey Products, Brass Products

Brass, Brass Fasteners, Electrical Items, Brass Screws, Brass Bolts

Brass Sheet Cutting metal, brass surgical parts, Brass Valves

brass handle brass, building hardware fittings, architectural fittings

Brass, Brass Products, Btp - 02 Brass Turned Parts