Flame Guns Dealers in Jodhpur

• Material: Mild Steel
• Feature: Corrosion Resistance, Durable, Light Weight
• Rod Feed: By Electric Motor
• Gases Used: Oxygen & Acetylene
• Net Weight: 2.0 Kg
• Consist of: Spray Gun, Control Console, Gas flow meter, Gas Control Unit, Air Control Unit

• Type: Flame Spray Gun
• Material: Mild Steel
• Application: Car, Spraying
• Color: Silver
• Automatic Grade: Manaul
• Power: Gas
• Feature: Corrosion Resistance, Durable
• Working Pressure: Medium

thermal spraying is a group of processes wherein a feedstock material is heated and propelled asindividual particles or droplets onto a surface. The thermal spray gun generates the necessary heat byusing combustible gases or an electric arc. as the materials are heated, they are changed to a plastic ormolten state and are confined and accelerated by a compressed gas stream to the substrate. the particlesstrike the substrate, flatten, and form thin platelets (splats) that conform and adhere to the irregularities of the prepared substrate and to each other. as the sprayed particles impinge upon the surface, they cool andbuild up, splat by splat, into a laminar structure forming the thermal spray coating. figure 2-1 illustrates atypical coating cross section of the laminar structure of oxides and inclusions. the coating that is formedis not homogenous and typically contains a certain degree of porosity, and, in the case of sprayed metals,the coating will contain oxides of the metal. feedstock material may be any substance that can be melted,including metals, metallic compounds, cements, oxides, glasses, and polymers. feedstock materials canbe sprayed as powders, wires, or rods. the bond between the substrate and the coating may bemechanical, chemical, or metallurgical or a combination of these. the properties of the applied coatingare dependent on the feedstock material, the thermal spray process and application parameters, andposttreatment of the applied coating

We are offering of a wide assortment of flame spray gun model imc-95 that sprays pure metals in a wire form. Our range of spray gun is widely appreciated by the clients owing to its high thermal efficiency and low maintenance. Besides, customers can avail these guns at the most affordable prices. a. It sprays pure or alloyed metals such as zinc, aluminium, steel, brass etc. In wire form by using oxygen-acetylene/lpg gases flame and atomized by a blast of compressed air. b. It sprays fast and uses up to 1/8” (3.17mm) wire, irrespective of type of wire, the wire pulling power and high speed is assured. c. The gas head valve is designed for long service life and low maintenance. d. Wire feed can be stopped while the gun remains light. A simple quick action lever operates the wire grip mechanism to start and stop the wire feed instantaneously. e. An improved nozzle provides a uniform distribution of heat around the metallizing wire for maximum thermal efficiency and high spraying speed.

• Color: RED
• Brand Name: BU
• Condition: new
• Usage: THERMAL SPRAY COATING
• Product Name: 12M FLAME SPRAY TORCH/GUN

FLAME SPRAY EQUIPMENT SYSTEM   With the assistance of our experienced professionals, we BU offers wide range of Flame Spray machine that is robust in design and sturdy in construction. Our entire range is dimensionally accurate in nature and ensures smooth and effective applications. In the Flame spray process, the raw material in the form of a single wire, cord or powder, is melted in an oxygen-fuel gas flame. This molten material is atomised by a cone of compressed air and propelled towards the workpiece. We are a leading manufacturer of an Flame Spray machine system that has single hand control for wire weed. BU using high grade raw materials for manufacturing. this flame spray machine system sprays fast and requires low maintenance &  easy to operate.  They are functionally advanced and these flame spray services are very much useful in various kinds of industrial, automobile and mechanical utilities as they provide excellent coating facilities while giving minimum heat input to the base metal. These flame spray services are very much helpful in corrosion control coatings (aluminum and zinc), Babbitt bearings, decorative coatings, EMI and RFI shielding for defense etc. Furthermore, our offered range is quality tested by our professionals.    Features : -  Excellent finish Reliable and efficient Long lasting material quality High tensile strength Corrosion resistant High performance Easy utilization

We make available the Flame Spray Gun, Flame Spray Gun, Flame Spray, Flame Spraying Gun in various technical specifications. Recognized for its high strength, dimensional accuracy, corrosion resistance and other features, the Flame Spray Gun is in high demand among the clients. Avail the Flame Spray Gun from us at rock bottom prices. About Flame Spray Gun : Coating material in the form of single wireCord or powder is melted in an Oxy-fuel gas flame Molten material is atomized by compressed airAccelerates towards specially prepared substrate to form dense strongly adherent coatingFlame spray process carried out correctly is called a "cold process" (relative to the substrate material being coated) As the substrate temperature can be kept low during processing avoiding damage, metallurgical changes Distortion to the substrate material

In the Flame spray process, the raw material in the form of a single wire, cord or powder, is melted in an oxygen-fuel gas flame. This molten material is atomized by a cone of compressed air and propelled towards the workpiece.

• Net Weight: 1.6 Kg.

Spray Gun, Powder feeder, Gas flow meter, Gas control unit, Cooling wand, Hose Unit, Air Control Unit, Separate powder feeder

• Type: Flame Spray Gun
• Material: Forged Steel, Mild Steel, Steel
• Color: As per customer requirement
• Feature: Easy To Hold, High Performance, Premium Quality
• Automatic Grade: Manaul
• Power: Gas
• Country of Origin: India
• Brand Name: Shot Blaster
• Voltage: 220 Volt
• Condition: New

In the Flame spray process, the raw material in the form of a single wire, cord or powder, is melted in an oxygen-fuel gas flame. This molten material is atomised by a cone of compressed air and propelled towards the workpiece.

• Type: Coating Spray Gun
• Condition: New
• Brand Name: METAL COAT
• Supply Ability: 50 Unit/Units per Month
• Packaging Details: Our gun is bubble wrapped and then securely placed in an iron box to protect it while shipping
• Warranty: Unavailable
• Port: Mumbai port

We Make Available the Flame Spray Gun in Various Technical Specifications. Recognized for Its High Strength, Dimensional Accuracy, Corrosion Resistance and other Features, the Flame Spray Gun is in High Demand among the Clients. Avail the Flame Spray Gun from Us At Rock Bottom Prices.

Flame Spray Metallizing Guns, Chilled Iron Grit, Plastic Grit

flame spray gun, arc spray equipment, Wire Arc Spray Coatings

flame spray gun, PORTABLE GRIT BLASTING MACHINE, paint booth system