Oxen Batteries Digvijay Plot, Jamnagar, Gujarat

Motor Type : Asynchronous Induction Synchronous Motor Control Technology : MPPT based VF PWM Motor Driving Method : H-Bridge with PWM signal for variable frequency andvariable voltage Frequency Resolution : 0.1 Hz LPD : Depends on SPV Panels & Pump nverter Efficiency : Better than 95% at full load Overload Capacity : 110% for 5 Minutes, 150% for 1 second MPPT : Inbuilt Early wakeup & late shut down Available, Better result with 1200W panel HP 1-P Input connection (Optional) : Hybrid Model with 230VAC (For 1HP, 2HP & 3HP) 300VAC (For 7.5HP 7 10HP) 3-P Input connection (Optional) : Hybrid Model with 415VAC pump available

Brand Name : OXEN

Max. Voltage : 380

When the single battery voltage is between 10.5 V to 12 V, the inverter unit selects the Mains supply line or Solar Power as the source of charging. Even if the Mains supply is available But solar power is strong inv will charge batteries on solar only & The load is connected to the Mains (if present) in this mode Between 12V to 14V, the battery is charged using the Solar Supply (if present), even if the Mains is present. The load is on Mains in this mode. When the battery voltage reaches 14.2V, the unit switches over to the Inverter mode, charging continues from the solar supply and the load gets shifted from Mains to the Battery(the INV ON indicator lights up) , even if the Mains is present (the Mains Indicator starts flashing to show the presence of Mains). The unit is then supposed to have entered into SOLAR ZONE. In this zone, the Solar energy stored in the battery is utilized, saving the electricity At battery voltage 14.2 V, the charging(either from Solar or from Mains) stops, then starts again when it falls down to 13.8V(when Solar present), again stops at 14.2 V. This is the trickle charging operation If Mains supply cuts off during the solar zone, the unit maintains its ���¢�¯�¿�½�¯�¿�½solar-zone���¢�¯�¿�½�¯�¿�½ mode. Therefore, when the Mains supply resumes, the unit continues to operate in Inverter mode and the load is supplied by the battery. When the battery voltage reaches 11.5V per battery during the solar zone, the unit switches back to the Mains Supply, the charging continues from solar supply and the load gets shifted back on Mains Supply When Mains & Solar Power both are not available inv will start working on battery mode When the battery voltage is below 10.5V, the unit enters a shut down

Uses solid state control circuits, no relays, no warm-up time, for high reliability. High Correction Speed. Quick response time 10 milli sec (half a cycle). Excellent regulation as high as ± 1%. Professional grade ICs and components are used for high reliability. Introduces zero wave-form distortion. Unaffected –by load power factor. Ruggedised construction. Very high efficiency above 95%. Very low No Load losses.

Brand Name : OXEN

The oxen online ups is a reliable, flexible, and cost effective ups for control panels. Some of the features which make this desirable for your preciuos products include: -true on-line double conversion technology -pure sine wave output -spwm technology using igbt -crystal controlled output frequency -wide input voltage tolerance range -smooth and silent operation -excellent dynamic response for step load change -fast automatic correction rate for line and load regulation -high inrush peak current handling capacity -easy to install, use and maintain -inbuilt isolation -generator compatible

Brand Name : OXEN

Application : Medical & Health care, IT System / Networks, Industrial System, BFSI / ATM's, Telecommunication

Phase : Single Phase / Three Phase

Salient features high inrushpeak current handling capacity pure sine wave output high frequency pwm inverter crystal controlled output frequency compact and well engineered architecture smooth and silent operation superior performance to price analysis. Inverter Technology - IGBT Double Conversion Output Voltage - 400415V AC Three Phase Frequency - 50Hz +0.5Hz WaveForm - PWM Sine wave Harmonic Distortion - Less than 3% on Linear Load Inverter Efficiency - >90% Power Factor - 0.8 Overload - 105% Continuous, 300% for 60 sec Crest Factor - 4:1 Phase Displacement - 120° ± 1 Audible Noise - Less than 45 dB at 1 Meter Display - LCD Meter - R,Y,B Output Voltages,Output Currents,DC Voltage,Battery Voltage LEDALARM - Mains ON, Inverter ON, DC Low, Fault & Output Overload PROTECTIONS - Output Overload & Short circuit, Output Over Voltage, DC Under & Over Voltage, Input Under & Over Voltage, Single Phasing

Extremely high purity, corrosion-resistant proprietary Spine alloy ensures longer life. Extremely superfine void-free grain structure ensures corrosion resistance and high operational life. Extra-strong, flexible oxidation-resistant gauntlet for higher performance and extremely long cycle life. Highly puncture-resistant DARAMIC-USA separator minimizes the possibility of internal short circuits. Equally spread positive active material for better functioning and very low top-up Extra-strong, flexible, oxidation-resistant Gauntlet Design-cycle life of over 1250 cycles at 80% Depth of Discharge (DOD)* Ceramic vent plugs with sealed No acid fumes, eco-friendly Heavy-duty terminals

Brand Name : OXEN

High Cranking Power Zero-Maintenance High Heat Tolerance Vibration Resistance Improved Safety Highest Reserve Capacity Factory Charged - Ready to Use Low maintenance for its active life Power-to-weight ratio Long service life Wide operation temperature range Ideal for vehicles, boats, machinery, etc that are not used on a regular basis. High Density pasted plates which improves the life cycle and are resitant to vibration.

Brand Name : OXEN