MANEK METAL CRAFT GIDC Phase-2, Jamnagar, Gujarat

Manufactured for low and medium pressure, these fittings are quick connecting and have high resistance to vibration damage.

Always consult hose and/or tubing specifications for media compatibility,pressure and temparature rating.

Manufactured with threads which conform with the American standard taper pipe thread and have a good resistance to vibration and pipe movement.Tapered threads of the pipe mesh with tapered thread of fitting form an air tight seal. Recommended uses:copper, brass and iron pipe   Working temperature: –65°F to 250°F   Material: 1) Bar Stock  CA360 2) Forged CA377 Working pressure: 1,000 psi   Applications: oil, water, air, natural gas, and liquified petroleum product

Generally made in accordance with SAEJ512 and designed for use with copper, brass, aluminum and welded steel hydraulic tubing and flared like S.A.E. 45°flared fittings. A long nut is useful for excessive vibration.To make a connection, place the nut over the tubing, threaded end toward the tubing end to be flared. Flare tubing to create a 45°flare. The tube flare is clamped between nut and flare seat of body when screwed together. When assembly is tightened with a wrench, a leak-proof metal-to-metal joint is created.   Recommended uses:copper, brass, aluminum and welded steel hydraulic tubing Working temperatures:-65°F to 250°F   Material: Brass CA-360 (some steel)   Application:fuel and oil lines, automotive brake, LP and natural gas connections

Always consult hose and/or tubing specifications for media compatibility,pressure and temparature rating.   Working temperature:-40°F to 160°F   Material:1) Bar Stock  CA360 2) Forged CA377 Working pressure: 150 psi maximum based on hose/tubing size.   Applications: Air, water and other low pressure fluids conveyed via low pressure hose or thermoplastic tubing.Always consult hose and/or tubing specifications for media compatibility,pressure and temparature rating.   Working temperature:-40°F to 160°F   Material:1) Bar Stock  CA360 2) Forged CA377 Working pressure: 150 psi maximum based on hose/tubing size.   Applications: Air, water and other low pressure fluids conveyed via low pressure hose or thermoplastic tubing.

Materials: CA360   Vibration Resistance: Good   Working Pressure: 150 PSI Maximum based on hose size ALWAYS consult hose specifications   Conformance: ALWAYS consult hose and/or tubing specifications for media compatibility, pressure and temperature ratings   Applications: Garden hose applications which do not exceed 150 PSI including water, irrigation, car wash and piping systems.   Temperature Range:35 to +100°F2 to +38°C   Advantage:No assembly equipment requiredApplicable in wider range of applications

Manufactured in accordance with S.A.E. A long nut is available for applications with excessive vibration. To make a connection, place nut with threaded end toward tubing end to be flared. Flare tubing to create a 45°flare. Tube flare is clamped between nut and fitting flare when screwed together. A leak proof, metal-to-metal joint is created when assembly is tightened with a wrench. Disconnecting and reconnecting do not weaken the fitting joint.   Recommended uses: copper, brass, aluminum and welded steel hydraulic tubing that can be flared   Working temperature: –65°F to 250°F   Material: 1) Bar Stock  CA360    2) Forged CA377   Working pressure: depends on temperature and the type of tubing used   Application: fuel, air, oil, water, LP and natural gas lines

Meets D.O.T air brake specifications. Use with S.A.E.J844 type A and B nylon tubing. Easy to assemble, no flaring needed. Also meets S.A.E. standards, S.A.E.J246 and S.A.E.J1131. To assemble, cut tubing squarely. Insert tubing into fitting until bottomed on seat. Then tighten nut so one thread remains visible on fitting body.   Working temperature:-40°F to 200°F   Material:1) Bar Stock  CA360 2) Forged CA377 Working pressure:up to 150 psi   Applications:air brake system and cab air controls     2) HOSE ENDS AIR BRAKE FITTINGS Designed for use on truck and bus compressed air brake systems. Meets S.A.E. J1402C (formerly Type B) and D.O.T. FMVSS-106 specifications. Intended exclusively for use with 876 and 878 hose.   Working temperature:-63°F to 250°F   Material: BRASS CA-360   Working pressure:125 psi Maximum burst pressure:900 psi   Applications: truck and bus compressed air brake systems     3) COPPER TUBE AIR BRAKE FITTINGS Meets requirments of S.A.E. AND DOT as indicated by configuration.   Working temperature:-63°F to 250°F   Material: BRASS CA-360   Working pressure:125 psi Maximum burst pressure:900 psi   Applications :Air brake systems on heavy trucks and trailers that are plumbed with copper tubing

Manufactured for low and medium pressure applications, they should not beused when excessive vibration or tube movement is experienced. Assembly does not require flaring or soldering. To make connection, place nut and then sleeve over tubing and insert tube into body of fitting as far as possible. When nut is tight the wedging action of sleeve between body and nut create a tight leak free connection   Recommended uses:copper, brass and aluminum tubing   Material: 1) Bar Stock  CA360 2) Forged CA377 Working pressure:dependent on temperature and type of tubing   Application:air, oil, water and natural gas line