Electric Pumps Dealers in Jodhpur

• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Fully Automatic
• Power: 3-6kw
• Warranty: 1 Year
• Driven: Electric

SURFACE International Grout Pumps consists of positive displacement type of powerful pump of suitable capacity. The pump is coupled with geared motor. The inlet of the pump is connected through Hose Pipe to the outlet of twin grout mix preparation tank. At the outlet of the pipe a by-pass arrangement is provided for regulating pressure and volume of grout mix. The grouting hose pipe of required size is connected through quick action coupling at the outlet of the pump. The other end of grout hose is coupled with grouting nozzle. A pressure gauge is provided at the outlet of the pump to measure the grouting pressure. The selection of the equipment is based on maximum grouting pressure required and the maximum grout mix output desired.

• Type: Arc Spray Equipment
• Color: Brown
• Voltage: 380V
• Driven Type: Electric, Hydraulic
• Warranty: 1year
• Automatic Type: Manual

electric arc spraying is a thermal spraying process that uses an electric arc between two consumable electrodes of the surfacing materials as the heat source. A compressed gas atomizes and propels the molten material to the workpiece. The principle of this process is shown by figure. The two consumable electrode wires are fed by a wire feeder to bring them together at an angle of approximately 30 degrees and to maintain an arc between them. A compressed air jet is located behind and directly in line with the intersecting wires. The wires melt in the arc and the jet of air atomizes the melted metal and propels the fine molten particles to the workpiece. The power source for producing the arc is a direct-current constant-voltage welding machine. The wire feeder is similar to that used for gas metal arc welding except that it feeds two wires. The gun can be hand held or mounted in a holding and movement mechanism. The part or the gun is moved with respect to the other to provide a coating surface on the part. the high temperature of the arc melts the electrode wire faster and deposits particles having higher heat content and greater fluidity than the flame spraying process. The deposition rates are from 3 to 5 times greater and the bond strength is greater 5000-7000 psi. There is coalescence in addition to the mechanical bond. The deposit is denser and coating strength is greater than when using flame spraying. dry compressed air is used for atomizing and propelling the molten metal. A pressure of 80 psi and from 30 to 80 cu ft/min (0.85 to 2.27 cu m/min) is used. Almost any metal that can be drawn into a wire can be sprayed. Following are metals that are arc sprayed: aluminum, babbitt, brass, bronze, copper, molybdenum, monel, nickel, stainless steel, carbon steel, tin, and zinc.

ARC METAL SPRAY SYSTEM It Consists Of : ARC SPRAY GUN MODEL IMC-95 : This Metal Spray System does not require gases like Oxygen, Acetylene/LPG. It require electrical power and compressed air for metal spray. The metal spray production will be high at lower operating and maintenance cost. The Deposited Coating is more dense and fine. The Power Source : It is a DC current rectifier working on a 3-Phase, 380/415/440V, 50/60 Hertz power supply providing a voltage between 18 to 50 volts. The Control Unit : It is normally mounted above the power source and carries the regulators and pressure gauges for the air supply to the spraying gun. One remote control is for stop the operation by operator is attached with control unit by cable. The Twin Wire Spool Stand : The two wires for the two electrodes for the arc are supplied from two insulated wire spools mounted on a stand. Gun Stand : It is for mounting and positioning of Gun in any direction.

In the Arc Spray Process pair of electrically conductive wires are melted by means of an electric arc. The molten material is atomised by compressed air and propelled towards the substrate surface. The impacting molten particles on the substrate rapidly solidify to form a coating. Electric arc spray coatings are normally denser and stronger than their equivalent combustion spray coatings. Low running costs, high spray rates and efficiency make it a good tool for spraying large areas and high production rates. Electric arc spray systems are offered that feed wire by either an air or electrical motor. Electric arc spraying has the advantage of not requiring the use of oxygen and/or a combustible gas.

We are offering SS Submersible Pump. The pump body is made with anti corrosive material with high wear resistance resulting in reduction in running costs and higher pumping efficiency. The Submersible Pump can work continuously for a longer period of time without any trouble. Higher reliability and best results even under harsh conditions make Submersible Pump acceptable to users.The areas were the submersible pumps are used irrigation and other agricultural applications pressure boosting in high-rise buildings municipal and industrial water supply residential water supply from deep wells fire-fighting systems dewatering & mining Our pumps have the following features advanced technology throughout wide range of pumps for various applications long life low weight 100 % fabricated stainless steel pumps water hammer protection resistance to aggressive water optimal hydraulics provide high efficiency and operating costs crafted to excel in state-of-the-art production facilities and high skilled manpower model nos: V4 model are BSP-3A, BSP-5A, BSP-8A. V6 model are BSP-10, BSP-17, BSP-18, BSP-30, BSP-46, BSP-60 V8 model are BSP-77 and BSP-95 V10 model is BSP-125.  

• Material: Mild Steel
• Voltage: 415 V
• Max Flow Rate: 2400 LPH
• Discharge Pressure: 7 Kg
• Phase: 3 Phase

In the Arc Spray process, the raw material in the form of a pair of metallic wires is melted by means of an electric arc. The molten material is atomised by compressed air and propelled towards the workpiece. This gun is the result of our extrenuous R&D Activities which we continually endeavor upon.   The combination of the proven, rugged drive mechanism with the high volume air flow capability, together with a new improved nozzle design, truly makes this gun a state-of-the-art arc spray gun. DC Servo Motor Wire Drive. Simplified maintenance. Quick Disconnect Wire Conduits. Integrated Arc Jets.

• Warranty: 1 Year
• Color: BLACK
• Weight: 3.6 kg
• Coating: THERMAL SPRAY
• After-sales Service Provided: Overseas third-party support available
• Port: ANY PORT
• Supply Ability: 200 Piece/Pieces per Month
• Lead Time: 1 DAY
• Condition: New

Spray Pumps, Herbal Plant

Arc Spray Gun, PORTABLE GRIT BLASTING MACHINE, paint booth system

Pumps

Pumps, Electrical Transformer, Silent Diesel Generator Sets, Electric Motors

Submersible Pump, Elbow, Starter

Arc Spray Gun, HVOF Thermal Spray Gun, plasma spray system, powder feeders

motors pumps, Lawn Mower, Hitachi Power Tools, small garden tools

Hospital operating solutions, animal healthcare products

Submersible Pump, Pump Shaft

electric power savers, PETROL SAVER, Gas Saver, Induction Cooker

Pressure Pump

Pumps