Conveyors Dealers in Pal Road, Jodhpur

• Material: Plastic
• Color: Red, White
• Usage: Personal
• Weight: 250gm
• Automation Grade: Manual
• Gender: Unisex

We are offering roller chains simplex, duplex chains.

• Length: 6.00 mm to 30.00 mm
• Diameter: 6.00 mm to 20.00 mm

Cylindrical rollers manufactured by the Kansara Group have the following advantages over the competition. At Kansara, we believe in excellence in our core area i.e. roller manufacturing. As a result, we have steered clear of both forward (i.e. bearings) and backward (i.e. steel and wire) integration. Hence our customers can rest assured that we shall not be competing with them. In short, we are committed to rollers because rollers are our only commitment.

In a conventional convection type oven the air inside the oven, the panels and the entire component is heated to the required temperature. In the process there are attendant heat losses and enormous amount of energy is consumed in direct proportion to the size & weight of the components, the oven etc.

• Size: + 40 µm

Cylindrical Rollers are cylindrical shaped bearings which are used as rolling elements. As the rollers have a greater (linear) contact area with the outer ring due to cylinder structure and distribute loads across a wider surface. Cylindrical rollers have high radial load capacity which makes it suitable for high speed machines. To manufacture cylindrical rollers of different diameters and length pressed steel & machined brass cages are dominantly used. Raw material for cylindrical roller manufacturing process depends upon the application and area where it will be used.

We have engineered and supplied dry type Belt Conveyor blasting machine for flat components for higher production rate. The supplied machine works either on direct pressure or suction-induction principle of blasting. the components are placed on one side of the belt conveyor which carries the job inside the cabinet through side vestibules. Blasting is accomplished by reciprocating blast nozzle arrangement inside the cabinet. after blasting, air blow guns are provided to air wash the blasting components for removing residual abrasive/dust. The operator has to simply unload the job from belt conveyor on other side of the cabinet. Multi blast gun can be provided depending on the production rate. the abrasive recycling is automatic and dust generation through blasting process is collected inside the dust collector, thus keeping environment clean and friendly.

In a conventional Convection type Oven the air inside the oven, the panels and the entire component is heated to the required temperature. In the process there are attendant heat losses and enormous amount of energy is consumed in direct proportion to the size & weight of the components, the oven etc. Subsequently, the component needs to be cooled to be able to be handled. The heat dissipated is released into the shed which again needs to be extracted out into the atmosphere. Now, we bring to you an Infrared Catalytic Heating Ovens with “Quick Heating and Quick Cooling i.e. Quick Cycle” technology. Now, we bring to you an Infrared Catalytic Heating Ovens with “Quick Heating and Quick Cooling i.e. Quick Cycle” technology.

• Type: Vintage Commercial Furniture
• Feature: Industrial, Strong, multiuse, Small
• Wood: Treated Recycle Wood Used
•  :  
• Style: Vintage Industrial Furniture
•  :  

  DESCRIPTION       Vintage Induastrial Cart Table     Fiinish,color & Packing can be customize     Best use in shop,selling cart, serving cart,Commercial use     Reliably constructed     Unique Antique Design Print on Product     Multi use     Very Strong     Made in India

Diabola Conveyor Tunnel Airless Shot Blasting Machine, Glass Beads

Coating material in the form of single wire, cord or powder is melted in an Oxy-fuel gas flame and molten material is atomised by compressed air and accelerates towards specially prepared substrate to form dense strongly adherent coating. This flame spray process carried out correctly is called a "cold process" (relative to the substrate material being coated) as the substrate temperature can be kept low during processing avoiding damage, metallurgical changes and distortion to the substrate material.

Vintage Industrial Iron Rolling Bar Table, DAC R Restaurant Chair

Cylindrical Rollers, Bearings

Bucket Conveyor, Wet Blaster Machines, Diabolo Shot Blasting Machine

Weigh Feeder, Cement Plant, Mini Cement Plant, clinker grinding plant

Pulley, Industrial Machine

Abrasive Products, Flooring nailer

Travelling Trippers

Engineering Equipment, Engineering Parts, Electronic Products

Conveyor Belt Jointing Machine, OM-2010 Vulcanizing Cement