Lathe Machines Dealers in Jam, Jamnagar

• Color: Green
• Material: Mild Steel
• Frequency: 50-60Hz
• Voltage: 220-240 V
• Driven Type: Electric
• Layout: Horizontal
• Surface Treatment: Polished

Precision lathe PD 250/E Centre distance 250mm. Swing 70mm. Height over cross slide 43mm.Machine bed: Of cast iron, wide-legged prismatic guide. For vibration- free work even at high loads. Rear flange for mounting the mill/ drill head PF 230. Covered lead spindle.Headstock: Of die-cast aluminium. Precision bearing mounted main spindle (run-out without chuck 1/100mm) with 10.5mm opening. Chuck side 70mm hollowed to 14mm. With MK 2 bore. Rotary switch for engaging the automatic feed via lead and feed spindle (optionally 0.05 or 0.1mm/rev.).Tailstock: Of die-cast aluminium. Sleeve Ø 20mm, retractable up to 30mm. With millimetre scale, MK 1 bore and live centre.Support: Bed carriage made of die-cast zinc. Cross slide and top slide of steel (adjustment 60 or 45mm). Turning tool post for cutting tools size 8 x 8mm. Drive: Quiet DC special motor with 3-stage belt drive for 300 – 900 and 3,000rpm. With additional speed control (full-wave electronics) continuously adjustable to 100 – 300 or 1,000rpm, depending on belt ratio. Clockwise - anticlockwise rotation. Main switch with emergency stop function and restart protection.Lathe chuck: High quality 3-jaw chuck as per DIN 8386 Class 1 (concentricity tolerance 0.04mm). Capacity through reversing jaws from 2 - 75mm. Including lathe chuck guard with safety shutdown.Handwheels: Of aluminium, with adjustable scale ring (1 division = 0.05mm, 1 revolution = 1mm).Thread cutting device: With change gears for left-hand and righthand threads of the most important metric pitches (0.5 – 0.625 – 0.7 – 0.75 – 0.8 – 1 – 1.25 – 1.5mm).Other technical data:230V. 50/60Hz. Size L 560, W 270, H 170mm. Weight approx. 12kg.

We are specialized in offering our clients a comprehensive range of heavy duty geared lathe machine. These machines are fabricated using superior quality raw material, and known for their sturdy construction, high performance and noiseless operation. Our range of lathe machines are suitable for bulk production, and are used for all sliding, surfacing and screw cutting operation and find wide applications in various industries. Available in various specifications, these machines can also be custom made as per the clients requirements. Specification: height of center 650 mm swing over bed 1300 mm swing over cross slide 1000 movement of cross slide 650 admit betn center 4000 mm bed width 560 mm spindle bore 110 mm no. Of speedrange 12201950 main motor 15 hp yes! I am interested all geared precision latherequest callback click to zoom ask for price we also offer light duty precision all geared lathe machines that are used in numerous engineering industries to conduct cutting, drilling & deformation operations. The clients can avail these at industry leading prices from us, and have it delivered at their doorstep within the stipulated time limit. Given below are the technical specifications of this machine: height of center 200 mm 250 mm swing over bed 400 mm 500 mm swing over cross slide 210 mm 280 mm movement of cross slide 200 mm 250 mm admit betn centers 1000 mm 1500 mm bed width 280 mm 280 mm spindle bore 40 mm 50 mm no. Of speedrange 840-1000 870-1000 no. Of feed 40 40 main motor 3 hp 3 hp yes! I am interested looking for lathe machine ? thank you your enquiry has been sent successfully. Describe your requirement in detail: mr.ms.mrs.dr. your contact information:(not me)

This is a specially designed CNC Roll Groove Turning machine used for turning of the three rolls fitted to the SRM – Stretch Reducing Millstands used in the PQF mills. The rolls are machined in an in situ condition on the stands meaning that the rolls are not taken out of the stands for machining but all the three rolls are machined in the assembled condition in the stand under the required accuracies. The concentricity of all the three grooves, root diameter of the rollers, centering of the stand etc is taken into consideration for the accuracies of the stand to produce a perfect pipe on the PQF mill. The stands are used in order to maintain the sizing, finishing and to control the geometrical tolerances of the pipes. The machine is used to redress the worn out surfaces of the rollers in the SRM stands to achieve the required accuracies on the pipes. Once the rolls are machined, the same stands can be used in the PQF mills for producing the required pipes. Therefore it is also called a Callibration machine. Special cycles are developed for machining these rolls on the stands. The cycle uses interpolation of the axes to get the machining done. Specially designed probe cycle us also used to assess the pre and the post machining parameters. A combination of mathematical formulas, intense mathematical calculations and features of a high end CNC comtroller used to program the cycles has been successfully designed to meet the requirement of this application.  The result of using this machine for calibrating the stands is extraordinary in terms of accuracy on the end product – the pipes, and in terms of the time taken in getting the job done which is highly productive and in turn profitable to the company. Similar machine is developed for mills using round stands also. The machine is fully automatic and is customized for the specific sizes of the roll stands of width 250 mm and 390 mm and length of 660 mm and 1100 mm respectively with the roll diameter of 275 mm and 450 mm respectively. A loading and un-loading system is also specially designed for the machine to suit the customer requirement. The machine was an import substitute and can prove to be very cost effective for the international market also in terms of capital costs, time and productivity. Specially designed in line degreasing system was introduced for the first time in one of these machine which cleans the OD and ID of the billets with hot water, alkaline solution and hot air before placing them on to the unloading table. This was conceptualized for one of our customers using this machine. The system was accurate and cost effective for the customer.

Bench Lathes, cnc horizontal milling machine, motor winding machine

nagmati lathes machine, nagmati lathes machines

Cutting Machine

Battery Terminal, battery terminal machine, chaniya cholis

flange facing machines, cnc boring machines, cold saw cutting machine

Turning Machine, automatic threading machine

boring machine tools

Brass Hardware, battery terminal cap, extrusion press

All Geared Lathe Machine, Alloy Wheels, Alloy Casting

Used Lathe Machine