Bearings Dealers in Jamshedpur

Roller Bearings, Ball Bearings, Tapered Roller Bearings, Roll Neck Bearings, Seals, Lubrications, Refurbishment & Repair

• Material: Alloy Steel
• Shape: Round
• Diameter: 20-150 mm
• Hardness: 60-67 HRC
• Tolerance: +/- 3 mm
• Finish: Powder Coated

SKF hybrid bearings are made as standard of the same steel as the equivalent all-steel bearing. The standard stabilization temperatures are 120 °C for deep grove ball bearings and 150 °C for angular contact ball bearings. For continuous operation above these temperatures it is recommended to use bearings with rings that are dimensionally stabilized for use at higher operating temperatures e.g.

Melting and Moulding Shop Medium Frequency Dual Track Induction Furnace, fully automatic Sand Moulding Plant with 4 nos. of Jolt Squeeze type Moulding Machine and Overhead Cranes. Heat Treatment Shop Fully automatic continuous pusher type heat treatment plant with temperature graph attachment for Hi Chrome & Hyper steel grinding media balls and liner with oil and Air quenching arrangement & fully automatic 2 nos. of batch type furnace with water quenching arrangement for manganese steel castings.

Carbon graphite bushes are used where the temperature is more than 400° F. It is mostly suited where there is corrosive environment, locations inaccessible for thermal lubrication, dusty environment where bearings & lubricants would require protection. In the recent times Graphite Carbon Bushes have replaced conventional bushes and rings of steel for a variety of reasons – Graphite Bushes are Self Lubricating and is ideal where thermal lubricants cannot be used. High temperature is not a problem. Machining on CNC machine to a tolerance of 0.013 mm is easily done. It protects the bearings and provides a smooth surface and has a polishing effect. Very low co-efficient of friction and thermal expansion Resistance to corrosion, chemicals and oxidation Low density Excellent thermal shock Good mechanical strength High temperature resistance  Trouble Shooting- Grit- Any kind of impurities like sand, granules, water particles, oil, dust present in the air can cause breakage of bushes Prolonged idle time/inactivity- Inactivity results in migration of the lubricants away from the bearing area and eventually hardens the lube that remains. When the machine is restarted metal to metal contact occurs immediately which causes breakage of bushes Frequent starts & stops can lead to dry running. If a bearing is immobile for a month or more, the bushes break due to absence of lubricating activity Vibration- even moderate vibration can shorten bearing life Corrosives & large loads can lower bearing lubrication Improper/Misalignment – Prevents smooth action of bearings and can cause burrows on the shaft or on the bearings in a matter of months Solutions used in pulp mills can turn perfectly good steel parts, self lubricated bushings into pitted relics in a very short period. Fluids, semi-fluids passing through pumps and mixers can dissolve bearing lubricants 

Cylindrical Bearings, Bearings, Industrial Bearings, neddle bearings

Centre Bearings, Silicone Hoses, Expansion Joints, Hydraulic Hoses, brake

alumina ceramic balls, refractory ceramic fiber, ceramic glaze

hyper steel grinding media balls, High Chrome Grinding Media Balls

Cnc Grinding Machines

Seal Kits, Chisel, Thru Bolt, Tooth Points

hydraulic rod ends, Hydraulic Accessories, hydraulic cushioning pins

Bearings, Auto Parts, Thrust Washer, Suspension Bushes, steel spring pins

Bearing, bore well pipes, industrial nut bolt, polyvinyl chloride pipes

Babbit Bearing, Pin & 3 Way Cock Valve, Alignment Roller, Iron Wheels

Bearings, power transmission, lubrication, augers, motion control systems

Taper Roller

Bearing, electrical spare parts, Coil, Motor

Fag Bearings

Roller Bearings