Construction Machine Dealers in Jamnagar

We are looked upon as one of the supreme square wire straightening machines manufacturers & exporters from india. Our square wire straightening machines are widely demanded for square, hex & strip straightening. Sizes available : diameter 4mm to 10mmdiameter 10mm to 25mm diameter 25mm to 50mmlength = as per wire size attributes : c channel heavy structurestotal roll = 13 nos.strip size adjustable setting by 8 slidesheavy duty reduction gear box as per machine. Uses : use in rod straightening (hex, strip & square rod/wire)use in brass, copper & alloy material extrusion planuse in rolling milluse in fasteners manufacturersuse in straightening in gold rod colors available : green and blueblue & yellowas per customers

• Driven Type: Electric

Ajanta engineering works are largest manufacturing of wire, stripe, section straightening machine and straightening with cutting machine. These machines for round, square, hexagons and any type of section in any metrical in rang of 1 mm to 100mm. Capacity, it is very useful for extrusions plan and other factory where rod,wire, stripe, section straightening requirement, machine is very accurate for straightening. It comes in many models. The company also manufacturing typical application of small parts straightening machine likes stamping, clutch plates, washer and other where precision straightening requires. Parts of machines are made by steels hard and ground as per requirement. Prices of the machines are very economy. The company also manufacturing brass & copper metal components as per costumer’s requirement.

Our company is engaged in the manufacturing, exporting & supplying of Pan Mixture Machine. Different types of graded iron, casted iron bed, mild steel channel, gearbox, etc. is used in the manufacturing of Pan Mixture Machine. Our Pan Mixture Machine is widely used for construction purposes like making bricks, crushed furnesh soil, etc. Our Pan Mixture Machine is extremely durable and efficient. The Pan Mixture Machine is available in round diameter of 72 inches onwards. Highlights : Graded ironUsed for construction purposesDurableSturdyAvailable in varied sizes and dimensions Packaging Material : Wooden box

We are known in the industry for offering a superior quality range of Brass Washer to consumer. Features: Toughness Highly durable Smooth finish Other Details: Highly durable Specified sizes dimensions Dimensional accuracy Specifications: Type: Flat Gasket Processing Type: Shaping Material: Stainless steel, brass, Copper.

• Material: White Brass
• Application: Bathroom Fittings
• Finishing: Polished
• Mounting Style: Wall Mounted
• Color: Silver
• Material: White Brass
• Valve Core Material: Brass

• Size: Standard
• Type: Solid
• Material: Tungsten Carbide
• Certification: ISI Certified
• Color: Metallic
• Blade Finishing: Coated
• Brand Name: Maruti Suzuki

• Material: Brass, Stainless Steel, Carbon Steel, Copper
• Brand Name: Deepak
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

• Thickness Cutting Capacity: upto 100 mm
• Length Cutting Capacity: upto 50 mm
• Power Require: 5 HP

This Block Cutting Machine is fully Automatic, operated by Pneumatic System and Electricals. This machine gives mass production of blocks and is also very safe for the workers.

• Brand Name: MICO HYDRAULICS

We offer 100 mt hydraulic fly ash brick making machine is fully automated machine with capacity to produce 11520 fly ash bricks in shift of 8 hours. The machine comes with following technical specifications: press capacity 100 mt working pressure 220 kgcm2 approach speed 60 mm pressing speed 15 mmsec return speed 100 mmsec ram stroke 600 mm dilate gap 600 mm number of bricks produced in one shot 68 piece poweder loading cylinder 5 mt bricks unloading cylinder 5 mt 5hp mixture -on either side of the conveyor belt 2 nos mixture pan capacity (both mixture pans put together) 400 kg 2hp conveyor 2 no runway table-extendable 3 feet idle cycle time 20 seconds table size 850*550*245 mm motor capacity 20 hp kirloskar make ejector capacity 10 mt pump yuken make hydraulic valve rexroth oil tank capacity 300 liters oil cooler 1 no.

We are offering straightening cum cutting machine. ajanta engineering works are largest manufacturing of wire, stripe, section straightening machine and straightening with cutting machine. These machines for round, square, hexagons and any type of section in any metrical in rang of 1 mm to 75mm.capecity, it is very useful for extrusions plan and other factory where wire, stripe, section straightening requirement, machine is very accurate for straightening. It comes in many models. The company also manufacturing typical application of small parts straightening machine likes stamping, clutch plates, washer and other where precision straightening requires. Parts of machines are made by steels hard and ground as per requirement. Prices of the machines are very economy. The company also manufacturing brass & copper metal components as per costumer’s requirement. an iso 9001 : 2008 certified company address. ajanta engineering works c-2 / 311, g.i.d.c., shanker tekri, udyognagar, jamnagar-361004 (gujarat) india. tel-fax: - 91- 0288 2561956, cell: 09825071956, 09426049712 e-mail:-ajanta311@yahoo.com, ajanta311@gmail.com

The design is conceptualized on the requirement of bar cutting of SS material for Bar sizes of 350 mm in diameter to be cut in practically half the time then normal time taken to cut it in full. The cutting is dry cutting standard circular saw. Very high speed and high capacity spindle motors are used for the operation. Two cutters would approach the bar simultaneously for cutting up to nearing the center of the bar, and thereafter the bar would rotate to complete the cutting. The machine is highly efficient for productivity and fully automatic to offer accurate bar cuttings for the steel industry. It can be custom made to handle any type of bar size and length.

Pipe bending pulley and dai manufacturing and supplies. all hardware and valves repairing and overhauling at your plant site.

• Thickness Cutting Capacity: upto 100 mm
• Length Cutting Capacity: upto 50 mm

This Block Cutting Machine is fully Automatic, operated by Pneumatic System and Electricals. This machine gives mass production of blocks and is also very safe for the workers.

Standard Specification Followed : : We shall be pleased to develop Brass S.S. Copper Bronze Pressings pressed parts components pressworkAlso available special pressed parts pressings and deep drawn components forSwitchgears, Transformers, Elevators, Heaters and other electromechanical applications as per specific requirements. Size : Plain washers to BS 4320: 1968 DIN 125, 433 and 9021 Material : Pressing and pressed parts upto 5mm thickness can be provided on 400 tonnes Press.Auto pressed parts and Pressings for automotive use in stainless steel Brass shims pressed nuts Brass terminals auto parts avaialble Brass, Copper, Stainless Steel (S.S.) (A2 A4) and Vulcanized red fibre.Bronze Finish Natural, Nickel, Electro-Tin etc. Note Available Stainless Steel deep drawing facility for Cutlery and Utensils Brass Washers are Manufactured From Brass Sheets. Any Special Brass Material Composition As Per Customers Requirement. Any kind of washers can be developed and supplied exactly as per customer specifications, design and requirement.

• ROLL Material Hardness :: 55 to 60 HRC
• ROLL Material :: 52100 / WPS / EN21

1) Used of wire type: HEX / SQUARE / PATTI / PATTA / RECTANGULAR 2) Wire sizes ranging from 3mm to 50mm (Light – Medium – Heavy) 3) No used of casted material in whole machine – only made from MS STRACTURE PLATE 4) ROLL Material : 52100 / WPS / EN21 5) ROLL Material Hardness : 55 to 60 HRC 6) 8 Nos. SLIDE made from Graded Casting 7) 13 Nos. Rolls (100mm / 150mm / 160mm Dia) (Length 100mm) 8) Gear Chakker MS (9 DP to 12 DP)  9) Gear Box : 30 x 1 (RPM) Light Duty (3 nos.)                              : 40 x 1 (RPM) Medium Duty (4 nos.)                              : 40 x 1 (RPM) Heavy Duty

  We are able to Develop & Supplie Standared or Non - Standard Washers as per Customers Drawings, Specification, Design, Samples & Requirement.   Material Brass, Copper, phosphor Bronze ( PB ), Aluminium, Mild steel, Stainless Steel, Finish Natural Nickle Plated Tin Plated or Any type of Coating As Per Customer Specification    

We offer Spring Washer to the customers that can be square or flat in shape. We use premium raw material to manufacture Spring Washers, and therefore they are highly durable and reliable. Spring Washer, offered by us, has flawless finish and offers high resistance to corrosion. Hence, we are considered as noteworthy Spring Washer Manufacturer and Supplier in the industry. Material : Mild Steel (MS) Finishing : White Zinc Platting Blue Zinc Platting Yellow Zinc Platting Nickel Platting Silver Platting Trivalent Zinc Any other coating as per customer requirements.

10 mm stone crusher

We are one of the well established manufacturer a wide range of Fly Ash Brick Making Machine

ceramic machines, ceramic machine parts, Clay, Industrial Chemicals

Tile Abrasion Testing Machine

We are one of the most preeminent washers manufacturers in India. The the Washers cater to the specific requirements of different industrial sectors.

Concrete Mixing Plant, Asphalt Mixing Plant, Asphalt Plant, Bitumen Sprayer

We are offering best Washers supplying company.

Automation Draw Bench Brass And Copper Road Machine

Washers, Battery Terminals, Billets, Building Hardware, Cable Glands

WE ARE ALSO EXPERT & REGULAR TRANSPORTATION CONSTRUCTION MACHINERY FROM SITE TO SITE ANY WHERE OF INDIA. PLEASE SEND YOUR INQUIRY . CELL NO; +919879541385 +919426521385 info@jottilogistics.com www.jottilogistics.com

Washers, Compression Cable Gland, Nozzles, Nipple, Hinges, Ferrules

Washers, metal components, Brass Bolts, Brass Anchors, Connectors