Cable Glands Dealers in Gidc Phase 2, Jamnagar

• Size: 20-40mm,40-60mm,60-80mm,80-100mm
• Material: Brass
• Color: Golden,Light Yellow,Yellow
• Finishing: Non Polished,Polished
• Feature: Durable,Easy To Fit,Fine Finished,Good Quality,Heat Resistance,Light Weight,Rust Resistance
• Usage: Cable Fittings

We manufacture all types of brass cable glands like a2 cable gland, bw2 cable gland, bw4 cable gland, cw4 cable gland, e1w cable gland as per specifications and drawing.

We are offering wide range of very high quality a1 a2 type cable glands to our customers. A2 type cable glands are used with variety of unarmored or rubber sheathed cables. We do take care of the a2 type cable gland in our production unit of their fine delivery of endurance. Brass bs 2874 cz121 pb3, high grade free cutting brass, any special composition as per customer requirement. Brass finish, nickel finish, chrome finish or as specified

• Material: Brass
• Feature: Double Compression
• IP Rating: IP33
• Length: 15 mm
• Plating: Tin plated

• Color: Golden, Light Yellow
• Feature: Durable, Easy To Fit, Fine Finished, Good Quality, Heat Resistance
• Material: Free cutting Brass IS 319 (Type 1) BS 249 (Type 1) High Grade. Any special Brass material composition as per customers requirement
• Finish & Coating: Natural,Nickle Plated,Tin Plated or any coating as per customers
• Temprature Range: - 40 to 80 Degree C

We are manufactures cable glands & cable connectors for Industrial, Marine, Hazardous area installations and various other Applications & Industries. Cable Glands are available to suit a range of applications, covering a variety of international wiring codes, and with a wide selection of approvals. Following types of Brass Cable Glands Available : A1 Brass Cable Gland A2 Brass Cable Gland Alco Type Brass Cable Glands BW Brass Cable Glands BWF Type Brass Cable Glands BWR Type Brass Cable Glands CW Type Brass Cable Gland CXT Type Cable Glands E1W Type Brass Cable Gland IP68 Type Brass Cable Glands PG Type Brass Cable Gland SWA Type Brass Cable Galnds Wiping Brass Cable Glands Material Free Cutting Brass IS 319 Type I or BS 249 Type I. Any Special Non Ferrous Material Grade. Brass as per RoHS Directive Thread ISO Metric (MM Threads) Any as per customize Specification Size Apart from standard, We develop customize parts as per technical drawing or other relevent data. Finish Buff Nickle Plated Silver Plated Tin Plated As per customer Specification

• Finishing: Polished

• Size: PG 7 to PG 48 and M12 to M63

Size: PG 7 to PG 48 and M12 to M63 Standard: EN 60259 Application: Suitable for indoor and outdoor conditions for unarmour cable. Operating Temp: -25 ° to 80°C Material: Nickel Plated Brass Accessories: Lock Nut

Counted among the renowned Manufacturers and Suppliers, our organization is engaged in offering a wide range of Brass Cable Glands from Jamnagar, Gujarat. Brass Cable Glands, we deal in, are widely used to attach and secure the end of cable to the equipment. Brass Cable Glands have excellent tensile strength and available with us in different technical specifications. We can provide Brass Cable Glands all over the country.Type : BW, CW, E1W, A1/A2, PG, marine type etc.Material : Brass as per is 319 or BS 249 or BS 2874: cz 121 or any high graded brass as per custom specification for main parts & steel, PVC, LFS, rubber etc. For various accessories.Sizes & types : BW, CW, A1/A2 & E1w are available in sizes of 16mm to 90mm in l & s type. Pg glands are available from 7pg threads to 63pg. Custom sizes can be developed as per custom demand & requirement.Key Features : Cable glands are produced as per BS 6121 standard. Bw type cable glands provide an integral armor clamp for armored cable which provides an electrical bond between the cable armor & the gland. A1/a2 gland provides a single pull resistant seal on the outer sheath of an unarmored cable. This type gland maintains ingress protection of ip66/ip68 to 25 meters. Pg glands are basically produced as per din standard 46320/46255 & available with sprain relief facility with round or hex intermediate sockets. Marine cable glands as per JIS standards are basically used for ship decks & other marine applications. Finish Accessories : Various cable glands are available in kits packs with accessories viz. , lock nuts, PVC shrouds or LSF shrouds and brass earth tags. Any special accessory can be incorporated in kit pack as per custom requirement. Natural, nickel, tin, chrome are in usual trend or any as per custom demand. Material : Free Cutting Brass IS 319 Type (I) or Free Cutting Brass as per BS 249 Type (I) or High Grade Free Cutting Brass. Any Special Brass Material Composition as per customer’s requirement. Sizes : For A1/A2 Type Cable Glands: 20mm to 90mm. For BW Type Cable Glands: 20mm to 90mm. For CW Type Cable Glands: 20mm to 90mm with S & L. For E1W Type Cable Glands: 20mm to 90mm with S&L. For PG Cable Glands: PG 7 to PG 48. Applications : Dry Indoor, for use with all types of SWA Cable, for indoor or outdoor use with all types of SWA Cable, Outdoor or Indoor for use with all types of Unarmored Cable.Finishing : Natural, Nickel Finish, Chrome Finish or as per specification. Any kind of Brass Cable Glands developed and supplied exactly as per customer specifications.

• Size: 20-40mm
• Type: Brass Cable Glands
• Color: Golden
• Condition: Good, New
• Finishing: Non Polished
• Feature: Durable, Fine Finished, Heat Resistance
• Material: Brass

• Material: Brass
• Brand Name: Bhumi Brass
• Cable Diameter: 1 Inch
• Length: 15 mm Approx.
• Plating: Tin plated

We are offering cw cable gland 20 mm to 90 mm s & l application : use with swa, plastic and rubber (elastomer) sheathed cables. Dry indoor application for armoured cable.

Size :16mm to 115mm and 38" to 4" Standard :BS 6121:Part-1:2005, EN 50262: 1999 Function :Providing seal on outer sheaths of unarmored cable in indoor and outdoor area. Ingress Protection :IP65 Material :Brass BS 2874 Thread :Metric and BSP Operating Temp. :-20°C to +80°C Features :Outer Compression seal

Suitable for single wire armoured, plastic or rubber sheathed cables Application for use in dry, indoor situations Low cost two part design also available on request Shroud may be used for additional ingress protection Seal rated to IP 54 Finish Natural Brass and also available in Electro Tinned and Nickel Platting.

• Color: Golden
• Material: Brass
• Size: 1/2 inch to 5 inch
• Finishing: Brass Finish
• Technique: Hot Rolled

We are one of the prominent Manufacturers and Suppliers of Brass Cable Gland. The Brass Cable Gland is known for protecting SWA cable termination and continuity of armored wire. We use one premium grade raw materials in manufacturing this Brass Cable Gland. Specifications Size Range : 16mm-90mmPlating : Nickle, Chrome, Yellow PlatingMaterial : Brass –CuZn39Pb3 B.S. 2874 CZ121 Pb3Standard : BS 6121

Conforms : BS 6121 : Part 1 Size : 20 mm to 99 mm (S& L) Application : For use with SWA, plastic or rubber sheathed cables. Mainly indoor use. Easy to use saves time & money. Provides mechanical cable retention and earth continuity.

PG Cable Gland To DIN - 46320/46255 . Available with strain relief facility with round or hex intermediate sockets. Available in long and short antithreads. Gland size: PG 9 to PG 56  All the Cable Glands are available with accessories and Earth Tags. Material: Free Cutting Brass IS 319 type (i) or Free Cutting Brass as per BS 249 type (i) or High Grade Free Cutting Brass or Any special Brass Material Composition as per customers requirement Threads : ISO Metric (MM Threads). Finish And Coating : Natural, Nickle Plated, Tin Plated or any coating as per customer specification. Any kind of special Brass Cable Glands can be developed and supplied exactly as per customer specifications.

Material      Free Cutting Brass IS 319 Type (I) or BS 249 Type (I) or High Grade      Any Special Brass Material Composition as Per Customers Requirement Threads     ISO Metric (MM Threads) Finish And Coating     Natural, Nickle Plated, Tin Plated Brass Cable Glands or Any Coating As Per Customer Specification.     Any Kind of Special Brass Cable Gland Can Be Developed and Supplied Exactly as Per Customer Specifications.

When you source your requirements from us, you are dealing with a company that… 1. Is Old And Experienced? 2. Is ISO 9001:2008 Certified With A Thrust On Quality Control? 3. Has In-House Designing Facility? 4. Is Equipped With Professional Designing Software? 5. Has Been Supplying Regularly To Leading Industries Like Atlantic Engee Tech? 6. Can Tackle All Your Brass Cable Glands Requirements Including Supply And Erection On Turn-Key Basis? Atlantic Engee Tech is Manufacturer and Exporter of Brass Bushing, Brass Cable Glands, Brass Cable Gripper, Brass Casket Parts, Brass electricalParts, Brass Forged Fitting, Brass Gas Parts, Brass Inserts, Brass Lpg Fittings, Brass Nipple, Brass Nuts, Brass Precision Components, Brass Quick Coupling, Brass Sanitary Parts, Brass Screws, Brass Swivel Parts, Brass Valves, Chrome Plated Parts and Copper Components. All Kinds of Brass Cable Glands can be developed as per customer’s specifications.

We make available the optimum quality Brass Cable Glands to the clients. Our Brass Cable Glands are highly durable and resistant to corrosion. These Brass Cable Glands are designed in compliance with the set industrial parameters and are of use in different industries. Our Brass Cable Glands have accurate dimension and they offer perfect fitting. Order Information Minimum Order Quantity : 5000 piecesPackaging Details : 50 kg bagDelivery Time : 10 days

Application:   For use with SWA, Plastic and Rubber (Elastomer) sheathed cables. Indoor & Outdoor whenever it is equired to provide sealing on cable outer sheath.       Sizes:   Metric - 20mm to 75mm (S/L) Imperial - 3/4" to 3" (S/L)      Function:   BW glands are weatherproof glands and can be used in corrosive conditions when protected with shroud. Positive armour locking, effective earth continuity, increased mechanical strength.

•  Sizes:: G 204 TO G 755
•  Application:: Use with SWA, plastic and rubber sheathed cables
•  Use:: Dry indoor application for armoured cable
•  Material:: Brass and Nickle plated

Use with SWA, plastic and rubber sheathed cables, Dry indoor application for armoured cable, Brass and Nickle plated.

We manufacture various types of Cable Glands like BW Cable Gland, CW Cable Gland, E1W Cable Gland, G Type Alco Cable Gland, TRS Cable Gland, A1A2 Cable Gland and Marine Gland. These cable glands are used for various indoor outdoor applications.For use with unarmoured cable with rubber outer sheath. Secures outer sheath of cable. Displacement seal concept makes it suitable for Indoor and outdoor application.

We are offering cable gland. Looking for brass components to suit your needs? then you’ve come to the right place.with over 35 years of experience in manufacturing turned brass components, no job is too small for us. Some of our wide range of products include: cable glands cable gland accessories brass earthing accessories brass inserts brass components

Brass Cable Glands offered by us are used for all types of electrical power, control, instrumentation, data and telecommunications cables. These Brass Cable Glands are used as a sealing and termination device to ensure that the characteristics of the enclosure, which the cable enters, are maintained adequately.

• Brand Name: MRP Enterprise
• Material: Brass
• Technique: Hot Rolled
• Finish And Coating: Powder Coated
• Rust Proof: Yes
• Pack Size: 10 kg-60 kg